• 보존과학연구
• /
• 통권29호
• /
• pp.149-162
• /
• 2008

Because stone cultural heritages in Korea are mostly situated outdoors without any notable protection, there are severe damages from physical, chemical and biological weathering. And this in turn causes deformation and structural damage. To counteract this problem and increase durability, various kinds of conservation materials are used in the conservation and restoration treatment. However, there are not many practical and technological experiments on this subject. Accordingly this research is for analysis of effect for treatment to make use a resin of the ethyl silicate for the granite in Mt. Nam of Gyeongju. It takes a long time to confirm the test result regarding durability and side effects of the conservatives after treatment. So we built up an artificial environment through freezing and melting test, and evaluated the conservation materials. As a result of this experiment, porosity and absorptivity was increased in accordance with processing of freezing and melting test. But other things such as elastic wave speed, elastic modulus, uniaxial compressive strength and tensile strength was decreased. It will make a plan to form a method of research systematically for mechanism and element of weathering and to elicit a correlation among experiment of artificial weathering and practical natural weathering from next research.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.146-150
• /
• 1996

A thermal micro actualtor has been fabricated using surface micromachining techniques. It consists of doped ploysilicon as a moving part and TEOS(Tetra Ethyl Ortho Silicate) as a sacrificial layer. The polysilicon was annealed for the reduction of residual stress which is the main cause to its deformation such as bending and buckling. And the newly developed HF VPE(vapor phase etching)process was also used as an effective release method for the elimination of sacrificaial layer. With noliquid involved during any of the steps for relasing, unlike other reported relase techniques, the HF VPE pocess has produced polysilicon microstructures with virtually no process-induced stiction problem. The actuation is incured by the thermal expasion due to current flow in active polysilicon cantilever, which motion is amplified bylever mechanism. The thickness of pllysilicon is 2 .mu. m and the length of active and passive polysilicon cantilever are 500 .mu. m, respectively. The moving distance of polysilicon actuator was experimentally conformed as large as 21 .mu. m at the input voltage level of 10 V and 50Hz square wave. These micro actuator technology can be utilized for the fabrication of MEMS (microlectromechanical system) such as microrelay, which requires large displacement or contact force but relatively slow response.

• 보존과학연구
• /
• 통권30호
• /
• pp.125-136
• /
• 2009

Stone cultural heritages in Korea have a severe damages from chemical and biological weathering because most of them have been situated in outdoors without any suitable protection systems, and this in turn causes deformation and structural damage. To counteract these problems and increase durability, various kinds of conservation materials are used in the conservation and restoration treatments. However until now there are not many practical and technological experiments on this subject. This paper attempts quantitative evaluation of effectiveness about chemical of ethylsilicate based resin for sandstone in Yeongyang-gun. It takes a long time to evaluate durability and side effect after conservation materials treatment. So we use artificial weathering through freezing§ thawing experimental method. As a result of this experiment, porosity and absorptance increased, and elastic wave speed, elastic modules, unconfined compression strength and tensile strength decreased more than before. This study plans to make a scientific method study about weathering factor and mechanism, and to deduce correlation between artificial weathering and natural weathering.

• 한국재료학회지
• /
• 제28권12호
• /
• pp.714-718
• /
• 2018

Anti-reflection thin films are fabricated on glass substrates using the screen printing method. Tetra ethyl silicate(TEOS) and methyl tri methoxy silane(MTMS) are used as starting materials and buthyl carbitol acetate(BCA) and buthyl cellusolve(BC) are mixed to improve the viscosity of the solution. Anti-reflection thin films are fabricated according to the number of the screen mesh and the characteristics improve as the mesh size increases. The transmittance and reflectance of the coated thin film using 325 mesh are about 94 % and 0.43 % in the visible wavelength. The thickness and refractive index of the AR thin film are 107 nm and n = 1.26, respectively.

• Elastomers and Composites
• /
• 제44권4호
• /
• pp.447-454
• /
• 2009

Cloisite 30B가 박리, 분산된 폴리에스테르형 디올을 제조하였다. 먼저, Cloisite 30B에 치환된 2-hydroxyethyl기를 가진 4급 암모늄염을 과량의 adipic acid와 혼합하여 $130^{\circ}C$에서 반응시켜, 에스테르기로 연결하고 양말단에 카르복실기를 가지는 ethyl-ester adipic acid 암모늄염으로 만들었다. 이 과정에서 Cloisite 30B의 실리케이트 층간 간격이 $18.4\;{\AA}$ ($2{\theta}=4.9^{\circ}$)에서 $58.3\;{\AA}$ ($2{\theta}=1.5^{\circ}$)보다 넓게 확장되었다. 층간 간격의 확장은 분자크기가 작은 adipic acid($d{\approx}3.0\;{\AA}$, $L{\approx}9.3\;{\AA}$)가 Cloisite 30B의 층간에서 Cloisite 30B의 2-hydroxyethyl기와 반응하여 분자크기가 커졌기 때문이다. Cloisite 30B가 박리/분산된 adipic acid를 과량의 diethylene glycol([COOH]/[OH]${\approx}0.6$)와 혼합하여 $140^{\circ}C$ 에서 반응시킴으로써 diol을 합성하였다. Acid value로 측정한 전환율은 94%였다. 합성한 diol은 수평균분자량이 830 g/mol, PDI가 1.2로, 평균중합도가 약 7.8인 polyester-diol 형태이다.

