• Bulletin of the Korean Chemical Society
• /
• v.34 no.2
• /
• pp.519-523
• /
• 2013

When atomic layer deposition (ALD) is performed on a porous material by using an organometallic precursor, minimum exposure time of the precursor for complete coverage becomes much longer since the ALD is limited by Knudsen diffusion in the pores. In the previous report by Min et al. (Ref. 23), shrinking core model (SCM) was proposed to predict the minimum exposure time of diethylzinc for ZnO ALD on a porous cylindrical alumina monolith. According to the SCM, the minimum exposure time of the precursor is influenced by volumetric density of adsorption sites, effective diffusion coefficient, precursor concentration in gas phase and size of the porous monolith. Here we modify the SCM in order to consider undesirable adsorption of byproduct molecules. $TiO_2$ ALD was performed on the cylindrical alumina monolith by using titanium tetrachloride ($TiCl_4$) and water. We observed that the byproduct (i.e., HCl) of $TiO_2$ ALD can chemically adsorb on adsorption sites, unlike the behavior of the byproduct (i.e., ethane) of ZnO ALD. Consequently, the minimum exposure time of $TiCl_4$ (~16 min) was significantly much shorter than that (~71 min) of DEZ. The predicted minimum exposure time by the modified SCM well agrees with the observed time. In addition, the modified SCM gives an effective diffusion coefficient of $TiCl_4$ of ${\sim}1.78{\times}10^{-2}\;cm^2/s$ in the porous alumina monolith.

• Journal of the Korean Chemical Society
• /
• v.35 no.1
• /
• pp.3-15
• /
• 1991

The gaseous mixtures of iso-propanol of 10 torr with carbon dioxide of 0∼1990 torr were irradiated with Co-60 gamma radiation up to 50 kGy, and the products such as carbon monoxide, acetone, methane, ethane, C$_3$H$_a$, C$_4$H$_b$ and tert-butanol were analyzed by gas chromatography. G(CO) value of 4 was obtained from the gas mixtures containing more than 490 torr of carbon dioxide. The production rates of the organic products and the decomposition rate of iso-propanol increased linearly with the pressure of carbon dioxide, and G(-iso-Propanol) and G(Acetone) values increased by 4 and 2, respectively, with each 10 torr increment of carbon dioxide pressure. The mechanisms of the radiolytic decomposition of iso-propanol and the production of carbon monoxide and organic materials are discussed on the basis of the experimental results of the present study.

• Journal of the Korean Chemical Society
• /
• v.5 no.1
• /
• pp.38-41
• /
• 1961

By varying groups on biologically active molecules, it is possible to produce analogues which sometimes inhibit the action of the parent compound. Such is true of taurine(${\beta}$-amino-ethane sulfonic acid)as an analogue of ${\beta}$-alanine and of pantoyl taurine for pantothenic acid. It seemed possible that the sulfonic acid analogues of amino acids built into peptides might possibly produce inhibition of the parent peptide. Tauryl-L-histidine was selected to prepare as an analogue of carnosine(${\beta}$-alanyl-L-histidine). There were several reasons for this choice. Camosine causes a slight contraction of isolated uterine muscle and inhibition of this action can be easily tested. Also, taurine, being a ${\beta}$-amino sulfonic acid, is much more stable than the ${\beta}$-amino sulfonic acids. Phthalyl tauryl-L-histidine methyl ester was prepared by condensing phthalyl tauryl chloride with histidine methyl ester in chloroform. The yields were quite low possibly due to reaction between the acid chloride and the imidazole of histidine. Approximately 50 per cent yield of crude amorphous product was obtained, but upon purification by crystallization they yielded only 25 percent of a pure product. The methyl ester was removed by acid hydrolysis to prevent partial cleavage of the phthalyl group. Crystalline tauryl histidine was then obtained from this acid by removal of the phthalyl group by hydrazinolysis. Tests for inhibition were carried out by comparing the action of camosine on isolated uterine muscle before and after tauryl histidine had been added to the bath surrounding the muscle strip. Only in very high relative concentrations of tauryl histidine was there any demonstrable inhibition.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.11
• /
• pp.1605-1608
• /
• 2003

