• 전기학회논문지
• /
• 제56권8호
• /
• pp.1436-1440
• /
• 2007

Beryllium copper has been known to be an important material for the various fields of industry because it can be used for mechanical and electrical/electronic components that are subjected to elevated temperatures (up to $400^{\circ}C$ for short times). Blade type tip for probing the cells of liquid crystal display(LCD) was fabricated using beryllium copper foil. The dry film resist was employed as a mask for patterning of the blade type tip. The beryllium copper foil was etched using hydrochloric acidic iron-chloride solution. The concentration, temperature, and composition ratio of hydrochloric acidic iron-chloride solution affect the etching characteristics of beryllium copper foil. Nickel with the thickness of $3{\mu}m$ was electroplated on the patterned copper beryllium foil for enhancing its hardness, followed by electroplating gold for increasing its electrical conductivity. Finally, the dry film resist on the bridge was removed and half of the nickel was etched to complete the blade type tip.

• Bulletin of the Korean Chemical Society
• /
• 제6권5호
• /
• pp.304-308
• /
• 1985

Morphological structure of tin oxide thin films was examined by transmission electron microscopy. TEM samples were prepared by chemical etching in hydrogen fluoride solution: firstly floating for 2-3 minutes in acid solution, then suspending on water found to be useful for the preparation of TEM samples. Electron micrographs showed the size of grains of the tin oxide crystal was dependent upon the temperature of the film preparation. Dopant concentration and heating time also influence the grain size. The resistivity of tin oxide material was explained by grain size and grain boundaries in a limited temperature and dopant concentration ranges.

• 자원리싸이클링
• /
• 제16권1호
• /
• pp.59-67
• /
• 2007

실리콘 웨이퍼 제조공정 중 발생되는 초산, 질산 및 불산을 함유한 3성분계 폐혼산으로부터 개별산으로 분리하여 재활용할 목적으로 용매추출법을 적용하였다. 각 산의 분리를 위해 사용한 추출제로는 초산의 경우는 EHA(2-Ethylhexlalcohol)를 사용하였고, 질산과 불산의 경우에는 TBP(Tri-butylphosphate)를 사용하여 각 산의 분리과정에 대한 공정설계를 위한 기초 data를 얻고자 하였다. 3성분계 폐혼산에서 초산을 추출 분리하고 이후 추출여액 중 질산 및 불산을 순차적으로 추출 분리 할 수 있는 연속공정개발을 위하여 기초 실험 자료와 McCabe-Thiele해석을 통해 최적 투입유량비(O/A), 소요단수(Stage) 등을 결정하였다. 분석 결과 혼산으로부터 초산의 회수율은 90%이상 이었으며 초산 추출여액에서 질산의 회수율은 90%, 최종 추출잔류액에서 불산의 회수율은 67%이상 이었다.

• 청정기술
• /
• 제23권3호
• /
• pp.279-285
• /
• 2017

본 연구에서는 염화철 에칭폐액 재생을 위하여 (주)케이엠씨에서 조합한 organophosphorus acid계의 신규용매(KMC-P)를 사용하였으며, 용매추출공정에서 신규 용매에 대한 추출효율을 증가시키기 위해 공정변수를 선정하고 변수간의 상관관계를 알아보기 위해서 DOE에 따른 최적화실험을 진행하였다. 용매 농도, pH, O/A ratio가 추출, 탈거효율에 영향을 미치는 인자로 나타났으며 최적의 탈거효율을 갖는 공정조건은 용매 농도 29.4 wt%, HCl 첨가량 0 mL, O/A ratio 7일 때, 최대 69.7%의 탈거효율을 기대할 수 있는 결과를 얻었으며 신뢰 수준은 86% 이상인 것을 확인하였다.

