• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.08a
• /
• pp.262-266
• /
• 1998

In the speech recognition under the noisy environments, reducing the mismatch introduced between training and testing environments is an important issue, and spectral subtraction is widely used technique because of its simplicity and relatively good performance in noisy environments. In this paper, we introduced histogram method as a reliable noise estimationi approach for spectral subtraction. To deal with the problem of residual noise after spectral subtraction, we proposed a new ove-estimation technique based on distribution characteristics of histogram used for noise estimation. Since the proposed technique decides the degree of over-estimation adaptively according to the measured noise distribution, it can cope with the SNR variations effectively in compared with the conventional over-estimation technique.

• 한국데이터정보과학회:학술대회논문집
• /
• 2006.04a
• /
• pp.163-169
• /
• 2006

This paper deals with the comparison of parameter estimation methods in a 3-parameter Kappa distribution which is sometimes used in flood frequency analysis. The method of moment estimation(MME), L-moment estimation(L-ME), and maximum likelihood estimation(MLE) are applied to estimate three parameters. The performance of these methods are compared by Monte-carlo simulations. Especially for computing MME and L-ME, ike dimensional nonlinear equations are simplied to one dimensional equation which is calculated by the Newton-Raphson iteration under constraint. Based on the criterion of the mean squared error, the L-ME is recommended to use for small sample size $(n\leq100)$ while MLE is good for large sample size.

• International Journal of Aeronautical and Space Sciences
• /
• v.11 no.1
• /
• pp.31-40
• /
• 2010

For weapon cueing and Head-Mounted Display (HMD), it is essential to continuously estimate the motion of the helmet. The problem of estimating and predicting the position and orientation of the helmet is approached by fusing measurements from inertial sensors and stereo vision system. The sensor fusion approach in this paper is based on nonlinear filtering, especially expended Kalman filter(EKF). To reduce the computation time and improve the performance in vision processing, we separate the structure estimation and motion estimation. The structure estimation tracks the features which are the part of helmet model structure in the scene and the motion estimation filter estimates the position and orientation of the helmet. This algorithm is tested with using synthetic and real data. And the results show that the result of sensor fusion is successful.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.2
• /
• pp.429-435
• /
• 2010

Three dimensional (3-D) object detection and pose estimation from a single view query image has been an important issue in various fields such as medical applications, robot vision, and manufacturing automation. However, most of the existing methods are not appropriate in a real time environment since object detection and pose estimation requires extensive information and computation. In this paper, we present a fast 3-D object detection and pose estimation scheme based on surrounding camera view-changed images of objects. Our scheme has two parts. First, we detect images similar to the query image from the database based on the shape feature, and calculate candidate poses. Second, we perform accurate pose estimation for the candidate poses using the scale invariant feature transform (SIFT) method. We earned out extensive experiments on our prototype system and achieved excellent performance, and we report some of the results.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.3100-3102
• /
• 2000

In this paper, we propose to a robust frequency offset estimation method of OFDM signals. A carrier frequency offset may be decomposed into an integer multiple of the subcarrier spacing and a residual frequency offset. Fractional part of frequency offset is obtained by using the maximum likelihood estimation(MLE) method. And we use the correlation of the samples at the output of the discrete Fourier transform(DFT) to estimate integer part of frequency offset. The result shows that the estimation frequency offset is almost linear to frequency offset. We propose to an improved estimation error variance of the carrier frequency offset estimation. The proposed estimator has better performance than the conventional ones in terms of error variance and tracking range.

• Proceedings of the KIEE Conference
• /
• 2005.04a
• /
• pp.200-202
• /
• 2005

In this paper, improved rotor position estimation for position sensorless control system of the SRM (Switched Reluctance Motor) is presented. For more accurate rotor position estimation, the PLL (Phase Locked Loop) based position interpolation is adapted. In the current-flux-rotor position lookup table based rotor position estimation, the inherent current and flux-linkage ripple can cause the position estimation error. Instead of the conventional low-pass filter, the PLL based position interpolation technique is used for the better dynamic performance. The developed rotor position estimation scheme is realized using TMS320F2812 digital signal processor and prototype 1-hp SRM.

• Journal of the Semiconductor & Display Technology
• /
• v.12 no.3
• /
• pp.13-18
• /
• 2013

Motion estimation is a key technique of modern video processing that significantly improves the coding efficiency significantly by exploiting the temporal redundancy between successive frames. Thread-level parallelism is a promising method to accelerate the motion estimation process for multithreading general-purpose processors. In this paper, we propose a parallel motion estimation algorithm which parallelizes the motion search process of the current H.264/AVC encoder. The proposed algorithm is implemented using the OpenMP application programming interface (API) and can be easily integrated into the current encoder. The experimental results show that the proposed parallel algorithm can reduce the processing time of the motion estimation up to 65.08% without any penalty in the rate-distortion (RD) performance.

• Journal of Information Processing Systems
• /
• v.11 no.3
• /
• pp.342-353
• /
• 2015

It is widely accepted that single carrier frequency division multiple access (SC-FDMA) is an excellent candidate for broadband wireless systems. Channel estimation is one of the key challenges in SC-FDMA, since accurate channel estimation can significantly improve equalization at the receiver and, consequently, enhance the communication performances. In this paper, we study the application of compressive sensing for sparse channel estimation in a SC-FDMA system. By skillfully designing pilots, their patterns, and taking advantages of the sparsity of the channel impulse response, the proposed system realizes channel estimation at a low cost. Simulation results show that it can achieve significantly improved performance in a frequency selective fading sparse channel with fewer pilots.

• Journal of Auto-vehicle Safety Association
• /
• v.13 no.4
• /
• pp.123-128
• /
• 2021

This paper present box feature estimation from LiDAR point cluster using maximum likelihood Method. Previous LiDAR tracking method for autonomous driving shows high accuracy about velocity and heading of point cluster. However, Assuming the average position of a point cluster as the vehicle position has a lower accuracy than ground truth. Therefore, the box feature estimation algorithm to improve position accuracy of autonomous driving perception consists of two procedures. Firstly, proposed algorithm calculates vehicle candidate position based on relative position of point cluster. Secondly, to reflect the features of the point cluster in estimation, the likelihood of the particle scattered around the candidate position is used. The proposed estimation method has been implemented in robot operating system (ROS) environment, and investigated via simulation and actual vehicle test. The test result show that proposed cluster position estimation enhances perception and path planning performance in autonomous driving.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.17 no.4
• /
• pp.209-215
• /
• 2022

This paper proposes a novel approach for training an unsupervised depth estimation algorithm. The objective of unsupervised depth estimation is to estimate pixel-wise distances from camera without external supervision. While most previous works focus on model architectures, loss functions, and masking methods for considering dynamic objects, this paper focuses on the training framework to effectively use depth cue. The main loss function of unsupervised depth estimation algorithms is known as the photometric error. In this paper, we claim that direct depth cue is more effective than the photometric error. To obtain the direct depth cue, we adopt the technique of knowledge distillation which is a teacher-student learning framework. We train a teacher network based on a previous unsupervised method, and its depth predictions are utilized as pseudo labels. The pseudo labels are employed to train a student network. In experiments, our proposed algorithm shows a comparable performance with the state-of-the-art algorithm, and we demonstrate that our teacher-student framework is effective in the problem of unsupervised depth estimation.