• 제목/요약/키워드: esthetic analysis

검색결과 310건 처리시간 0.025초

적층각도가 다른 단방향 CFRP와 SM45C샌드위치형 복합재료에 관한 융합적 연구 (Convergence Study on Composite Material of Unidirectional CFRP and SM 45C Sandwich Type that Differs in Stacking Angle)

  • 박재웅;조재웅
    • 한국융합학회논문지
    • /
    • 제8권7호
    • /
    • pp.231-236
    • /
    • 2017
  • 본 연구에서는 고분자재료인 CFRP(Carbon Fiber Reinforced Plastic)과 구조용 금속인 SM45C로 이루어진 이종 복합재료가 경량화 재료용으로 사용되고 있다. SM45C를 심재로 갖고 양면에 섬유 적층각도가 다른 단반향 CFRP를 접착시킨 샌드위치형 복합재료를 이용하여 CT(Compact Tension)시험을 기초로 한 유한요소 해석을 진행하였다. CT시험은 하중을 받는 재료내의 크랙으로 인한 파괴거동을 확인하기 위한 대표적인 방법이다. 이종 복합재료를 기계 구조물에 적용하기 위해서는 크랙 및 구멍에 대한 영향을 연구하여야 한다. 샌드위치형 복합재료의 CT시험에 의한 파괴거동을 시뮬레이션 해석으로 연구하였다. 본 연구 결과로서, [0/60/-60/0]의 적층각도를 가진 단방향 CFRP 샌드위치형태 복합재료가 우수한 강도를 갖으며 최대 등가응력은 약 182GPa정도가 나타났다. 또한 복합 재료 형상으로서의 디자인적 요소를 융합 기술에 접목함으로서 그 미적인 감각을 나타낼 수 있다.

내부연결방식 임플랜트 시스템의 삼차원 유한요소법적 연구 (THREE DIMENSIONAL FINITE ELEMENT ANALYSIS OF INTERNALLY CONNECTED IMPLANT SYSTEMS)

  • 김유리;조혜원;이재봉
    • 대한치과보철학회지
    • /
    • 제44권1호
    • /
    • pp.85-102
    • /
    • 2006
  • Statement of problem: Currently, there are some 20 different geometric variations in implant/abutment interface available. The geometry is important because it is one of the primary determinants of joint strength, joint stability, locational and rotational stability. Purpose: As the effects of the various implant-abutment connections and the prosthesis height variation on stress distribution are not yet examined this study is to focus on the different types of implant-abutment connection and the prosthesis height using three dimensional finite element analysis. Material and method. The models were constructed with ITI, 3i TG, Bicon, Frialit-2 fixtures and solid abutment, TG post, Bicon post, EstheticBase abutment respectively. And the super structures were constructed as mandibular second premolar shapes with 8.5 mm, 11 mm, 13.5 mm of crown height. In each model, 244 N of vertical load and 244 N of $30^{\circ}$ oblique load were placed on the central pit of an occlusal surface. von Mises stresses were recorded and compared in the crowns, abutments, fixtures. Results: 1. Under the oblique loading, von Mises stresses were larger in the crown, abutment, fixture compared to the vertical loading condition. 2. The stresses were increased proportionally to the crown height under oblique loading but showed little differences with three different crown heights under vertical loading. 3. In the crown, the highest stress areas were loading points under vertical loading, and the finish lines under oblique loading. 4. Under the oblique loading, the higher stresses were located in the fixture/abutment interface of the Bicon and Frialit-2 systems compared to the ITI and TG systems. Conclusions: The stress distribution patterns of each implant-abutment system had difference among them and adequate crown height/implant ratio was important to reduce the stresses around the implants.

CAD/CAM 세라믹 인레이로 수복한 치아의 응력분포에 관한 유한요소법적 연구 (FINITE ELEMENT STRESS ANALYSIS OF A TOOTH RESTORED WITH CAD/CAM CERAMIC INLAY)