• 한국결정성장학회지
• /
• 제1권1호
• /
• pp.92-99
• /
• 1991

$Si(OC_2H_5)_4$ 로부터 $SiO_24$ 미립자를 얻는 반응은 가수분해반응과 종합반응의 두 단계로 이루어지며 중합반응은 $Si(OC_2H_5)_4$의 농도에 대하여 1차 반응이었다. 중합반응의 반응속도상수는 물의 농도와 촉매의 농도가 증가할수록 그리고 반응온도가 높아질수록 커지는 경향을 나타내고 있다. 생성된 실리카의 직경은 $0.06-0.27\mu\textrm{m}$이었으며 직경은 $Si(OC2H5)4$의 초기농도가 작아질수록 온도가 시간에 따라 입자가 성장해가는 속도는 전화율의 함수로 d=a.ln(Xa)+b 의 형태로 나타낼 수 있으며 최종 실리카의 직경은 사수 b값에 접근하였다.

• 공업화학
• /
• 제4권3호
• /
• pp.497-504
• /
• 1993

본 연구는 고온 구조재료 및 전자재료로 주목받고 있는 복합산화물인 mullite($3Al_2O_3${\cdot}2SiO_2$)를 금속알콕사이드에 의한 졸-겔법으로 합성함에 있어서 재활용품으로서의 aluminium foil을 aluminium 금속원으로 사용하여 알루미늄 알콕사이드를 제조하고 $Si(OC_2H_5)_4$와 혼합하여 가수분해 단계에서 건조조절화학첨가제(Drying Control Chemical Additives, DCCA)를 첨가함으로써 건조시간을 단축시키려는 시도를 하였으며 이러한 DCCA가 mullite 물성에 어떠한 영향을 주는지 검토하고자 하였다. 이때 DCCA로 N, N-dimethyl formamide (DMF), Glycerol, 1, 4-Dioxane과 Oxalic acid가 첨가되었으며 건조된 겔을 각 온도별로 소성하여 TG-DTA, FT-IR, XRD 및 SEM을 사용하여 결정의 전이과정 및 각 소성온도에서의 결정상태 등을 관찰하였다. DCCA를 첨가하여 건조시킨 결과 0.1mole의 DMF를 첨가하였을 경우 DCCA를 첨가하지 않았을 때보다 건조시간이 1/2 정도 단축되었으며 분석결과 mullite의 결정형성에 큰 영향을 미치지 않았음을 확인하였다.

• 멤브레인
• /
• 제18권2호
• /
• pp.176-184
• /
• 2008

본 연구에서 졸-겔 방법에 의하여 나노 기공을 가지는 세라믹막을 제조하여 단일 조성의 헬륨과 질소를 가지고 기체투과 실험을 수행하였다. 기공 크기 $0.1{\mu}m$, 기공율 32%의 평막형 ${\alpha}-Al_2O_3$ 지지체를 제조하였으며, 지지체를 담지하여 코팅하는 방법으로 4nm의 기공 크기를 가지는 ${\gamma}-Al_2O_3$ 중간층을 제조하였다. 실리카 졸은 TEOS의 산 촉매 가수분해와 축중합반응을 통하여 합성하였다. 막은 딥코팅과 소결과정을 거쳐 제조되었다. 졸-겔 법에 의해 합성된 세라믹 막을 통한 헬륨, 질소 투과 실험은 기체의 투과 특성을 파악하기 위하여 시행하였다. 질소에 대한 헬륨의 선택도는 $100{\sim}160$ 정도였으며 헬륨의 투과도는 $303{\sim}363K$의 온도 범위에서 $10^{-7}mol/m^2{\cdot}s{\cdot}Pa$ 정도였다.

• 보존과학회지
• /
• 제34권3호
• /
• pp.167-177
• /
• 2018

캄보디아 앙코르 보존소에 소재하는 관음보살은 13세기 바이욘 양식의 석상으로, 중립의 장석질 잡사암으로 조성되었으며 석재 표면에 형성된 담갈색 풍화면에서는 방해석이 관찰되었다. 석상의 상태평가 결과, 박리와 균열의 중첩발생으로 인한 파편화 및 박락으로 인한 물리적 훼손이 심각하였다. 특히 물리적 훼손부 및 주변은 초음파속도가 낮아 입자의 결합력을 향상시킬 수 있는 보존처리가 필요한 상태였다. 이에 따라 석상의 보존환경을 고려한 염풍화의 방재 및 물리적 안정성 확보를 위하여 에틸 실리케이트계 강화제 및 석재와 유사성분의 석분을 배합하여 충전하고 노후된 보수물질을 교체하였다.

• Bulletin of the Korean Chemical Society
• /
• 제33권4호
• /
• pp.1279-1284
• /
• 2012

Silica supported $Cs_{2.5}H_{0.5}PMo_{12}O_{40}$ catalyst was prepared through sol-gel method with ethyl silicate-40 as silicon resource and characterized by X-ray diffraction, infrared spectroscopy, scanning electron microscopy, nitrogen adsorption-desorption and potentiometric titration methods. The $Cs_{2.5}H_{0.5}PMo_{12}O_{40}$ particles with Keggin-type structure well dispersed on the surface of silica, and the catalyst exhibited high surface area and acidity. The catalytic performance of the catalysts for benzene liquid-phase nitration was examined with 65% nitric acid as nitrating agent, and the effects of various parameters were tested, which including temperature, time and amount of catalyst, reactants ratio, especially the recycle of catalyst was emphasized. Benzene was effectively nitrated to mononitro-benzene with high conversion (95%) in optimized conditions. Most importantly, the supported catalyst was proved has excellent stability in the nitration progress, and there were no any other organic solvent and sulfuric acid were used in the reaction system, so the liquid-phase nitration of benzene that we developed was an eco-friendly and attractive alternative for the commercial technology.