Browse > Article
http://dx.doi.org/10.15207/JKCS.2019.10.7.149

Convergence Study on Durability due to the Configuration of Front Under Cover of Off-road SUV  

Choi, Gye-Gwang (Department of Metal Mold Design Engineering, Kongju national University)
Cho, Jae-Ung (Division of Mechanical & Automotive Engineering, Kongju National University)
Publication Information
Journal of the Korea Convergence Society / v.10, no.7, 2019 , pp. 149-154 More about this Journal
Abstract
This paper is to study the durability through structural analysis on the front undercover of SUV car for offroad. It was investigated which model became structurally best by analyzing three kinds of models which are similar to the configuration of undercover for the protection of the part under car body which has been used really. The models of undercover were designed through CATIA program and analyzed by using ANSYS program as three kinds of models A, B and C. Through the analysis results, model B was expressed to have the best durability as model B has the least equivalent stress and the longest fatigue life among three models. As the design data with the durability of undercover obtained on the basis of this study result are utilized, the esthetic sense can be shown by being grafted onto the machine or structure at real life.
Keywords
Structural analysis; Undercover; Durability; Convergence; Equivalent stress; Deformation; Fatigue;
Citations & Related Records
Times Cited By KSCI : 16  (Citation Analysis)
연도 인용수 순위
1 G. G. Choi & J. U. Cho. (2018). A Convergence Study through Durability Analysis due to the Configuration of Automotive Frame Butted. Journal of the Korea Convergence Society, 9(11), 271-276.   DOI
2 J. W. Park & J. U. Cho. (2017). Convergence Study on Composite Material of Unidirectional CFRP and SM 45C Sandwich Type that Differs in Stacking Angle. Journal of the Korea Convergence Society, 8(7), 231-236.   DOI
3 J. U. Cho.(2014). Analytical Study on Durability due to the Load of Artificial Knee Joint, Journal of the Korea Convergence Society 5(2), 7-11.   DOI
4 Y. K. Park & B. G. Lee. (2018). A Study on the Structural Analysis of the Spindle of Swiss Turn Type Lathe for Ultra Precision Convergence Machining. Journal of the Korea Convergence Society, 9(5), 145-150.   DOI
5 J. H. Lee & J. U. Cho. (2015). Study on the Convergent Life Evaluation due to the Bumper Configuration of Multipurpose Vehicle. Journal of the Korea Convergence Society, 6(5), 85-90.   DOI
6 Z. H. Wang., C. K. Chun & Y. C. Kwon. (2018). Study on Exhaust Air Heat Transfer Characteristics of Heat Exchange System for White Smoke Reduction. Journal of Korean Society of Mechanical Technology, 20(6), 739-744.   DOI
7 Y. S. Choi & Y. C. Kwon. (2019). An Experimental Study of Air-side Heat Transfer and Pressure Drop of Evaporator for Refrigerator Unit. Journal of Korean Society of Mechanical Technology, 21(1), 42-47.   DOI
8 S. W. Hwang. (2019). A Comparison Study of Performance due to the Oil-cooler Fin Shape for Diesel Engine using Numerical Analysis. Journal of Korean Society of Mechanical Technology, 21(1), 1-7.   DOI
9 B. M. Jang & D. H. Cho. (2019). A Study on the Flow Characteristics around Vertical Wall with Flap. Journal of Korean Society of Mechanical Technology, 21(2). 248-253.   DOI
10 H. J. Kang & H. S. Lee. (2019). A Study on Heating and Cooling Performance Characteristics of Heat Meter for Water Source Heat Pump System. Journal of Korean Society of Mechanical Technology, 21(2), 321-326.   DOI
11 J. S. Lee. (2018). Structural Analysis of a 24 Person Elevator Emergency Brake. Journal of the Korea Convergence Society, 9(12), 189-194.   DOI
12 J. W. Park & J. U. Cho. (2017). Convergence Study on Composite Material of Unidirectional CFRP and SM 45C Sandwich Type that Differs in Stacking Angle, Journal of the Korea Convergence Society, 8(7), 231-236.   DOI
13 J. I. Lee. (2017). The Convergence Design for Stiffness and Structure Advancement of Automotive Body. Journal of the Korea Convergence Society, 8(4), 189-197.   DOI
14 J. U. Cho. (2015). Study on Convergence Technique through Strength Analysis of Stabilizer Link by Type. Journal of the Korea Convergence Society, 6(1), 57-63.   DOI
15 M. K, Park & B. G. Lee. (2018). A Study on the Structural Analysis of the Spindle of Swiss Turn Type Lathe for Ultra Precision Convergence Machining. Journal of the Korea Convergence Society, 9(5), 145-150.   DOI
16 J. H. Lee & J. U. Cho. (2015). Study on Convergence Technique through Structural Analysis due to the Configuration of Guitar. Journal of the Korea Convergence Society, 6(4), 9-14.   DOI
17 S. Y. Oh. (2012). A Traffic Hazard Prediction Algorithm for Vehicle Safety Communications on a highway. Journal of Digital Convergence, 10(9), 319-324.   DOI
18 K. H. Ko. (2018). An Estimating Algorithm of Vehicle Collision Speed Through Images of Blackbox. Journal of Digital Convergence, 16(9), 173-178.   DOI
19 J. H. Ku. (2017). A Study on the Platform for Big Data Analysis of Manufacturing Process. Journal of Convergence for Information Technology, 7(5), 177-182.   DOI
20 J. H. Hyeon, Y. H. Moon & S. W. Ha. (2018). Development of Automation Software for Corner Radius Analysis of Composite Laminated Structure. Journal of Convergence for Information Technology, 8(3), 107-114.   DOI
21 G. W. Hwan & J. U. Cho. (2017). Analysis Study on the Damage of Crack Happening with the Bending at CFRP Plate due to Stacking Angle. Journal of the Korea Convergence Society, 8(3), 185-190.   DOI