  • 송보경;엄정문
    • Restorative Dentistry and Endodontics
    • /
    • 제26권6호
    • /
    • pp.464-484
    • /
    • 2001
  • When restoring a tooth, the dentist tries to choose the ideal material for existing situation. One criterion that is considered is its suitability for restoring coronal strength. As more tooth structure is removed, the cusps are weakened and susceptible to fracture. Further, this increased deformation may cause the formation of intermittent gaps at the margin between the hard tissue and the restoration, facilitating marginal leakage. The improvements in ceramic materials now make it possible for alternatives to amalgams, composites, and cast metal to be of offered for posterior teeth. Of the materials used, ceramics most closely approximates the properties of enamel. The introduction of computer-aided design/computer-aided manufacture(CAD/CAM) systems to restorative dentistry represents a major technological breakthrough. It is possible to design and fabricate ceramic restorations at a single appointment. Additionally, CAD/CAM systems eliminate certain errors and inaccuracies that are inherent to the indirect method and provide an esthetic restoration. The aim of this investigation was to study the loading characteristics of CAD/CAM ceramic inlay and to compare the stress distribution and displacement associated with different designs of cavity(the isthmus width and cavity depth). A human maxillary left first premolar was prepared with standard mesio-occlusal cavity preparation, as recommended by the manufacturer Ceramic inlay was fabricated with CEREC 2 CAD/CIM equipment and cemented into the prepared cavity. Three dimensional model was made by the serial photographic method. The cavity width was varied $\frac{1}{3}$, $\frac{1}{2}$ and $\frac{2}{3}$ of intercuspal distance between buccal and lingual cusp tip. The cavity depth was varied 1.5mm and 2.3mm. So six models were constructed to simulate six conditions. A point load of 500N was applied vertically onto the first node of the lingual slope from the buccal cusp tip. The stress distribution and displacement were solved using ANSYS finite element program(Swanson Analysis System). (omitted)

  • PDF

자동차의 A필러에 대한 강도 및 내구성 해석을 통한 융합 연구 (A Convergence Study through Analysis of Strength and Durability on Automotive A-Pillar)

  • 오범석;조재웅
    • 한국융합학회논문지
    • /
    • 제10권11호
    • /
    • pp.297-302
    • /
    • 2019
  • A필러는 주행 중 차량 전복시로 인하여 발생할 수 있는 충격을 완화시켜 탑승자의 신체 보호를 목적으로 안전성에 밀접한 관계가 있다. 그러므로 A필러는 다양한 동적 하중으로부터 이들 부품을 보호해야 한다. 이 제품을 만들기 전에 두 종류의 부품들을 설계하고 차량경량화를 위하여 두께가 조절된 제품을 분석함으로서 본 연구결과는 A필러의 강도 및 내구성에 기여할 수 있다고 사료된다. 본 연구결과를 자동차의 A 필러의 부품에 실제적으로 응용한다면 설계의 내구성 검증에 의하여 그 파손을 방지할 수 있다고 사료된다. 본 연구에서의 자동차의 A필러의 강도 및 내구성 해석에 관한 해석 및 설계 데이터를 이용함으로서 실제적인 자동차에서의 부품에 융합하여 그 미적 감각을 줄 수 있다.

자동차 내부에서의 라디에이터 위치에 따른 유동해석에 관한 융합 연구 (A Convergence Study on Flow Analysis According to the Position of Radiator Inside Car)

  • 오범석;조재웅
    • 한국융합학회논문지
    • /
    • 제10권11호
    • /
    • pp.321-326
    • /
    • 2019
  • 대중교통의 이용량이 증가해 감에 따라 그 중 자동차의 연비를 올리기 위하여 많은 연구들이 수행되고 있다. 본 연구의 목표는 자동차의 3가지 모델을 통해 자동차의 연비를 높일 수 있기 위하여 전방 차체를 설계하고자 하는 것이다. 모든 모델들은 CATIA 프로그램으로 설계되었고 ANSYS 프로그램으로 자동차의 외부 공기에 대한 유동해석을 모델별로 수행하였다. 시속 90km/h의 운행 속도에서는 차체가 길쭉할수록 공기의 저항을 덜 받아 연비를 높일 수 있는 효과가 있다고 사료된다. 본 연구를 통하여 기차의 효율성을 극대화할 수 있는 자동차의 전방 차체를 설계하는데 도움이 될 수 있다. 본 연구에서의 자동차 내부에 있는 라디에이터 위치에 따른 유동 해석에 관한 설계 데이터를 이용함으로서 실제적인 자동차에서의 부품에 융합하여 그 미적 감각을 줄 수 있다.

