• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2004년도 가을 학술발표논문집 Vol.31 No.2 (3)
• /
• pp.499-501
• /
• 2004

본 논문에서 제안하는 웹 기반 멀티미디어 공동 작업 환경에서의 오류 문제를 위한 동시성 제어란 모든 시스템에 분산 시계를 설정하고 명령어에 분산 시계에서 받은 생성 시간(issuing time)을 실어 순서화 분산된 다른 시스템에게 명령어의 발생과 발생 시간을 알린다 발생된 명령어는 자신의 명령어를 먼저 실행하고, 다른 곳에서 도착한 명령어의 시간 값이 다를 경우에만 뷰를 재 생성한다. 이를 통해 비록 네트워크를 통한 동시성 제어 부담을 간접적으로 제거하고 사용자에서의 반응성을 증진시켰다. 즉, 오류 발생 시에 오류도 하나의 명령어로 취급하고 명령어와 오류가 동시에 발생할 시에 명령어를 순서화해 주는 문제에 대한 시스템을 기술한다.

• 전기전자학회논문지
• /
• 제8권1호
• /
• pp.128-135
• /
• 2004

본 논문에서는 sliding-DFT에 순환 구현에 기반한 위상 측정 앨고리즘을 제안하였다. 제안한 앨고리즘은 주파수 변이, 누적 잡음, 계수 근사 영향 등의 오차영향에 강인한 특성을 가지도록 설계되었다. DFT 계수의 유한 비트 근사 구현에 의한 위상 오차는 크기 오차에 비해 매우 작게 나타난다. 위상 오차의 혁신적인 감소는 근사 계수가 복소평면 상에서 4사분면상에 대칭적으로 존재함을 이용하여 얻을 수 있다. 제안한 앨고리즘을 시분할 공유 구조에 기반한 4-채널 전력선 위상 측정 시스템을 설계하고 구현하였다. 구현한 시스템의 동작은 실시간으로 host processor 시스템과 다채널 함수 발생기를 통한 test 환경에서 실험적으로 확인하였다. 제안한 앨고리즘의 위상 측정에 있어 정확한 특성과 유한비트 근사 영향에 강인한 특성은 특히, 빠른 처리 속도와 구현의 감소함이 주요 설계 고려사항인 ASIC 이나 microprocessor에 기반의 임베디드 시스템 적용에 중대한 효과를 제공할 수 있을 것이다.

• 전력전자학회논문지
• /
• 제25권3호
• /
• pp.235-241
• /
• 2020

In this paper, we propose the bus/bypass synchronization phase lock loop (B-Sync PLL) method using each phase voltage controller of a parallel UPS inverter. The B-Sync PLL included in each phase voltage control system of parallel UPS inverters has the transient response and the phase synchronization error at grid normal or blackout. The validity of this method is verified by simulation and experiment. As a result, the parallel UPS inverters using the proposed method confirmed that the output phase was continuously synchronized when a grid blackout, improving the transient response characteristics for stable load power supply and equal load sharing.

• 한국항공운항학회지
• /
• 제18권3호
• /
• pp.1-8
• /
• 2010

A design study has been performed to obtain configuration and weight of a compound gyroplane. A study of research trends and characteristics was performed to develop the compound gyroplane sizing program. Based on these results, the sizing program has been developed and its suitability has been validated using existing compound gyroplane data. The subject air vehicles was a Challis Heliplane UAV, Carter Coptet, FB-1 Gyrodyne, and Jet Gyrodyne. As results, the program was suitable to size a compound gyroplane at conceptual design phase, because the greatest error rate was less than 10% and the conceptual design allowance error rate is less than 15%.

• International Journal of Automotive Technology
• /
• 제6권4호
• /
• pp.375-381
• /
• 2005

This paper presents linear algebraic equations in the form of recursive formula to compute elastokinematic characteristics of a suspension system. Conventional methods of elastokinematic analysis are based on nonlinear kinematic constrant equations and force equilibrium equations for constrained mechanical systems, which require complicated and time-consuming implicit computing methods to obtain the solution. The proposed linearized elastokinematic equations in the form of recursive formula are derived based on the assumption that the displacements of elastokinematic behavior of a constrained mechanical system under external forces are very small. The equations can be easily computerized in codes, and have the advantage of sharing the input data of existing general multi body dynamic analysis codes. The equations can be applied to any form of suspension once the type of kinematic joints and elastic components are identified. The validity of the method has been proved through the comparison of the results from established elastokinematic analysis software. Error estimation and analysis due to piecewise linear assumption are also discussed.

