• Current Research on Agriculture and Life Sciences
• /
• v.5
• /
• pp.158-167
• /
• 1987

The purpose of this study is to inquire and analyse the relation between traveltime (Tc) and watetshed physical characteristics surveyed such as river length (L), Lea, river main slope (s), base length of time area diagram, and storage constant (k). The results obtained in this study are as follows. The average widths of watersheds were with the range from 4.6 kilometers to 16.7 kilometers. The shape factors of main stream ranged from 0.08 to 0.37. The average slopes to main 8tream were within the range of 1.7-5.5 meter per kilometer. The relation between the base length and traveltime from S. C. S. method, Rational method, and RZIHA+KRAVEN method were derived $Tc=0.524{\times}1.35^c$ (r=0.98), $Tc=0.628{\times}1.339^c$, (r=0.98), $Tc=0.667{\times}1.342^c$ (r=0.97). The base length of the time-area diagram (c) for the IUH was derived as $c=0.9(\frac{L.L_{ca}}{\sqrt{s}})^{0.35}$ and correlation coefficient was 0.98 which defined a high significance. The storage constant K, derived in this study was $K=8.32+0.0213{\frac{L}{\sqrt{s}}}$ with correlation coefficient (0.96). The relation between storage Constant and conventional formula were figured out $Tc=0.0003{\times}3.323^k$ (r=0.97). $Tc=0.00045{\times}3.268^k$ (r=0.99) and $Tc=0.0004{\times}3.26^k$ (r=0.963). The base length (c) and storage constant (k) of time-Area Diagram were very important parts that determined traveltime for flood events. In the estimate of travel time for predicting flood volume, the formula of $Tc=0.524{\times}1.35^c$ that would be available to apply the Nak - Dong river watershed area and homogeneous watershed characteristics was found.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.1
• /
• pp.1-14
• /
• 2014

The expansion of the physical road in response to changes in social conditions and policy of the country has reached the limit. In order to alleviate congestion on the existing road to reconsider the effectiveness of this method should be asking. Currently, how to collect traffic information for management of the intersection is limited to point detection systems. Intelligent Transport Systems (ITS) was the traffic information collection system of point detection method such as through video and loop detector in the past. However, intelligent transportation systems of the next generation(C-ITS) has evolved rapidly in real time interval detection system of collecting various systems between the pedestrian, road, and car. Therefore, this study is designed to evaluate the development of an algorithm for queue length based real-time traffic signal control methodology. Four coordinates estimate on time-space diagram using the travel time each individual vehicle collected via the interval detector. Using the coordinate value estimated during the cycle for estimating the velocity of the shock wave the queue is created. Using the queue length is estimated, and determine the signal timing the total queue length is minimized at intersection. Therefore, in this study, it was confirmed that the calculation of the signal timing of the intersection queue is minimized.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.952-959
• /
• 2022

Active construction work zones will result in longer travel time and/or longer travel distances for road users because of reduced speed limits and/or detours. This results in increased fuel consumption and increased emissions of harmful gases such as Carbon Monoxide (CO), Nitrogen Oxides (NOx), and Sulfur Oxides (SOx), which causes discomfort to the environment and road users around the work zone. The impact of such emissions should be considered while designing work zones or determining the number of days the roadway will be allowed to be closed partially or fully. This study develops a methodology to compute additional road user costs associated with such work zones. To achieve this goal, a) an extensive literature review is conducted, b) a framework to compute emission cost is developed, c) emission rates are computed for all counties (95) of the state of Tennessee, and d) a case study is conducted to demonstrate the use of the framework to estimate the additional impact of emission because of the work zone. For the case study conducted, the emission cost was computed to be $10,653.60 for the duration of the project. State DOTs can account for such road user costs while selecting contractors using A+B bidding. Accounting for such impact of emission will also indicate the agency's willingness to consider sustainability as a part of the business practices.

• Journal of Navigation and Port Research
• /
• v.30 no.10 s.116
• /
• pp.855-860
• /
• 2006

In the environment where multiple AGVs(Automated Guided Vehicles) operate concurrently in limited space, collisions, deadlocks, and livelocks which have negative effect on the productivity of AGVs occure more frequently. The accelerated motion of an AGV is also one of the factors that make the AGV routing more difficult because the accelerated motion makes it difficult to estimate the vehicle's exact travel time. In this study, we propose methods of avoiding collisions, deadlocks, and livelocks using OAR(Occupancy Area Reservation) table, and selecting best route by estimating the travel time of an AGV in accelerated motion. A set of time-driven simulation works validated the effectiveness of the proposed methods.

