• Journal of Oral Medicine and Pain
• /
• v.14 no.1
• /
• pp.43-55
• /
• 1989

The need of age estimation for identification was increased by complexity of society, and the tooth was used widely for age estimation because of less individual deviation than the other organ. The age estimation using the tooth had several methods. Recently, the one using the racemization of aminoacid in the tooth was admitted more accurate than the other methods, especially in old age. But, this study was not tried in our country, and I would report the result of experiment about age estimation using racemization of dentine. I selected 40-Whole dentine sample from extracted teeth, those were reserved in natural dried condition for 2 weeks~ 1year and calculated the estimation of age from the ratio of D-aminoacid and L-aminoacid (D/L ratio) using gaschromatography and the results were below. 1. The aminoacids showed apparent K/L ratio in dentine were aspartic acid, serine. 2. The aspartic acid showed the highest racemic rate and its rate was 0.0012$\pm$0.0003/yr. 3. The relation between the actual age and K/L ratio was very positive correlation(r+0.954) in the estimation of age using aspartic acid. 4. The deviation between the estimated age using D/L ratio of aspartic acid and actual age was $\pm$3.32.

• Survey Research
• /
• v.10 no.1
• /
• pp.141-154
• /
• 2009

With the current sampling scheme, the sampling variance is getting larger in producing smaller regional statistics than the designed area, The larger sample size can make the variance reduced but the efficiency of sample survey lower. The desired confidence level of sampling survey can be obtained using the current sample scheme with the same sample size and administrative data. In this paper, the number of the unemployed of 5 regions in Daejon are estimated using small area estimation methods and the CV values in each estimation method is calculated and compared for their estimation efficiency as empirical study. Jackknife method is proposed to estimate the MSE of synthetic estimator and composite estimator more accurately.

• Journal of Korea Multimedia Society
• /
• v.25 no.1
• /
• pp.39-51
• /
• 2022

Image-based gender classification and age estimation of human are classic problems in computer vision. Most of researches in this field focus just only one task of either gender classification or age estimation and most of the reported methods for each task focus on accuracy performance and are not computationally light. Thus, running both tasks together simultaneously on low cost mobile or embedded systems with limited cpu processing speed and memory capacity are practically prohibited. In this paper, we propose a novel light-weight gender classification and age estimation method based on ensemble multitasking deep learning with light-weight processing neural network architecture, which processes both gender classification and age estimation simultaneously and in real-time even for embedded systems. Through experiments over various well-known datasets, it is shown that the proposed method performs comparably to the state-of-the-art gender classification and/or age estimation methods with respect to accuracy and runs fast enough (average 14fps) on a Jestson Nano embedded board.

• The Korean Journal of Applied Statistics
• /
• v.20 no.2
• /
• pp.229-244
• /
• 2007

Among the small area estimation methods, it has been known that hierarchical Bayesian(HB) approach is the most reasonable and effective method. However any model based approaches need good explanatory variables and finding them is the key role in the model based approach. As the lacking of explanatory variables, adopting the spatial terms in the model was introduced. Here in this paper, we evaluate the model based methods with/without spatial terms using the diagnostic methods which were introduced by Brown et al. (2001). And Economic Active Population Survey(2005) is used for data analysis.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.6
• /
• pp.1078-1086
• /
• 2009

This paper presents a Fourier based algorithm for estimating the parameters of the low frequency oscillating modes. The proposed methods estimates various parameters(frequency, damping factor, mode magnitude, phase) by fitting Fourier spectrum and phase with a damped exponential cosine function. Dominant frequency is selected by taking frequency corresponding to the peak spectrum, and damping factor is estimated using the left/right spectra of Fourier spectrum. In addition, mode magnitude is calculated by the normalized peak spectrum, and phase is estimated from spectrum phase. Also, we introduce an accuracy index in order to determine the accuracy of the estimated parameters, and the index is calculated using the deviations of the peak spectrum and the left/right spectra. The parameter estimation methods proposed in this paper include very simple arithmetical processes, so the algorithms are simple and the calculation speed is very fast. The proposed methods are applied to test functions with two dominant modes. The results show that the proposed methods are highly applicable to low frequency parameter estimation.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.10
• /
• pp.98-103
• /
• 1997