• International journal of advanced smart convergence
• /
• 제9권3호
• /
• pp.141-144
• /
• 2020

Iterative decision feedback equalizer (IDFE) is a recursive equalization technique that can help to achieve an additional performance gain for the system by combining iterative channel decoding and interference cancellation. In a single carrier-based system, the intersymbol interference (ISI) is a critical problem that must be resolved since it causes frequency selective fading. Based on the idea of sharing the estimated information in the process of iteration, IDFE is considered as an efficient solution to improve the robustness of the system performance on the ISI channel. In this paper, the IDFE is applied on single carrier FDMA (SC-FDMA) system to evaluate the performance under ISI channel. The simulation results illustrate that IDFE helps to improve the performance of the SC-FDMA system, especially with long delay spread channels.

• 한국정보기술응용학회:학술대회논문집
• /
• 한국정보기술응용학회 2005년도 6th 2005 International Conference on Computers, Communications and System
• /
• pp.187-190
• /
• 2005

Ultra wideband (UWB) technologies have been developed to exploit a new spectrum resource in substances and to realize ultra-high-speed communication, high precision geolocation, and other applications. The energy of UWB signal is extremely spread from near DC to a few GHz. This means that the interference between conventional narrowband systems and UWB systems is inevitable. However, the interference effects had not previously been studied from UWB wireless systems to conventional mobile wireless systems sharing the frequency bands such as WCDMA system. This paper experimentally evaluates the interference from two kinds of UWB sources, namely a direct-sequence spread-spectrum UWB source and an impulse radio UWB source, to a WCDMA digital transmission system. The average frame error rate degradations are presented. From these experimental results, we show that in all practical cases UWB system can coexist with WCDMA terminal without causing any dangerous interference.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2003년도 추계 학술대회 학술발표 논문집
• /
• pp.80-83
• /
• 2003

In this note, a separation principle of the Takagi-Sugeno (T-S) fuzzy-model-based controller/observer is investigated. The separation principle of T-S fuzzy-model-based controller/observer sharing the premise parts in the fuzzy rule with directly measurable premise variables is well established. In that case, the fact that the augmented observer-based control system has the eigenvalues of the sub-closed-loop control system by the state-feedback controller and the sub-closed-loop observer error system is used to prove the separation principle. This paper studies the separation principle of T-S fuzzy-model-based controller/observer in which the premise variables cannot be directly measurable.

• Journal of Electrical Engineering and Technology
• /
• 제13권3호
• /
• pp.1060-1068
• /
• 2018

Droop control schemes have been widely employed in the control strategies for Multi-Terminal Direct Current (MTDC) system for its high reliability. Under the conventional DC voltage-active power droop control, the droop slope applies a proportional relationship between DC voltage error and active power error for power sharing. Due to the existence of DC network impedance and renewable resource fluctuation, there is inevitably a DC voltage deviation from the droop characteristic, which in turn results in inaccurate control of converter's power. To tackle this issue, a piecewise droop control with DC voltage dead band or active power dead band is implemented into controller design. Besides, an advanced droop control scheme with versatile function is proposed, which enables the converter to regulate DC voltage and AC voltage, control active and reactive power, get participated into frequency control, and feed passive network. The effectiveness of the proposed control method has been verified by simulation results.

• 로봇학회논문지
• /
• 제2권1호
• /
• pp.80-92
• /
• 2007

For the pervasive computing in ubiquitous environment, it is very important to manage the context model to provide pertinent context knowledge to context-aware applications. The context model should be able to support efficiently the context knowledge reusing and sharing as well as reasoning. Previous works focus mainly on the context knowledge representation scheme for reasoning. This paper proposes a context knowledge modeling scheme especially for reusing and sharing. This scheme provides well-established principles and guides for 1) context knowledge modularization and hierarchization, and for 2) context knowledge identification and organization. Once the context models are built according to the scheme, the structure of the context model and the meanings of the context knowledge elements become clear and consistent, so that context-aware applications can share and reuse the context knowledge in easy and error-reduced manner. This paper also discusses the implementation of a context model and an application for Presentation Helper scenario running on a software middleware system (CAMUS) for ubiquitous service robots which is being developed by ETRI Korea.