• Journal of Animal Environmental Science
• /
• v.14 no.2
• /
• pp.105-112
• /
• 2008

This study was carried out to investigate evaporation rate of moisture per surface area and degradation rate of organic matter in full scale escalator reversing composting facility were analyzed to develope a computer program for the computation of an optimum volume of composting facility according to handling methods of swine farm, moisture levels of manure, degradation rate of organics and evaporation rate of moisture during composting. The obtained results can be followed as bellow; The temperature in full scale escalator reversing composting facility during composting reached $70^{\circ}C$ in 4 days and maintained until 11 days. Reduction rate of moisture and density was average 1.20% and 29.7%, respectively. Annual degradation rate of organic matter was 3.53%, showing lowest rate in winter as 3.23%. These seasonal degradation rate could be a factor to be considered for proper management and installation of composting facility. When computed with the amount of feces, urine, slurry and manure plus wastewater produced, the optimum volumes of composting facility for slurry and manure plus wastewater including each 95% moisture was $229m^3$ and $277m^3$, respectively, showing 21% ($48m^3$) difference.

• Journal of Animal Environmental Science
• /
• v.10 no.3
• /
• pp.163-168
• /
• 2004

This research was carried out to investigate the moisture evaporation and property change depenging on the composting temperature for the escalator reversing composting system. The system was supported by the Y livestock cooperative composting factory. According to the test, the composting remperature eas varied in the range of $65\~80^{\circ}C$. The water content was de-creased to $75\%$ and became about $60\%$ at the end of the phase. Total nitrogen became $0.58\%$, total phosphoric acid $1.47\%$ and potashium $0.49\%$ at the end of the phase.

• Journal of the Korean Society for Library and Information Science
• /
• v.38 no.4
• /
• pp.167-178
• /
• 2004

The purpose of the study is to identify the degree of relevancy on the facilities for the older persons in the public library buildings. To achieve the purpose, the study has researched and analyzed' the guidelines of the law contributing to the convenience of the handicapped, older persons, pregnant women etc(1999)' for the older persons accessing to the facilities in the public library buildings. And then, the older persons' physical standard sizes in 'Size Korea(1997)' are researched and reconfigured. The study has selected the 10 kinds in such facilities as followed : Door, Accessible Route, Stair, Elevator, Escalator, Ramp, Toilet Stall, Urinal, Table, and Post Box. As the result, the study has identified the relevancies of each facilities based on the older persons's physical standard sizes.

• Journal of Animal Environmental Science
• /
• v.3 no.1
• /
• pp.13-18
• /
• 1997

This study was conducted to investigate the physicochemical changes during the aerobic composting of swine manure mixed with bulking agent, sawdust(v/v, 1:1), in a full-scale composting plant using rectangular escalator-aginated bed composting system. Physical and chemical properties were analyzed on the samples which were collected at 5, 15, and 25 day of composting, curing and final step. The results of this study were summarized as follows; 1. Moisture and K2O content, and pH of final step were higher than those of 5th day of composting (p＜0.05). 2. Ammonium nitrogen, total organic corbon and organic matter content, and electrical conductivity(EC) were significantly decreased (p＜0.05) but nitrate nitrogen, ash and P2O5 content increased(p＜0.05) throughout the aerobic composting process. 3. Total organic carbon per total nitrogen(C/N) and total organic matter per total nitrogen(OM/N) ratio were significantly decreased throughout the aerobic composting process(p＜0.05). 4. Physical and chemical properties of swine manure were varied by aerobic fermentation using rectangular escalor-aginated bed composting system.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.39-40
• /
• 2011

