• The Journal of Engineering Geology
• /
• v.3 no.1
• /
• pp.75-81
• /
• 1993

Four tecbniques are treated. The technique using the area and the perimeter is very easy but considerable error can be made and commonly the technique using grid is used. Particularly, simaar technique using computer makes possible to represent the slope at each point of the grid and to compare with other data. The tehcnnique using vector product, with which a cuuved surface can be measured directly by segmenting by triangles, is useful but it represent considerable error where the relief is rugged.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.515-518
• /
• 1994

Holographic interferometry is a useful whole-field nondestructive testing for measuring deformations and vibrations of engineering structure. A diverging beam is used as a light source int the most of holographic interferometer practically. For a relatively small object the optical arrangement using a collimated light source has no difficulty in use technically, but for a large object it is difficult to use a collimated beam. In this study we calculate the error of measured displacement from the sensitivity vector dominated by the geometry of optical arrangement for holographic interferometer and show the result obtained with 2-D plots. A Plane surface and a cylindrical surface were chosen as objects to be calculated and computer analysis was carried out for the cases of a diverging beam and a collimated one.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.11
• /
• pp.93-101
• /
• 1993

The transfer function of vector-controlled induction motor is represented along with both unstructured and structured uncertainty such as the error of rotor time constant and current ripple. The low-pass-filter behavior of a magnetizing inductance gets rid of unstructured uncertainty in the transfer function. The robust controller to compensate variation of the transfer function is designed using simple P-I linear controllers. The coefficients of speed PI controller are determined from an overshoot and a rising time of system and the coefficients of model-following PI controller are obtained using the solution of Riccati equation of LQR control in the state space equation of the error system. Experimental results with the DSP-based model-following robust controller are shown a good robustness against the structured uncertainty of the motor.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.05a
• /
• pp.509-513
• /
• 2002

This paper presents a semi-blind Minimum Mean Square Error (MMSE) beamforming adaptive algorithm used far OFDM/CDMA combined system. The proposed algorithm exploits the transmitting pilot signal in the initial period of the transmission to update the weight vector. Then it applies the blind adaptive period to update the weight vector, in which the pilot signal is no longer used. The derivation of the algorithm based on the Mean Square Error (MSE) criterion is also presented. Computer simulation is carried out to verify the performance of the proposed approach.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.45 no.1
• /
• pp.42-53
• /
• 1996

The paper presents a speed control system of vector controlled induct- ion motor using neural networks. The main feature of proposed speed control system is a Neural Network Controller(NNC) which supplies torque current to induction motor and Neural Network Emulator(NNE) which captures the forward dynamics of induction motor. A back propagation training algorithm is employed to train the NNE and NNC. In order to determine the NNC output error, plant(induction motor) output error can be back propagated through the NNE. The NNC and NNE for speed control of vector controlled induction motor is carried out by TMS320C30 DSP and IGBT current regulated PWM inverter. Through computer simulation and experimental results, it is verified that proposed speed control system is robust to the load variation. (author). refs., figs.

• Proceedings of the KIPE Conference
• /
• 2007.07a
• /
• pp.205-207
• /
• 2007

Position information is very important when driving the Permanent Magnet Synchronous Motor(PMSM). Generally, resolver is used to obtain exact position information. However, it generates periodic position errors due to the transformer ratio difference and excitation signal distortion. When the vector control is done with the position information that includes position error, torque ripple is periodically generated. This paper proposes the solution through analysis of above problem. Also, it’s validity is verified by simulation and experiment.

• International Journal of Advanced Culture Technology
• /
• v.10 no.3
• /
• pp.25-32
• /
• 2022

This study analyzes the impact of occupational accidents on economic growth and labor productivty losses in Korea between January 2008 and July 2018, using the Vector Error-Correction Model (VECM). According to the analysis, the occurrence of occupational accidents was revealed to reduce the number of employed workers and also hinder economic growth. This can be reinterpreted as the reduction of occupational accidents does not cause labor losses in the industry, rather may induce economic growth. Also, the findings discovered that an increase in the number of workers may lead to increase in the probability of occupational accidents in the short term. This suggests that greater number of work-related accidents may occur during the early stages- due to new employees' lack of knowledge related to safety at workplace.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.23 no.3
• /
• pp.340-344
• /
• 1986

This paper shows that we can design a vector-coordinate rotation processor and obtain the approximate evaluations of sine and cosine based upon the use of residue number systems. The algorithm results in the considerable improvement of the computation speed when compared to CORDIC algorithm. The results from computer simulation show that the mean error of sine and cosine is 0.0025 and the mean error of coordinate rotation arithmatic is 0.65. Also, the proposed processor has the efficiency for the design and fabrication of integrated circuit, because it consists of the array of idecntially structured look-up tables.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.6
• /
• pp.128-134
• /
• 1997

Holographic interferometry is a useful whole-field nondestructive tesing method for measuring deformations and vibrations of engineering structure. In practical way most holographic interferometer uses a diverging beam, a point light source. When an oject is relatively small, the optical arrangement using a collimated light source has no difficulty technically but for a large object the collimated beam connot be applied anymore practically. In this paper we calculate the error of measured displacement from the sensi- tivity vector dominated by the geometry of optical arrangement for holographic interferometer and show the result with 2-D plots. A plane surface and a cylindrical surface were chosen as objects to be measured and the results from the cases of a diverging and a collimated beams were compared and analyzed.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.5
• /
• pp.252-255
• /
• 2008

In this paper, we apply a discriminative weight training to a support vector machine (SVM) based gender identification. In our approach, the gender decision rule is expressed as the SVM of optimally weighted mel-frequency cepstral coefficients (MFCC) based on a minimum classification error (MCE) method which is different from the previous works in that different weights are assigned to each MFCC filter bank which is considered more realistic. According to the experimental results, the proposed approach is found to be effective for gender identification using SVM.