• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.25-25
• /
• 2012

농업용 비닐하우스에 사용되는 EVA (ethylene-vinylacetate copolymer)고분자 필름의 무적성을 향상시킬 목적으로 EVA 및 PVAc (polyvinylacetate)필름을 가성소다 용액으로 가수분해하여 친수성을 검토하였다. EVA는 분말상의 고분자를 프레스로 압착하여 필름으로 성형하였으며, PVAc는 아세톤에 용해한 후에 필름으로 성형하였다. 가수분해에 따른 필름의 구조변화는 적외선 분광분석으로, 친수성 변화는 접촉각으로 평가하였다. 가수분해 시간이 증가함에 따라 친수성이 증가하였다. 이는 가수분해에 의해 소수성인 아세테이트기가 친수성인 수산기로 변했기 때문으로 생각되었다. 한편, 가수분해시킨 EVA 및 PVAc를 사용하여 프레스로 압착하여 제조한 필름에서는 친수성이 그다지 크게 증가하지 않았다.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.41 no.2
• /
• pp.185-191
• /
• 1992

In this paper, it is attempted to distinguish the charged particles and to judge the polarity by the use of Thermally Stimulated Current(TSC) and Temperature Gradient Thermally Stimulated Surface Potential Measurement(TG-TSSP)with experimental insulation material XLPE-EVA for power cables which is made by blending cross-linked polyethylene(XLPE) and ethylene-vinylacetate copolymer(EVA). In addition, it is performed to investigate the effect of EVA blending. From the experimental results, it is known that for the case of XLPE-EVA blended experimental material, the generation of space charged electric field is not obtained in the high temperature region due to the obatruction of the injection of trapping carrier by the electron and the positive hole.

• The International Journal of Costume Culture
• /
• v.6 no.2
• /
• pp.134-146
• /
• 2003

Polyester of linear homopolymer poly(ethylene terephthalate)(PET) was chemically modified through the formation of branched copolymer to improve the undesirable properties of fiber. Photo-induced graft copolymerization of the acrylic monomers acrylic acid (AA) and methyl acrylate (MA) in the liquid and vapor phase, respectively, onto N,N-dimetylformamide (DMF)-pretreated PET fibers was carried out. The effect of various synthesis conditions and DMF pretreatment of the PET on the graft yield was investigated. Grafting mechanism was analysed. The grafting was promoted by increasing DMF pretreatment temperature and amount of DMF retention in the fiber. The increasing biacetyl and monomer flow time, and irradiation time enhanced the grafting up to a certain amount and thereafter it decreased.

• Macromolecular Research
• /
• v.13 no.3
• /
• pp.229-235
• /
• 2005

Various alkoxyamine initiators for nitroxide mediated radical polymerization (NMRP) were prepared in high yields by a simple substitution reaction of nitroxide anions with benzyl bromide. The required nitroxide anions were easily generated by treating either nitroxide free radicals or hydroxy amine with an alkali metal such as sodium or potassium in THF. This method is both practical and efficient, since the ionic conditions prevent other side reactions from occurring, such as the self-coupling or oligomerization reactions that are observed in the case of radical trapping conditions. To demonstrate the utility of the resulting alkoxyamine initiators, end- and telechelic-alkoxyamine PEG macroinitiators derived from the alkoxyamines were synthesized by a simple chemical modification, and used for the preparation of PEG-b-PS and PS-b-PEG-b-PS block copolymers by NMRP.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.47-47
• /
• 2004

충격하중을 받는 재료의 거동에 관한 연구는 공학의 넓은 분야에 깊은 관계를 가지고 있다. 특히 동적하중을 받는 경계조건 하에서 사용되는 구조물을 정밀하게 설계 제작하는 필요성이 고조됨에 따라 여러 재료들의 고변형률 속도로 변형될 경우에 대한 역학적인 성질이 중요한 과제로 떠오르고 있다. 구조물의 건전성과 신뢰성을 향상시키기 위해서는 구조물이 실제적으로 받는 여러 조건의 하중하에서의 실험적으로 정밀하게 획득된 정확하고, 완벽한 재료 물성치가 필요하다. (중략)