물탱크의 형상에 따른 유동 특성에 관한 융합 연구 (Convergence Study on Flow Characteristic due to the Configuration of Water Tank)

  • 오범석;조재웅
    • 한국융합학회논문지
    • /
    • 제10권6호
    • /
    • pp.185-190
    • /
    • 2019
  • 본 연구에서는 다양한 물탱크의 형상에 따른 입출구의 유동 조건들에 따른 물탱크 내부에서 발생하는 유동특성을 전산 유체 역학 프로그램인 ANSYS CFX를 이용하여 분석하였다. 또한 다양한 물탱크의 형상에 따른 입, 출구의 유동 조건들에 변화를 주어 어떤 모델이 가장 효율적인지를 알아보았다. 모델 A, B, C에 같은 재질을 적용하였다. 유동해석 결과로서는 모델 B가 가장 좋은 유동의 속도를 보이고, 모델 C는 유동에 가해지는 압력이 가장 높은 것으로 나타났다. 이로써 물탱크가 제품의 형상에 따라 같은 재질을 가지더라도 그 유동 속도와 압력은 달라졌다. 따라서 본 유동해석 결과를 통하여 제품의 형상에 따라 유동의 흐름에 좋은 탱크를 개발 할 수 있다고 사료된다. 본 연구 결과를 토대로 유체 탱크의 형상에 따른 유동의 해석 데이터를 실생활에 융합하여 그 미적 감각을 나타낼 수 있다.

자동차 사이드미러의 유동 해석을 통한 융합연구 (A Convergence Study through Flow Analysis of Automotive Side Mirror)

  • 오범석;조재웅
    • 한국융합학회논문지
    • /
    • 제10권9호
    • /
    • pp.161-166
    • /
    • 2019
  • 본 연구에서는 A, B, C 3가지 자동차 사이드미러 모델들에 있어서의 공기 저항으로 인한 유동을 분석을 함으로서 다양한 사이드미러들 주위에서의 흐름을 연구한다. 모델 A는 사각형 모양의 사이드미러이고, 모델 B는 삼각형 모양의 사이드미러, 모델 C은 타원형 모양의 사이드미러이다. 자동차의 사이드미러의 설계를 변경함으로서 운전 시 좀 더 사이드미러의 공기저항을 줄여서 약간의 자동차의 동력을 감소시킬 수 있다. 해석 결과로서, 사이드미러에 대한 공기저항의 압력이 클수록 공기 유동속도가 큰 것을 볼 수 있었다. 그러므로 공기저항의 압력이 작을수록 유동속도가 작고 공기가 더 잘 유통된다고 판단된다. 그러므로 Model B가 가장 좋은 Model이라는 것을 확인할 수 있다. 본 연구결과를 토대로 얻은 자동차 사이드 미러의 설계데이터를 활용함으로서 실생활에서의 자동차 운전시에 그 미적 감각을 나타낼 수 있다.

오프로드용 SUV의 프론트 언더커버 형상에 따른 내구성에 대한 융합 연구 (Convergence Study on Durability due to the Configuration of Front Under Cover of Off-road SUV)

  • 최계광;조재웅
    • 한국융합학회논문지
    • /
    • 제10권7호
    • /
    • pp.149-154
    • /
    • 2019
  • 본 논문은 오프로드용 SUV 자동차의 프론트 언더커버에 대한 구조해석을 통하여 내구성을 연구하고자 한다. 실제 사용되는 차체 하부 보호용 언더커버의 형상과 비슷한 3종류의 모델들을 해석하여 어떤 모델이 구조적으로 가장 좋은 것인지 고찰하였다. 언더커버의 모델들은 CATIA 프로그램을 통하여 Model A, B, C 3종류로 설계하였고 ANSYS 프로그램을 이용하여 해석을 하였다. 해석 결과들을 통하여 세 모델들 중에서 Model B가 최대 등가 응력이 가장 작고 피로 수명도 길어서 내구성이 가장 좋은 것으로 나타났다. 본 연구결과를 토대로 얻은 언더커버의 내구성 있는 설계데이터를 활용함으로서 실생활에서의 기계나 구조물에 융합하여 그 미적 감각을 나타낼 수 있다.

