• 대한기계학회논문집
• /
• 제12권1호
• /
• pp.163-172
• /
• 1988

본 논문에서는 GAC방법을 이용하여 공작기계의 안내면오차를 수치제어 공작기계가 가지고 있는 가공조건의 조절 능력을 이용하여 가공오차를 보상제어 함으로써 규명(identification)할 수 있는 방법을 제시한다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.745-748
• /
• 2008

On investigation about quick measurement technology of unit water at range of W/B=35% in high strength, the average error of the Di-electric constant moisture tester A has measured more than $23.0kg/m^3$ unit water content of design and the average error of the method of unit volume weigh was less than $-9.6kg/m^3$. The average error with mixing factor has influenced with a kind of sand, but had not influenced with unit water content of design. Therefore, it will be for introduce business decide require more than a study about cement, sand, superplasticizer, etc.

• 조명전기설비학회논문지
• /
• 제24권9호
• /
• pp.56-61
• /
• 2010

Scanning head has used to detect the error signal in register controller. However the resolution of the system is not enough for E-printing(Electronic-paper printing). In this paper, the register mark shapes and process techniques are studied using a smart camera which can detect the register mark and calculate the printing error. With these, a register controller within 10[um] of error range is developed for e-printing system and confirmed with experiments.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 B
• /
• pp.992-994
• /
• 1995

FLC has a good performance for complication system or unknown model by using human linguistic method but many part control design are based on expert knowledge or trial-error method and it is difficult to prove stability and robustness of controller. In this paper we improve this problem by setting fuzzy rules by dividing phase plane of error and rate of error change by switching surface. We can guarantee the stability in nonlinear system, and also in fuzzy PID type controller the complexity of controller design is increased by increasing the number of input variables and defining more range of operation if we want performance of more specific rules, thus we need to fine the method to decrease the number of control rules used in FLC design. In this paper the algorithm is validated by simulation using conventional FLC and proposed method.

• 제어로봇시스템학회논문지
• /
• 제11권8호
• /
• pp.678-687
• /
• 2005

This paper describes a relative localization algorithm using odometry data and consecutive local maps. The purpose of this paper is the odometry error correction using the area matching of two consecutive local maps. The local map is built up using a sensor module with dual laser beams and USB camera. The range data form the sensor module is measured using the structured lighting technique (active stereo method). The advantage in using the sensor module is to be able to get a local map at once within the camera view angle. With this advantage, we propose the AVS (Aligned View Sector) matching algorithm for. correction of the pose error (translational and rotational error). In order to evaluate the proposed algorithm, experiments are performed in real environment.

• 제어로봇시스템학회논문지
• /
• 제6권1호
• /
• pp.15-24
• /
• 2000

Stand-alone global position system receiver based on C/A code tracking generates position error of 100m mainly due to the selective availability and ionospheric and tropospheric delay errors. The differential GPS is the most commonly used method for removing those bias range error components. The relative GPS, although somewhat restrictive in its use, is ideally suited to the car monitoring system for improved Automatic Vehicle location, especially where the DGPS infrastructure is not available. The RGPS does not require any additional hardware, facility or external infrastructure and can be operated within the system with existing host computer and communication link. This paper presents detailed description of the RGPS concept and its implementation for real-time data processing. Performance of RGPS is evaluated with real data and is compared with DGPS.

• Nuclear Engineering and Technology
• /
• 제25권3호
• /
• pp.371-380
• /
• 1993

운전원의 언어적인 제어 논리를 이용한 모델과 무관한 제어기가 증기 발생기의 수위 제어를 위해 개발되었다. 오직 9개의 룰을 수위 오차와, 응축 수위 변화를 표현하는 유량 오차로부터 얻어졌다. 벨형의 소속함수는 민감도 분석을 통하여 조절되었고, 결과 과도 상태와 정상상태 공히 양호한 제어성능을 보였다. 저출력에서 전 출력까지의 다단계 출력 증가에 대하여, 전 운전 영역에서 좋은 제어를 보였다.

• 약학회지
• /
• 제47권5호
• /
• pp.261-265
• /
• 2003

Near-infrared (NIR) system was used to determine rapidly and simply indomethacin in buffer solution for a dissolution test of tablets and capsules. Indomethacin standards were prepared ranging from 10 to 50 ppm using the mixture of phosphate buffer (pH 7.2) and water (1 : 4). The near-infrared (NIR) transmittance spectra of indomethacin standard solutions were collected by using a quartz cell in 1 mm and 2 mm pathlength. Partial least square regression (PLSR) was explored to develop calibration models over the spectral range 1100∼1700 nm. The model using 1 mm quartz cell was better than that using 2 mm quartz cell. The PLSR models developed gave standard error of prediction (SEP) of 0.858 ppm. In order to validate the developed calibration model, routine analysis was performed using another standard solutions. The NIR routine analysis showed good correlation with actual values. Standard error of prediction (SEP) is 1.414 ppm for 7 indomethacin samples in routine analysis and its error was permeable in the regulation of Korean Pharmacopoeia (VII). These results show the potential use of the real time monitoring for indomethacin during a dissolution test.

• 천문학회지
• /
• 제50권1호
• /
• pp.1-5
• /
• 2017

Like Hipparcos, Gaia is designed to give absolute parallaxes, independent of any astrophysical reference system. And indeed, Gaia's internal zero-point error for parallaxes is likely to be smaller than any individual parallax error. Nevertheless, due in part to mechanical issues of unknown origin, there are many astrophysical questions for which the parallax zero-point error ${\sigma}({\pi}_0)$ will be the fundamentally limiting constraint. These include the distance to the Large Magellanic Cloud and the Galactic Center. We show that by using the photometric parallax estimates for RR Lyrae stars (RRL) within 8kpc, via the ultra-precise infrared period-luminosity relation, one can independently determine a hyper-precise value for ${\pi}_0$. Despite their paucity relative to bright quasars, we show that RRL are competitive due to their order-of-magnitude improved parallax precision for each individual object relative to bright quasars. We show that this method is mathematically robust and well-approximated by analytic formulae over a wide range of relevant distances.

• Journal of Preventive Medicine and Public Health
• /
• 제40권2호
• /
• pp.108-113
• /
• 2007

When conducting large-scale cohort studies, numerous statistical issues arise from the range of study design, data collection, data analysis and interpretation. In genomic cohort studies, these statistical problems become more complicated, which need to be carefully dealt with. Rapid technical advances in genomic studies produce enormous amount of data to be analyzed and traditional statistical methods are no longer sufficient to handle these data. In this paper, we reviewed several important statistical issues that occur frequently in large-scale genomic cohort studies, including measurement error and its relevant correction methods, cost-efficient design strategy for main cohort and validation studies, inflated Type I error, gene-gene and gene-environment interaction and time-varying hazard ratios. It is very important to employ appropriate statistical methods in order to make the best use of valuable cohort data and produce valid and reliable study results.