본 논문에서는 포토커플러와 DC모터를 이용한 축소형 자동운전 에스컬레이터를 제작한다. 포토커플러는 전기신호를 빛으로 변환하고 그 빛을 다시 전기신호로 전환하는 회로패스이다. 이 축소형 자동운전 에스컬레이터에는 3개의 포토커플러가 사용이 되고 입구에 하나 출구에 두개를 사용하여 입구의 포토커플러가 켜지면 운행이 되고 출구의 두개의 포토커플러 중 2번 포토커플러가 켜지면 안전을 위해 경보음이 울리게 한다. 여기서 에스컬레이터 양축의 힘의 평형을 위해 두개의 DC모터를 사용해 제작하게 된다. 이 축소형 자동 에스컬레이터는 광센서를 이용하여 전기절약과 안전을 생각한다. 직접 제작을 통해 에스컬레이터가 계속 켜져 있지 않고 필요할 때 켜지게 되므로 전기절약이 되고 경보음으로 인해 안전에 유의할 수 있다.

• The KIPS Transactions:PartA
• /
• v.12A no.1 s.91
• /
• pp.65-70
• /
• 2005

The elevator system which is operated nowadays at skyscrapers, apartments and enterprises does not offer standby passengers any information of which floor the elevator is going to stop or skip. This study will introduce the system that shows the Passengers a running schedule of the elevator. If this system is utilized for current systems, it will bring so much benefit such as shortening waiting time or choosing alternatives for the passengers. Furthermore, this system will be set up not stopping the floor for the passengers who choose alternatives like using stairs or escalators with using toggle switches. This will be efficient to save the electric power.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.11
• /
• pp.79-85
• /
• 2004

A digitally-controlled analog-block inevitably undergoes the bang-bang oscillations which may cause a big amplitudes of the glitches if the oscillation occurs at the MSB transition points of a binary counter. The glitch results into the jitter noise for the case of the DLL. In this paper, we devise a new counter code that has the hysteresis in the bit transitions in order to prevent the transitions of the significant counter-bits at the locking state. The maximum clock jitter is simulated to considerably reduce over the voltage-temperature range guaranteed by specifications. The counter is employed to implement the high speed packet-base DRAM and contributes to the maximized valid data-window.

• Journal of the Korean Society of Safety
• /
• v.30 no.6
• /
• pp.156-163
• /
• 2015

The number of the lifts installed and used in Korea totals up to 526,676 units as of the end of December 2014, due to the development and urbanization of this country. Since the lift is one of the convenience facilities and especially a kind of essential transportation facilities used by a majority of passengers everyday, it is necessarily required to manage the lift safety. Therefore, this study aims to determine the 5 factors(kinds of lifts, ages of victims, causes of accidents, seasons in accidents, usages of buildings) affecting the types(caught in, trip over, falling, collision) and the injury levels(death, serious injury, minor injury) of the lift accidents based on the analysis of the total victims of 1,514 people due to the 1,146 accidents which have occurred for the past 15 years, and to find the frequency and ratio of each factor in the accidents, and to make a correlation among the factors. As the result of the analysis, it shows that there exists a statistically significant correlation among the factors.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.2D
• /
• pp.95-101
• /
• 2012

Layout Criteria are developed for an access mode's on and off facility at multiple transfer centers in this paper. Layout Criteria are location issues between a main mode and access modes in terms of the on and off facility one another. The total distance between them has been suggested to be minimized. In the distance calculation stairs are considered to be more difficult and than open space. On the other hand an escalator and an elevator are treated as easier than open space. Considering the number of people between on and off facility, the weighted average distance is suggested to be a MOE(Measure of effectiveness) for layout criteria at multiple transfer centers. Finally, the layout criteria are applied to the existing Kimpo airport terminal and some improvement ideas are suggested.

• Journal of Internet of Things and Convergence
• /
• v.2 no.2
• /
• pp.7-13
• /
• 2016

They produces the products using conveyer belts in many factories. However, so many accidents are occurred in the conveyer belts at the factories. It needs to prevent the any kinds of accidents in the conveyer belts. In this paper, we designed the smart conveyer belt and developed the smart conveyer control mechanism that provides more safe operation. Particularly, We proposed the methodologies to control conveyer belt using smart phone to prevent the accidents. Through this study, we expect the smart conveyer will be adapt to not only factories but also various kind of conveyer such as escalator in the subway.