To development an immunodetection method for DDT, 1,1,1-trichloro-2,2-bis(4-chorophenyl)ethane (p,p'-DDT) and its metabolites (p,p'-DDA, p,p'-DDE, p,p'-DDD), five derivatives of DDT haptens have been synthesised and characterized as coating ligands for antibody evaluation. The appropriate lengths of linkers were introduced to investigate a matching pair of coating ligand and antibody. Among these hapten derivatives, 2,2-bis(4-chlorophenyl)acetic acid (DDA), 5,5-bis(4-chlorophenyl)-5-hydroxypentanoic acid (DDHP) and 5,5-bis(4-chlorophenyl)-5-chloropentanoic acid (DDCP) were conjugated with keyhole limpet hemocyanin (KLH) for its use as an immunogen. The bovine serum albumin (BSA) conjugates of these derivatives were prepared as a coating ligand for monoclonal antibody screening. Fifteen monoclonal antibody clones were screened using these probes. 6,6-Bis(4-chlorophenyl)-6-hydroxyhexanoic acid (DDHH) and 3-[6,6-Bis(4-chlorophenyl)-6-hydroxyhexanoylamino]propanoic acid (DDHHAP), in addition to the above hapten derivatives, were conjugated to ovualbumin (OVA) and bovine serum albumin (BSA) for their use as coating ligands to measure the titration level of the antibody and the displacement of free analytes. The indirect competitive ELISA results indicate that the titration level and free analyte displacement were greatly influenced by the DDT derivatives and carrier proteins used. Three matching pairs of monoclonal antibodies and coating ligands were selected for the DDT immunoassay: antibody clone 1A3 and coating ligand DDA-OVA, 1A1 and DDHHAP-BSA, and 1A4 and DDHP-OVA.

• The Korean Journal of Physiology and Pharmacology
• /
• v.2 no.3
• /
• pp.395-401
• /
• 1998

We have synthesized new platinum(II) analogs containing 1,2-diaminocyclohexane (dach) as a carrier ligand, 1,3-bis(diphenylphosphino) propane (DPPP) /1,2-bis(diphenylphosphino)ethane (DPPE) as a leaving group and nitrates to improve solubility. In the present study, the cytotoxicity of $[Pt(trans-l-dach)(DPPP)]\;2NO_3$ (KHPC-001) and $[Pt(trans-l-dach)(DPPE)]\;2NO_3$ (KHPC-002) was evaluated and compared on various P-388 cancer cell lines and porcine kidney cell line ($LLC-PK_1$). The new platinum complexes demonstrated high efficacy on P-388 mouse leukemia cell line as well as cisplatin-resistant (P-388/CDDP) and adriamycin-resistant (P-388/ADR) P-388 cell lines. The intracellular platinum content was measured by a flame atomic absorption spectrophotometer (FAAS), and it was comparable to the results of $IC_{50}$ of the three complexes on $LLC-PK_1$ and P-388/S cells, while only DPPE compound was accumulated in high volume in P-388/ADR and P-388/CDDP cells. While the DNA-interstrand cross-links of KHPC-001, KHPC-002 and cisplatin were similar on P-388/S leukemia cells, these new platinum complexes were much less DNA cross-linking to a kidney derived cell line, $LLC-PK_1$. These results indicate that KHPC-001 and KHPC-002 are a third-generation platinum complexes with potent antitumor activity and low nephrotoxicity.

• The Korean Journal of Physiology and Pharmacology
• /
• v.19 no.1
• /
• pp.51-57
• /
• 2015

The etiology of periodontal disease is multifactorial. Exogenous stimuli such as bacterial pathogens can interact with toll-like receptors to activate intracellular calcium signaling in gingival epithelium and other tissues. The triggering of calcium signaling induces the secretion of pro-inflammatory cytokines such as interleukin-8 as part of the inflammatory response; however, the exact mechanism of calcium signaling induced by bacterial toxins when gingival epithelial cells are exposed to pathogens is unclear. Here, we investigate calcium signaling induced by bacteria and expression of inflammatory cytokines in human gingival epithelial cells. We found that peptidoglycan, a constituent of grampositive bacteria and an agonist of toll-like receptor 2, increases intracellular calcium in a concentration-dependent manner. Peptidoglycan-induced calcium signaling was abolished by treatment with blockers of phospholipase C (U73122), inositol 1,4,5-trisphosphate receptors, indicating the release of calcium from intracellular calcium stores. Peptidoglycan-mediated interleukin-8 expression was blocked by U73122 and 1,2-bis(2-aminophenoxy)ethane-N,N,N',N'-tetraacetic acid tetrakis (acetoxymethyl ester). Moreover, interleukin-8 expression was induced by thapsigargin, a selective inhibitor of the sarco/endoplasmic reticulum calcium ATPase, when thapsigargin was treated alone or co-treated with peptidoglycan. These results suggest that the gram-positive bacterial toxin peptidoglycan induces calcium signaling via the phospholipase C/inositol 1,4,5-trisphosphate pathway, and that increased interleukin-8 expression is mediated by intracellular calcium levels in human gingival epithelial cells.