루프 박스의 형상별 차량 주위에서의 유동에 관한 융합 연구 (A Convergence Study on the Flow near Vehicle by the Configuration of Roof Box)

  • 오범석;조재웅
    • 한국융합학회논문지
    • /
    • 제10권10호
    • /
    • pp.99-105
    • /
    • 2019
  • 본 연구에서는 차량의 루프에 장착되는 다양한 종류들의 루프 박스 모델들에 대한 자동차 주위에서의 유동해석을 하였다. 유체의 흐름 및 압력 해석을 통하여 어떠한 모델이 운행에 있어서 더 적합한지에 대하여 고찰하였다. 4종류의 모델은 각자의 모양을 가진 모델 1, ${\beta}$, ${\gamma}$${\delta}$로 설정하여 설계를 하였고 주행 속도는 20m/s로 설정하였다. 모델 ${\beta}$의 경우는 압력이 다른 모델에 비해 가장 크게 나오고, 모델 ${\delta}$는 유선형의 구조인 카누를 장착하여 루프 박스들 중에는 가장 낮은 압력을 가진다는 것을 확인하였다. 본 연구결과를 토대로 얻은 루프박스의 내구성 있는 설계데이터를 활용함으로서 실생활에서의 차체에 융합하여 그 미적 감각을 나타낼 수 있다.

한국.중국.일본 여성의 색조대장문화 (A Study on Make-up Culture of Korea, China and Japan)

  • 박보영;황춘섭
    • 복식
    • /
    • 제39권
    • /
    • pp.217-237
    • /
    • 1998
  • The present research is to study the make-up culture of Korea and its neighboring countries such as China and Japan during the period from the prehistoric age to the 19th cen-tury. The research was made by documents analysis. The results are summerised as follows : (1) A man has a basic instinct to beautify himself. There was not a significant difference between the make-up behavior of men and women in its primal stage. It was by the start of farming and the division of labor that made the make-up behavior as a feminine culture. The difference of sexual role caused the con-ceptual difference between manly beauty and womanly beauty. It was very natural for women to regard the make-up as the best way for showing their feminine beauty. In Korea, China and Japan, there were vari-ous kinds of primal actions such as tattooing, body-painting, and tooth make-up which were used in the purpose of body protection, incantation, ornament, and so on. Ass their ornamental purpose was becoming more important, these primal actions became the basis of the feminine make-up culture. Nowadays make-up, having mental and emo-tional function, is helpful to increasing self-satisfaction, promoting good personal relation-ship, and attracting attention from the other sex. It also has other functions of showing social status, wealth, age, sex, courage, power, and so on. (2) The representative make-up product used widely in the three countries was Boon (powder) which decides the overall color of face. The key point in the production of Boon was to increase its power of adsorption. The invention of Yunboon (power mixed with lead) solved this major problem of Boon. Yeonji which decides the color of cheek was the mixture of Boon and the powder of Honghwa (a kind of red-colored flower or tree). Mimook (eyebrow pencil) was developed to match up with the various and changing currencies of penciling eyebrows in each nation and times, Yeonji and Joosa (red sand) were used as Jinji (lip stick). The predominant color of Jinji was red. As miscellaneous methods of partial make-up, there were Kon-ji used in a wedding cer-emony in korea, Aek-hwang, Hwa-jeon, Sa-hong, and Myun-yup in China, and Chi-heuk, a peculial method of partial make-up in japan. (3) There were various factors which decided the characteristics of make-up culture usually reflects international atmosphere, the form of government, economic situation, re-ligious and social ideology, aesthetic sense, symbolizing meanings of colors, and so on. The up and down of an influentian country was one of the major factors which decided the characteristics of the make-up culture of its neighboring countries. When a country took a liberal form of government, it had diverse and splendid tendencies in its make-up culture. The better a nation's economic situation is, the more abandant and various its make-up culture is, and sometimes, the more eccentric and decadents it was. In the field of make-up production, the three countries had their own characteristics. But, as a whole, China was the leading nation who spread the culture and products of make-up to Korea and Japan. Though the Chinese make-up culture and products were usually spread to Japan through Korean, there was some evidence of direct exchanges between China and Japan through its dispatches of Kyun-Tang-Sa(Japanese delegation to the Tang Dynasty). While religion had a positive influence on the development of make-up culture by introducing new methods of make-up, Confucianism exercised strict control over the make-up cul-ture. The currencies in arts and changes of esthetic sense introduced new methods and booms to the make-up culture. Literature made people pay increasing attentions to the countenances of women and changed the standards of esthetic sense. We can find out that the social status of woman was also reflected in the make-up culture. As the social status of women became higher, the feminine make-up culture also developed more then ever. As mentioned above, the make-up cultures of the three countries reflected their social values, esthetic senses, and emotional feelings. Through their cultural exchanges, the three countries could develop various make-up products and methods.

  • PDF