• 한국정밀공학회지
• /
• 제17권11호
• /
• pp.191-198
• /
• 2000

Laser direct patterning of the coated photoresist (PMER-NSG31B) layer was studied to make halftone dots on gravure printing roll. The selective laser hardening of photoresist by Ar-ion laser(wavelength: 333.6~363.8nm) was controlled by the A/O modulator. The coating thickness in the range of 5~11$\mu m$ could be obtained by using the up-down directional moving device along the vertically located roll. The width, thickness and hardness of the hardened lines formed under the laser power of 200~260㎽ and irradiation time of 4.4~6.6 $\mu$sec/point were investigated after developing. The hardened width increased as the coating thickness increased. Though the hardened thickness was changed due to the effect of the developing solution, the hardened layer showed good resistance to the scratching of 2H pencil. Also, the hardened minimum line widths of 10$\mu m$ could be obtained. The change of line width was also found after etching, and the minimum line widths of 6$\mu m$ could be obtained. The hardened lines showed the good resistance to the etching solution. Finally, the experimental data could be applied to make gravure halftone dots using the developed imaging process, successfully.

• 융합정보논문지
• /
• 제8권6호
• /
• pp.43-48
• /
• 2018

완전 수입에 의존하는 ITO를 대체할 수 있는 FTO 필름에 회로를 형성시킬 수 있는 식각액을 제조하였다. 이 식각액은 불화물 1 ~ 30량%, 산 1 ~ 20량%, 계면활성제 0.5 ~ 5 중량%, 용매제 5 ~ 20 량%, 부식억제제 0.5 ~ 10중량%, 나머지는 물로 이루어진다. 이 식각액은 드라이필름을 이용한 식각공정이 가능하여 비용을 절감할 수 있으며, 식각액의 거품발생 및 찌꺼기가 발생하지 않는 특징이 있다. 식각액의 특성은 100nm 두께의 FTO를 2분 만에 식각할 수 있었고 이때 $50^{\circ}C$의 식각액 온도를 유지하였다. 2분 식각액에 넣었을 때 -0.00364%의 언더컷을 얻었다. Cd, Pb, Hg, Cr 성분 등의 환경유해물질은 측정되지 않았다. 희토류가 나지 않는 우리나라에서 FTO를 활용하면 국산화 및 수입대체효과를 이룩할 수 있다.

• 한국재료학회지
• /
• 제21권2호
• /
• pp.89-94
• /
• 2011

In this work, fabrication and electrochemical analysis of an individual multi-walled carbon nanotube (MWNT) electrode are carried out to confirm the applicability of electrochemical sensing. The reactive ion etching (RIE) process is performed to obtain sensitive MWNT electrodes. In order to characterize the electrochemical properties, an individual MWNT is cut by RIE under oxygen atmosphere into two segments with a small gap: one segment is applied to the working electrode and the other is used as a counter electrode. Electrical contacts are provided by nanolithography to the two MWNT electrodes. Dopamine is specially selected as an analytical molecule for electrochemical detection using the MWNT electrode. Using a quasi-Ag/AgCl reference electrode, which was fabricated by us, the nanoelectrodes are subjected to cyclic voltammetry inside a $2{\mu}L$ droplet of dopamine solution. In the experiment, RIE power is found to be a more effective parameter to cut an individual MWNT and to generate "broken" open state, which shows good electrochemical performance, at the end of the MWNT segments. It is found that the pico-molar level concentration of analytical molecules can be determined by an MWNT electrode. We believe that the MWNT electrode fabricated and treated by RIE has the potential for use in high-sensitivity electrochemical measurement and that the proposed scheme can contribute to device miniaturization.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2012년도 춘계학술발표대회
• /
• pp.88.1-88.1
• /
• 2012