Given the small bit allocation for motion information in very low bit-rate coding, motion estimation using the block matching algorithm(BMA) fails to maintain an acceptable level of prediction errors. The reson is that the motion model, or spatial transformation, assumed in block matching cannot approximate the motion in the real world precisely with a small number of parameters. In order to overcome the drawback of the conventional block matching algorithm, several triangle-based methods which utilize triangular patches insead of blocks have been proposed. To estimate the motions of image sequences, these methods usually have been based on the combination of optical flow equation, affine transform, and iteration. But the compuataional cost of these methods is expensive. This paper presents a fast motion estimation algorithm using a multiple linear regression model to solve the defects of the BMA and the triange-based methods. After describing the basic 2-D triangle-based method, the details of the proposed multiple linear regression model are presented along with the motion estimation results from one standard video sequence, representative of MPEG-4 class A data. The simulationresuls show that in the proposed method, the average PSNR is improved about 1.24 dB in comparison with the BMA method, and the computational cost is reduced about 25% in comparison with the 2-D triangle-based method.

• The Journal of Korean Physical Therapy
• /
• v.19 no.1
• /
• pp.23-31
• /
• 2007

Purpose: As a preliminary study, the purpose of this study was to examine the indirect estimation of the lumbar intervertebral disc size by two anthropometric methods, in order to compare these indirect methods with the direct analysis by radiological imaging. Methods: The wrist, elbow, knee, and ankle joint (both right and left) diameters were measured in 52 volunteers, and then intervertebral disc size was calculated using two anthropometric methods (Colombini and modified Colombini). The data were analysed with independent t-test to assess clinical usefulness. Results: When using right and left joint diameter, there was no significant difference in the estimation value of the L4-5 and L5-S1 intervetebral disc sizes. However, the study has shown that male subjects have significantly larger L4-5 and L5-S1 intervertebral disc sizes, compared with those of female subjects. In addition, disc sizes calculated by Colombini's formula were significantly larger than modified Colombini's formula. Conclusion: The indirect estimation of the intervertebral disc size by anthropometric method can be considered as a clinically useful method. However, further study should be conducted to compare anthropometric values with other radiological imaging.

• Korean Journal of Remote Sensing
• /
• v.27 no.3
• /
• pp.389-401
• /
• 2011

Most nations around the world have expressed significant concern in the climate change due to a rapid increase in green-house gases and thus reach an international agreement to control total amount of these gases for the mitigation of global warming. As the most important absorber of carbon dioxide, one of major green-house gases, forest resources should be more tightly managed with a means to measure their total amount, forest biomass, efficiently and accurately. Forest biomass has close relations with forest areas and tree height. Airborne LiDAR data helps extract biophysical properties on forest resources such as tree height more efficiently by providing detailed spatial information about the wide-range ground surface. Many researchers have thus developed various methods to estimate tree height using LiDAR data, which retain different performance and characteristics depending on forest environment and data characteristics. In this study, we attempted to investigate such various techniques to estimate tree height, elaborate their advantages and limitations, and suggest future research directions. We first examined the characteristics of LiDAR data applied to forest studies and then analyzed methods on filtering, a precedent procedure for tree height estimation. Regarding the methods for tree height estimation, we classified them into two categories: individual tree-based and regression-based method and described the representative methods under each category with a summary of their analysis results. Finally, we reviewed techniques regarding data fusion between LiDAR and other remote sensing data for future work.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.24 no.10
• /
• pp.802-808
• /
• 2014

The purpose of this study is to suggest efficient methods for estimating population exposed to noises by analyzing differences of population exposed to noises estimated by each method through comparing exposed population estimated by utilizing existing methods and those estimated by using census output areas reflecting the actual population information of each address. For population exposed to noises, the error of exposed population estimated by using the per capita living space turned out to be the biggest, and other estimation methods had no significant difference. For population exposed to excess noises, as a result of analyzing population estimated by each method based on census output areas, the error of the method using a grid noise map turned out to be the biggest. For the method to estimate population exposed to noises by using a noise map, the estimation methods using census output areas and total ground area are considered to be more rational than the grid noise map estimation method or the method to estimate the living space per capita.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.6
• /
• pp.429-437
• /
• 2019

This paper deals with a ZEM (Zero-Effort-Miss) based guidance law for the interception of moving targets and characteristics of the guidance law according to time-to-go estimation methods. To derive the ZEM vector feedback guidance command, we introduce a polynomial function with unknown coefficient, and then we determine the coefficient to satisfy initial and terminal constraints. Since the directions of the guidance command and ZEM vectors are adjusted by the time-to-go, general time-to-go estimation methods are proposed, which can generate the vertical and horizontal guidance commands with respect to an arbitrary reference frame. By performing various numerical simulations, the performance and characteristics of the proposed methods are investigated.