• Asia-Pacific Journal of Business
• /
• v.6 no.2
• /
• pp.81-95
• /
• 2015

This study is an investigative study into the effects that the 'travel motivations' of participants on walking tourism has on their 'degree of satisfaction' by identifying tourist motivations for selecting walking tour among many types of tourism and their effects on hikers' degree of satisfaction. This study was conducted with hikers affiliated with 'walking on beautiful roads '-one of Busan's preliminary social enterprises- with a total of 176 copies used for a final effective sample. Data collected was analyzed using SPSS WIN 18.0 to conduct a frequency analysis of the sample. Along with exploratory factor analysis, Cronbach's ${\alpha}$ coefficient was used as an estimate of the validity and reliability of each factor. Multiple regression analysis was done for an analysis of travel motivations and their effects on satisfaction. The scale rates items in the questionnaire in the following categories: 'Motivations' for walking tours consist of 5 factors- vacation, soul-searching, social get-togethers, nature tour, community experience-with a total of 20 items. 'The degree of satisfaction' is made up of a factor with a total of 4 items. The results of the study are as follows: with respect to the hypothesis that motivations for walking tour would have a positive effect on the degree of satisfaction, test results show that 'motivations' have significant partial effects on the 'degree of satisfaction'. Motivations affect the degree of satisfaction in the order of nature tour and soul-searching except for experience and social get-togethers- an indication that participants on walking tours tend to travel for the attractiveness of nature, wanting time for reflection and meditation. As the first investigative study into participants in walking tours products offered by travel agencies, the study has the following implications for marketers: First, travel agencies selling walking tour products and government institutions concerned about the development of hiking trails need to discuss ways to make the most of natural resources as they are- rather than using development-oriented approaches. The study has its own limitation: it is that with the lack of domestic and international studies on walking tours, the study has not gained access to precedent studies on the subject so it has not established a systemic approach to the emerging type of tourism. Hopefully, this study will make a small contribution to its development.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.1
• /
• pp.1-13
• /
• 2019

With commercial apps popular in EU, MaaS has been emerging around the globe as a new approach to worsening urban traffic problems. In contrast, it is still mainstay in Korea simply discussing the concept and necessities of MaaS, rather than seeking for real-world solutions for the commercialization. The purpose of this research is to analyze the demand-side i1mpacts of travel time and cost changes according to MaaS adoption, and to see its commercial feasibility in Korea. The 2010 KTDB traveler's nationwide OD data is used to estimate the level of fare discount for balancing the mode shift and fare revenue changes followed by MaaS implementation. The analysis results show that MaaS leads to the increase of public transport ridership as a result of the diminishing travel cost and time, and that the time saving works more positively for ridership increase. Also, the optimum level of fare discount is estimated 2.56% without damaging the revenue. This finding reveals that MaaS impact is superior to the other single-sided public transport inventive measures since it can affect both travel cost and time reduction at the same time.

• Journal of Korean Society of Transportation
• /
• v.27 no.5
• /
• pp.163-168
• /
• 2009

Travel time reduction is a benefit in economic analysis. Freight transportation time reduction benefits influence the logistics industry. The objectives of this paper are to estimate the Value of Time (VOT) for transportation time reduction with logit methodology. The data of Gyeonggi-do's domestic road freight transport in 2007 are used. VOT was estimated for five commodities. An average VOT of 19,946 won/vehicle-hr was calculated; transport of electronic parts had the highest VOT. This study will help provide direction for improving Korea's road infrastructure for freight.

• Journal of the Korean Society for Railway
• /
• v.9 no.2 s.33
• /
• pp.187-192
• /
• 2006

The regularity of railway track alignment is a crucial component fur maintaining travel safety and the smoothness of passenger ride. The conventional spectral analysis has been considered to estimate the severity of the track irregularity from measured data. The time domain data used to be changed into the frequency domain by Fourier transform. Because the measuring points can be regarded as the time points, the spatial-frequency can be introduced instead of the time-frequency. Although FFT(Fast Fourier Transform) and/or PSD(Power Spectral Density) function could provide fairly localized information within frequency domain, but chronical configurations of data could be missed. In this study, we attempt to apply the Morlet wavelet transform for the purpose of a frequency-time-domain analysis rather than a frequency-domain analysis. The applicability of wavelet transform is examined for the estimation of the track irregularity with real measured track data on the section of Kyoung-bu line by EM-120 measuring vehicle. It is shown that the wavelet transform can be an effective tool to manage the track irregularity.

• Journal of Korean Society of Transportation
• /
• v.18 no.4
• /
• pp.19-30
• /
• 2000

The purpose of the Paper is to estimate values of transfer related variables on route choices of subway users in Seoul. Four attributes were estimated affecting route choices, i.e. in-vehicle time, transfer time, number of transfers and existence of escalators. Stated preference and revealed preference techniques were used to estimate these values. The values of transfer related variables can be shown by in-vehicle time equivalents. One minute of transfer is 1.5∼2 times one minute of in vehicle times one time of transfer is 10∼15 times, and the existence of escalator is 2∼8 times. Women generally show stronger impedance than men and the elder does than the younger. Working, commuting and educational trips show stronger impedance than others too.

• International Journal of Highway Engineering
• /
• v.19 no.2
• /
• pp.143-152
• /
• 2017

PURPOSES : This study intends to estimate the tangible benefits derived from the integration of operations of an Express Intercity Bus Terminal and a Highway Service Area. METHODS: For the study, a highway service area was chosen to function as a bus terminal, integrating its services with that of a nearby bus terminal plagued by operating losses. The exercise also helped improve mobility owing to the introduction of local buses between the terminals and utilization of the existing infrastructure such as rest areas. Thus, a terminal that was not being utilized for its intended functionality was integrated with an existing facility to improve the utilization of both and subsequently aid local development. The impact of the exercise was then measured by evaluating the variation in utilization efficiency, operating costs, travel time between two regions (Seoul-Jeomchon and Seoul-Geumsan), and the social costs before and after the integration of the two facilities. RESULTS :The impact of the integration was an increase in utilization efficiency, a decrease in operating cost, a decrease in travel time, and a decrease in social cost in both the regions. The benefits of improved utilization and cost saving can be passed on to the citizens in the form of discounts. A local power generation facility will eventually replace the bus terminal, which can revitalize the local economy. CONCLUSIONS :The integration of the highway service area with the bus terminal is expected to have a win-win effect on the passengers as well as the operators. The study also proposes a sustainable strategic plan for existing terminals and rest areas to implement a method to compete with KTX transportation.