Silicon nanowires (SiNWs), due to their unusual quantum-confinement effects that lead to superior electrical and optical properties compared to those of the bulk silicon, have been widely researched as a potential building block in a variety of novel electronic devices. The conventional means for the synthesis of SiNWs has been the vapor-liquid-solid method using chemical vapor deposition; however, this method is time consuming, environmentally unfriendly, and do not support vertical growth. As an alternate, the electroless etching method has been proposed, which uses metal catalysts contained in aqueous hydrofluoric acids (HF) for vertically etching the bulk silicon substrate. This new method can support large-area growth in a short time, and vertically aligned SiNWs with high aspect ratio can be readily synthesized with excellent reproducibility. Nonetheless, there still are rooms for improvement such as the poor surface characteristics that lead to degradation in electrical performance, and non-uniformity of the diameter and shapes of the synthesized SiNWs. Here, we report a facile method of SiNWs synthesis having uniform sizes, diameters, and shapes, which may be other than just cylindrical shapes using a modified nanosphere lithography technique. The diameters of the polystyrene nanospheres can be adjustable through varying the time of O2 plasma treatment, which serve as a mask template for metal deposition on a silicon substrate. After the removal of the nanospheres, SiNWs having the exact same shape as the mask are synthesized using wet etching technique in a solution of HF, hydrogen peroxide, and deionized water. Different electrical and optical characteristics were obtained according to the shapes and sizes of the SiNWs, which implies that they can serve specific purposes according to their types.

• 폴리머
• /
• 제25권2호
• /
• pp.302-310
• /
• 2001

무전해도금법을 이용하여 구리/PET 필름 복합재료를 제조하였으며 에칭방법과 촉매액의 조성 및 acceleration 방법을 달리하여 PET 필름과 무전해도금된 구리 피막간의 접착력을 향상시키고자 하였다. HCl 용액으로 에칭된 PET 필름은 NaOH에 의한 것보다 더욱 세밀하게 에칭되어져 구리와 PET 필름간의 접착력은 향상되었으나 전자파 차폐효과는 유사한 경향을 보였다. 촉매액의 조성변화에 따른 영향을 살펴본 결과 PdCl$_2$:SnCl$_2$의 몰비가 1:4에서 1:16으로 증가할수록 PET 필름 위에 적층된 Pd/Sn 콜로이드 입자들의 크기가 감소하며 고르게 분포되는 경향을 보였다. 따라서 이들의 몰비가 증가할수록 구리도금이 균일하고 조밀하게 이루어져 접착력 및 차폐효과가 증가하였다. 또한 NaOH보다 HCl로 acceleration한 경우 촉매 입자의 크기가 작고 더 균일하게 분포되어 우수한 접착력과 도금물성을 나타내었다.

• 대한치과보철학회지
• /
• 제24권1호
• /
• pp.125-138
• /
• 1986

It is considered that etching solution or material itself of phosphoric ester cement will induce not a little pulpal irritation, if applied directly onto unsealed dentinal tubules. This study was designed to confirm above consideration by comparing two different conditions between $Ca(OH)_2$-based and non-$Ca(OH)_2$-based group. Posterior teeth of 15 male dogs were selected for this experiment. One experimental group was filled with cement after $Ca(OH)_2$-basing and enamel-etching, the other experimental group after enamel etching without $Ca(OH)_2$-basing. And both of two experimental groups were observed at 2 hours, 15 hours, 3 days, 1 week, 2 weeks, 4 weeks, and 6 weeks after filling. The findings reached to the following conclusions histologically. 1. In both groups, the damaged odontoblasts were atrophied and eventually disappeared. 2. In non-based group at early stage, odontoblasts were severely atrophied and defective areas were appeared between odontoblast cell layers. However, in based group, the odontoblasts were arranged slight irregularly. 3. In non-based group, a small number of undifferentiated cells below the odontoblast cell layers started to appear at 1 week after filling. However, in based group, the undifferentiated cells were appeared at 15 hours after filling. 4. In non-based group, formation of reparative dentin was not begun until late stage of experiment. However, in based group, formation of reparative dentin matrix was begun at 2 weeks after filling and very thickened reparative dentin was formed at 6 weeks after filling. 5. In odontoblast cell layers of both groups, dilated capillaries were observed. 6. Argyrophilic fibers were reticularly condensed in zone of Weil, and they were connected to the pulp tissue and dentin.