• Earthquakes and Structures
• /
• 제22권5호
• /
• pp.517-526
• /
• 2022

In this paper, nonlinear P-delta effects are studied on the seismic performance, and the modal responses of a flexural frame, considering large deformations. Using multiple scales method, the nonlinear differential equations of motion are estimated, and the nonlinear interactions between the frame's degrees of freedom are outcropped. The results of time and frequency domain analyzes of a dynamic model are examined under internal resonance cases, and the linear and nonlinear responses are investigated in each modal cases. Also, changing the modal responses with respect to the amplitude and frequency of the harmonic forces is evaluated. It is shown that the dominant absorption of energy is in the first natural frequency of the frame, in the case of earthquake excitation, and when a harmonic force is applied to the frame, the peaks of the frequency domain responses depending on the frequency of harmonic force are in the first, and second or third natural frequency of the structure.

• International Journal of Precision Engineering and Manufacturing
• /
• 제3권2호
• /
• pp.72-77
• /
• 2002

In this paper, a simple method to measure the residual stress in microstructure is presented. In order to find the residual stress in micro-machined beam, the first natural frequency of the beam that has the residual stress inside is analyzed using Rayleigh's energy method. Micro gold electroplated structure is fabricated by surface micro-machining process including electroplating. The made structure is an approximate shape of clamped-clamped beam and its 1 st natural frequency is measured by resonance method. For the better estimation of the residual stress, an equivalent length of micro-fabricated beam to ideal beam is calculated by FEM. The residual stress was estimated from the equivalent length and the measured natural frequency. It was found that a tensile stress was residue in the micro beam structure.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2000년도 봄 학술발표회논문집
• /
• pp.263-270
• /
• 2000

It is generally known that the stress and displacement of a member or a system under dynamic load with frequency ω are magnified by the factor 1/[1-(ω/ω/sub 0/)sup/ 2/]. When the member assumes non-prismatic shape, the natural frequency, ω/sub 0/ is hard or impossible to determine if the conventional method are adopted. In these cases, the numerical methods are provide powerful tools for the solution of frequency problems. In this paper, finite element method is applied to determine the natural frequencies of the non-symmetrically tapered members. The shape of the member is assumed to change sinusoidally along its axis. The results obtained by finite element method are expressed by some simple algebraic equations. The estimated frequencies calculated by the proposed equations coincide well with those by the finite element method.

• 한국정밀공학회지
• /
• 제17권12호
• /
• pp.195-200
• /
• 2000

In order to find a residual stress in the micro-machined beam, first natural frequency of the beam that has the residual stress inside is analyzed using the Rayleigh's energy method. Micro gold electroplated structure is fabricated by surface micro-machining process. The made structure is clamped-clamped beam and its 1st natural frequency is measured by resonance method. For the better estimation of the residual stress, an equivalent length of micro-machined beam to ideal beam is calculated by FEM. The residual stress is estimated from the equivalent length and the measured natural frequency.

• Journal of Welding and Joining
• /
• 제11권2호
• /
• pp.62-73
• /
• 1993

Weld pool oscillation for the full-penetration GTA welding process was investigated for its possible application to weld penetration control through theoretical modeling and experiment. Energy method was used to estimate the natural frequency of the molten pool having the physically-acceptable weld geometry and oscillation modes. An unique experimental system was built which had the data acquisiton and video capabilities so that the pool oscillation signals and molten pool surfaces could be monitored continuously. Pool oscillation was detected through arc voltage and arc light emission simultaneously. The signal from arc light emission showed good coherence with that from arc voltage, and arc light generated the higher quality signal. The molten pool was found to oscillate in different oscillation modes based on the travel speed and weld geometry. The natural frequency estimated from the theoretical model agreed reasonably well with the experimental results.

• 한국기계가공학회지
• /
• 제13권1호
• /
• pp.16-22
• /
• 2014

Resonance refers to the magnification of a structural response which occurs when a linear lightly damped system is driven with a sinusoidal input at its natural frequency. An exploratory vibration test (a natural frequency measurement test) is very important for the vibration testing of machine parts, as the value measured in an actual laboratory affects test results. For this reason, it is necessary to estimate the measurement uncertainty to verify the reliability of this type of test. In this study, measurement uncertainty is estimated based on three uncertainty factors. The uncertain factors are the measured points in the machine parts, the resolution of the vibration equipment, and uncertainty of the calibration certificate.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.389.1-389
• /
• 2002

An analytical study is presented on the hydroelastic vibration of two rectangular identical plates coupled with a bounded fluid by using the finite Fourier series expansion method. It is observed that the two contrastive modes, the so called the out-of-phase and in-phase modes. All natural frequency of the in-phase modes can be predicted well by the combination of the beam modes in the air, but the natural frequency of the out-of-phase mode cannot be estimated precisely. (omitted)

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 G
• /
• pp.2530-2532
• /
• 1998

Micro gold electroplating structure is fabricated by surface micromachining process. The made structure is clamped-clamped beam and its 1st natural frequency is measured by resonance method. In order to find residual stress, first natural frequency of beam which has tensile stress inside is analysed using Rayleigh's method. Elastic modulus and residual stress are estimated from the measured natural frequency.

• 대한토목학회논문집
• /
• 제38권1호
• /
• pp.175-182
• /
• 2018

본 연구에서는 설계 강우-유출 관계 분석법으로 산정된 값을 지역빈도해석 기법을 바탕으로 보정하여 미계측 유역에서의 확률홍수량을 산정하는 방법을 제안하였다. 홍수빈도해석법과 설계 강우-유출 관계 분석법을 비교 분석한 결과, 설계 강우-유출 관계 분석법으로 산정된 확률홍수량이 약 52% 과대 산정되는 것으로 나타났다. 또한, 미계측 유역의 확률홍수량을 산정하기 위해서 유역 특성인자를 자연유량으로 지표화 하여 지역빈도해석법을 수행하였다. 이와 같은 세 가지 방법의 설계홍수량 산정법을 기반으로 미계측 유역을 대상으로 적용할 수 있는 보정식을 도출하였다. 미계측 유역에 대한 적용성을 검토하기 위해 Leave-One-Out Cross-Validation 기법과 Skill Score 기법을 적용하였다. 그 결과, 정확도가 기존의 설계 강우-유출 관계 분석법보다 23.2% 증가한 것으로 나타났다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.763-766
• /
• 2004

Recently, various acoustic artifacts that contains speaker have been produced such as cellular phone. Speaker consists of diaphragm generating sound and coil vibrating diaphragm. Generally, good speaker means that it has a wide frequency range, high output power rate to input power and flat sound pressure level in specified frequency range. Acoustic characteristic was estimated through the experiment and computer simulation, or sound power was controlled with acoustic sensitivity in a natural frequency range fer last decade. However, the flatness of sound pressure level has not been considered to enhance the sound quality of a speaker. Tn this study, a method for speaker design is proposed for a good acoustic characteristic, which is flatness of SPL(sound pressure level) and wideness between the first and second natural frequency. SYSNOISE is used fer acoustic analysis and ANSYS is used for harmonic response analysis and modal analysis. Optimization for acoustic characteristics of a speaker diaphragm is performed using ModelCenter. All analyses are done within a frequency domain. And we confirm that the experimental and computational simulations have similar trend.