• Journal of the Korean Institute of Gas
• /
• v.2 no.3
• /
• pp.60-69
• /
• 1998

Methane, the major constituent of natural gas, had been converted to higher hydrocarbons by microwave and radio-frequency plasma in vacuum condition. Methane had been activated to plasma by suppling high energy then converted to ethane, ethylene, acetylene. The direct conversion process of methane had produced few by-products and demanded low-energy. The plasma sources were microwave and radio-frequency. Two types of reactor had been used to activate methane. One is common single tubular-type reactor and the other is series coil-type reactor which used for the first time in this study. To produce more C2 products, methane had been converted by a plasma and catalyst. The results of this study could be used to study mechanism of plasma reaction of methane, design the plant-scale reactor.

• Polymer(Korea)
• /
• v.35 no.6
• /
• pp.526-530
• /
• 2011

Furan-2,5-dicarboxylic acid (FDCA) was synthesized by $KMnO_4$ oxidation of 2,5-dihydroxymethylfuran(DHMF) derived from biomass. Polyesters were synthesized by esterification and polycondensation of FDCA with various diols(ethane-1,2-diol, propane-1,3-diol, butane-1,4-diol, hexane-1,6-diol, decane-1,10-diol). The composition of polyesters was characterized by using $^1H$ NMR. Thermal properties of the polyesters were characterized by DSC and TGA. Intrinsic viscosities(IV) of the polyesters were measured to be 0.78~1.2 dL/g comparable with IV of commercial poly(ethylene terephthalate)(PET). As the chain lengths of diols increased, Young's modulus and strength decreased and elongation-to-break generally increased. Young's modulus and strength of the polyesters were measured to be 3551 MPa and 103 MPa, respectively, comparable with commercial PET.

• Advances in environmental research
• /
• v.3 no.2
• /
• pp.151-162
• /
• 2014

Among the combination of 4 different second metals and 3 different noble metals, Ni 10%-Pd 1%/hematite (Ni(10)-Pd(1)/H) showed best tetrachloroethylene (PCE) removal (75.8%) and production of non-toxic products (39.8%) in closed batch reactors under an anaerobic condition. The effect of environmental factors (pH, contents of Ni and Pd in catalyst, and hydrogen gas concentration) on the reductive dechlorination of PCE by Pd-Ni/hematite catalysts was investigated. PCE was degraded less at the condition of Ni(5)/H (13.7%) than at the same condition with Ni(10)/H (20.6%). Removals of PCE were rarely influenced by the experimental condition of different Pd amounts (Pd(1)/H and Pd(3)/H). Acidic to neutral pH conditions were favorable to the degradation of PCE, compared to the alkaline condition (pH 10). Increasing Ni contents from 1 to 10% increased the PCE removal to 89.8% in 6 hr. However, the removal decreased to 74.2% at Ni content of 20%. Meanwhile, increasing Pd contents to 6% showed no difference in PCE removal at Pd content of more than 1%. Increasing H2 concentration increased the removal of PCE until 4% H2 which was maximumly applied in this study. Chlorinated products such as trichloroethylene, 1,1-dichloroethylene, cis-1,2-dichloroethylene, trans-1,2-dichloroethylene, and vinyl chloride were not observed while PCE was transformed to acetylene (24%), ethylene (5%), and ethane (11%) by Ni(10)-Pd(1)/H catalyst in 6hr.

• Journal of Soil and Groundwater Environment
• /
• v.19 no.6
• /
• pp.80-90
• /
• 2014

The laboratory and field studies were conducted to identify an optimal injection concentration of nanoscale zero-valent iron particles (NZVI) and to evaluate the applicability of NZVI-based reactive zone technology to the site contaminated with trichloroethylene (TCE) DNAPL (Dense Non-Aqueous Phase Liquid). The laboratory test found an optimal injection concentration of NZVI of 5 g/L that could remove more than 95% of 0.15 mM TCE within 20 days. Eleven test wells were installed at the aquifer that was mainly composed of alluvial and weathered soils at a strong oxic condition with dissolved oxygen concentration of 3.50 mg/L and oxidation-reduction potential of 301 mV. NZVI of total 30 kg were successfully injected using a centrifugal pump. After 60 days from the NZVI injection, 86.2% of the TCE initially present in the groundwater was removed and the mass of TCE removed was 405 g. Nonchlorinated products such as ethane and ethene were detected in the groundwater samples. Based on the increased chloride ion concentration at the site, the mass of TCE removed was estimated to be 1.52 kg. This implied the presence of DNAPL TCE which contributed to a higher estimate of TCE removal than that based on the TCE concentration change.