• Journal of the Korea Institute of Military Science and Technology
• /
• v.25 no.2
• /
• pp.144-150
• /
• 2022

The on-board processor of satellite synthetic aperture radar(SAR) generates transmission signal by digital signal processing, converts it into an analog signal. At this time, the transmission signal generated from the baseband requires the frequency modulation to convert it to the high-frequency band in order to improve the stability. General frequency modulation method using local oscillator(LO) causes IQ imbalance due to phase error/magnitude error and these error reduce performance of SAR. To generate transmission signal without phase/magnitude error, this paper suggests design method of the frequency modulation method using digital to analog converter(DAC) at on-board SAR. For design, this paper analyzes the characteristic of DAC mode and uses pre-compensation filter. To analyze the proposed method performance, performance index are compared with IQ imbalance signals. This method is suitable for on-board SAR using fast sampling DAC and has the advantage of being able to solve IQ imbalances.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.8
• /
• pp.3660-3665
• /
• 2012

For blind equalization, it is necessary to open an eye pattern quickly in the early stage of equalization, after that it is important to lower an error level of equalizer output signal. This paper discusses coarse error estimation using signal points specifically determined and fine error estimation using original signal constellation, and proposes two suggestions for how to take advantage of the two error estimation methods. The two error estimates, respectively, are effective to quickly open an eye pattern in the state of eye pattern closed, or to lower the level of an error in the steady-state after the eye pattern opening. Two blind equalization algorithms are proposed and their performances are compared, which select one of the two error estimates depending on the state of convergence of the equalizer, or combine two errors weightedly according to the relative reliabilities of the two error estimates, and calculate the new error.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.3
• /
• pp.658-665
• /
• 2013

While the chirp signal is extensively used in radar and sonar systems for target decision in wireless communication systems, it has not been widely used for positioning in indoor environments. Recently, the IEEE 802.15.4a standard has adopted the chirp spread spectrum (CSS) as an underlying technique for low-power and low-complexity precise localization. Chirp signal based ranging solutions have been established and deployed but their ranging performance has not been analyzed in multipath environments. This paper presents a ranging performance analysis of a chirp signal and suggests a method to suppress multipath error by using a type of non-linear chirp signal. Multipath ranging performance is evaluated using a conventional linear chirp signal and the proposed non-linear chirp signal. We verify the feasibility of both methods using two-ray multipath model simulation. Our results demonstrate that the proposed non-linear chirp signal can successfully suppress the multipath error.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1741-1744
• /
• 2005

In this paper, we proposed an adaptive skill element based on error signal. We assume that human progress their skills of actions based on errors, then an inverse dynamic of human motion have to changes. Human controller consists from feedback element (FB) and feed forward element (FF) and their elements cooperate to control actions. Under the assumption, we vary the connection of FF and FB by error signal. We propose the index function for change of a skill parameter. From results of the numerical simulations for the varying skill parameter with index function, we consider that the position error given by our vision changes the skill element and we confirm that the position error is the one of the estimate function for the improvement in our skill.

• Korean Journal of Optics and Photonics
• /
• v.8 no.1
• /
• pp.73-79
• /
• 1997

We analyzed the variation of the focus error signal with the effect of land and groove, wavefront error, and optical system parameter variation for the knife-edge and astigmatism methods on the Land/Groove recordable optical disc, using a numerical simulation method. We verified causes of the zero-cross-shift that took place by the effect of land and groove by analyzing the diffraction beam including defocus wavefront errors. We also found that the sensitivty of the focus error signal was reduced by the effect of land and groove in the astigmatism method, as in the analysis of the focus error signal with the each order of the diffraction beam.

• Current Optics and Photonics
• /
• v.3 no.3
• /
• pp.204-209
• /
• 2019

In an optical interferometer that uses sinusoidal modulation and quadrature detection, the amplitude and offset of the interference signal vary with time, even without considering system noise. As a result, the circular Lissajous figure becomes elliptical, with wide lines. We propose and experimentally demonstrate a method for compensating quadrature detection error, based on digital signal processing to deal with scaling and fitting. In scaling, fluctuations in the amplitudes of in-phase and quadrature signals are compensated, and the scaled signals are fitted to a Lissajous unit circle. To do so, we scale the average fluctuation, remove the offset, and fit the ellipse to a unit circle. Our measurements of a target moving with uniform velocity show that we reduce quadrature detection error from 5 to 2 nanometers.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.7-10
• /
• 1998

The error performance of 16 Square-QAM signal with Optimum Threshold Detection(OTD) under the consideration of AWGN and Rician fading was analyzed for various value of Rician fading depth K. And error performance of 16-QAM signal with OTD, which considered in AWGN and Rician fading, was compared with that of 16-QAM signal with OTD, which considered in Rician fading only. And BCH coding is adopted. From the results, the error perfomance evlauated by proposed OTD was superior to that of 16-QAM signal with OTD, which considered in Rician fading without AWGN, in low CNR.

• International journal of advanced smart convergence
• /
• v.2 no.1
• /
• pp.21-23
• /
• 2013

The antenna pattern in this case has a main beam pointed in the desired signal direction, and has a null in the direction of the interference.The conventional antenna pattern concepts of beam width, side lobes, and main beams are not used, as the antenna weights are designed to achieve a set performance criterion such as maximization of the output SNR.A new direction of arrival estimation method using effects of model errors and sensitivity analysis is proposed. Two subspaces are used to form a signal space whose phase shift between the reference signal and its effects of model error signal. Through simulation, the performance showed that the proposed method leads to increased resolution and improved accuracy of DOA estimation relative to those achieved with existing method. Since a desired signal is obtained after interference rejection through correction effects of model error, the effect of channel interference on the estimation is significantly reduced.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.20 no.5
• /
• pp.402-409
• /
• 2015

This paper proposes a novel rotor position error calculation method for high-frequency signal-injected sensorless control. The rotor position error using the conventional modulation method can be only measured up to ${\pm}45^{\circ}$. In addition, when the rotor position estimation error is not sufficiently small, the small angle approximation in no longer valid. To overcome these problems, this study introduces a new rotor position error calculation method using the rotating matrix. In this study, the position error measurement range of the proposed method is extended from ${\pm}45^{\circ}$ to ${\pm}90^{\circ}$. The linearity between the real rotor position error and the estimated error is maintained by nearly $90^{\circ}$. These features of the proposed method improve the performance of the sensorless control. The validity of the proposed method is verified by simulations and experiments.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.11
• /
• pp.1320-1331
• /
• 1992

The error rate equation of FH/MFSK signal of repeated diversity received over m-distribution fading channel with partial-band interference has been derived and the error rate has been evaluated to show in figures as a function of signal to noise ratio, signal to interference ratio, fading figure, repeated number, partial-band interference fraction and power correlation coefficient between signal and interference. In this paper, we assumed that repeated diversity technique is used in transmitter against fading occurred in mobile radio channel. By comparing the error rate performance in diversity against fading and the obtainable degree of improvement of error performance with diversity technique has been found out. From the result, it is known that error rate performance deteriorates more as $\rho$ becomes small i.e., the partial-band interference gives more effect on error performance than full-band interference. Also when the values of $E_b/N_1$ and $\rho$ are small. as depth of fading diversity technique.