• Macromolecular Research
• /
• v.13 no.6
• /
• pp.499-505
• /
• 2005

Ordered mesoporous materials with a hydrothermally-stable, protozeolitic framework were prepared by exploring the direct conversion of inorganic species based on co-surfactant templating systems. To confer hydrothermal stability on the mesoporous aterials, the organic-inorganic hybrids were heat-treated in strongly basic media. Co-surfactant templating systems of cetyltrimethylammonium bromide [$C_{16}H_{13}(CH_{3})_{3}$NBr, CTAB] with 1,3,5-trim­ethylbenzene (TMB) or a nonionic block copolymer of poly(ethylene oxide )-b-poly(propylene oxide )-b-poly(ethyl­ene oxide) ($EO_{20}PO_{70}EO_{20}$) were employed to improve the hydrothermal stability of the organic-inorganic self-assembly during the solid rearrangement process of the inorganic species. The mesoscopic ordering of the pore structure and geometry was identified by X-ray diffraction, small angle neutron scattering and electron microscopy.

• Journal of Integrative Natural Science
• /
• v.13 no.1
• /
• pp.13-18
• /
• 2020

This study used cerium iron hydroxide nanoparticle with HEMA (2-hydroxyethyl methacrylate), the cross-linker EGDMA (ethylene glycol dimethacrylate), NVP (N-vinyl-2-pyrrolidone) and the initiator AIBN (azobisisobutyronitrile) for copolymerization. Also, the physical properties of the prepared lenses were compared, and their applicability as polymers for ophthalmic materials was experimented. The results of the measurement showed that the UV blocking rate and the wettability increased with the cerium iron hydroxide nanoparticles addition ratio, and the refractive index and water content were not affected. Thus, the produced copolymer is expected to be useful as a functional contact lens material while satisfying the basic physical properties of the hydrogel contact lens.

• Elastomers and Composites
• /
• v.28 no.4
• /
• pp.283-292
• /
• 1993

The morphology and impact strength of alloys of high density polyethylene(HDPE) and nylon-6(PA) with modified $ethylene-{\alpha}-olefin$ copolymer(OCP) as compatibilizer and impact modifier were measured by the scanning electron microscope(SEM) and the notched Izod impact test(and the high rate impact test), respectively. HDPE is incompatible with PA and specimens obtained from simple mechanical mixing show the inferior properties. However, it was indicated that OCP played roles of not only impact modifier but also compatibilizer. High rate impact test results were different from those of the notched Izod impact test, but in both tests OCP was effective for HDPE/PA blends. From SEM observation, the size of the dispersed phase in alloys prepared with OCP is much smaller than that of alloys without OCP and the interfacial adhesion of alloys prepared with OCP is also better. Toughening mechanism of polymer blends was discussed by combining the morphology analysis with mechanical and thermal properties.

• Journal of the Korean Society of Safety
• /
• v.13 no.3
• /
• pp.96-101
• /
• 1998

In order to study the change in mechanical properties and anti-flammablilty of ethylene-ethylacrylate copolymer(EEA) very low density polyethylene(VLDPE) compound that could be used as communication cable sheath using $Mg(OH)_2$ as a non-toxic flame retardant, 100, 125, and 150phr $Mg(OH)_2$ were added to 100 parts of EEA-VLDPE compound, 100 EEA : 0 VLDPE, 50 EEA : 50 VLDPE, and 0 EEA : 100 VLDPE, respectively. $Mg(OH)_2$ was a good non-toxic flame retardant for communication cable sheath and anti-flammability increased with the amount of $Mg(OH)_2$ in compound. The mechanical properties-MI, Ts, and Eb-decreased with increasing in the mixing ratio of EEA but oxygen index(OI) increased with increasing in the amount of EEA. The best composition of $Mg(OH)_2$ in this study was 150phr to 50 EEA : 50 VLDPE compound for the anti-flammability.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.12
• /
• pp.1060-1069
• /
• 1998

Electrical properties such as space charge accumulation and water tree length and physical properties such as tensile strength, elongation and degree of crosslinked polyethylene (XLPE)/ethylene n-butyl acrylate copolymer (EnBA) blends were investigated. It was found that electrical properties such as water tree length grown at a specific condition and AC breakdown strength are improved by blending the XLPE with EnBA. The EnBA having higher nBA content showed the better electrical properties in XLPE/EnBA blends. A further improvement of these properties was achieved when a small amount of crosslinking coagent was used in the preparation of XLPE/EnBA blends.