• Proceedings of the KSRS Conference
• /
• 2006.03a
• /
• pp.341-343
• /
• 2006

The current spectral shape matching method (SSMM), developed by Ahn and Shanmugam (2004), relies on the assumption that the path radiance resulting from scattered photons due to air molecules and aerosols and possibly direct-reflected light from the air-sea interface is spatially homogeneous over the sub-scene of interest, enabling the retrieval of water-leaving radiances ($L_w$) from the satellite ocean color image data. This assumption remains valid for the clear atmospheric conditions, but when the distribution of aerosol loadings varies dramatically the above postulation of spatial homogeneity will be violated. In this study, we present the second version of SSMM which will take into account the horizontal variations of aerosol loading in the correction of atmospheric effects in SeaWiFS ocean color image data. The new version includes models for the correction of the effects of aerosols and Raleigh particles and a method fur computation of diffuse transmittance ($t_{os}$) as similar to SeaWiFS. We tested this method over the different optical environments and compared its effectiveness with the results of standard atmospheric correction (SAC) algorithm (Gordon and Wang, 1994) and those from in-situ observations. Findings revealed that the SAC algorithm appeared to distort the spectral shape of water-leaving radiance spectra in suspended sediments (SS) and algal bloom dominated-areas and frequently yielded underestimated or often negative values in the lower green and blue part of the electromagnetic spectrum. Retrieval of water-leaving radiances in coastal waters with very high sediments, for instance = > 8g $m^{-3}$, was not possible with the SAC algorithm. As the current SAC algorithm does not include models for the Asian aerosols, the water-leaving radiances over the aerosol-dominated areas could not be retrieved from the image and large errors often resulted from an inappropriate extrapolation of the estimated aerosol radiance from two IR bands to visible spectrum. In contrast to the above results, the new SSMM enabled accurate retrieval of water-leaving radiances in a various range of turbid waters with SS concentrations from 1 to 100 g $m^{-3}$ that closely matched with those from the in-situ observations. Regardless of the spectral band, the RMS error deviation was minimum of 0.003 and maximum of 0.46, in contrast with those of 0.26 and 0.81, respectively, for SAC algorithm. The new SSMM also remove all aerosol effects excluding areas for which the signal-to-noise ratio is much lower than the water signal.

• Korean Journal of Veterinary Service
• /
• v.39 no.1
• /
• pp.13-20
• /
• 2016

This study is aimed to find out distribution status of online-market livestock products by purchasing and examining 120 cases of livestock products (seasoned meat: 17, 33 cases of packaged meat, 23 cases of ground meat, 19 cases of ham, 11 cases of sausage, 4 cases of bacon, 1 case of meat processing, 8 cases of Meat extract processed, and 4 cased of Dry storage of meat) at 17 On-line markets from April to August. 2015. We checked the weight of them first, and carried out ingredients test for each of processed meats. And we performed gene screening test on the products which were labelled 'Hanwoo' to investigate that the products were made of Korean native cattle. we also carried out test of identifying domestic animal species on ham, sausage and ground processed products. After weighing all products, we could know that all of them were delivered more than labelled weight or in allowable error. The result values of test which measured level of preservatives, Nitrite, Volatile Basic Nitrite (VBN), and tar Color by the type of processed meat products were in permissible range or not detected. Also, 17 beefs inspected Korean native cattle gene test were confirmed that they were made by real korean native cattle. But 2 cases of Ham, sausage, and ground processed products had difference between label and goods. In this study, we could make a decision that livestock products, distributed in On-line markets, were safe and expect to make higher degrees of hygiene for livestock products seller. Futhermore, we hoped result of this study could be used by basic data for progressive national policy decisions.

• Journal of Korea Water Resources Association
• /
• v.51 no.8
• /
• pp.687-701
• /
• 2018

A multi-function weir is representative control structure in the stream flow. Estimation of accurate flood discharge according to gate operations and prediction of floodwave travel times at the downstream are very important in terms of water use and river management. This study analyzed the limitation and improvement through the current gate operation data on the Young-san river. in addition, flood discharge was calculated considering lower and upper water level condition and gate operating using the modified slope-area method in the Seoung-chon weir. As a result, the current state was required improvement because exceed the theoretical range and rapidly fluctuation of discharge coefficient, can not be considered difference between the upper and lower water level and the estimation by the regression equation. As a result of applying the proposed method in this study, the above mentioned limitations can be compensated, compared with the current discharge data. Also it was analyzed as more physically valid because using the evaluated hydraulic equation and estimate the slope and friction loss of natural stream by iteration and to reduce the error. In conclusion, the process carried out serves as a representative flow control point of the water system through reliable discharge estimation, it is expected that it will be possible to properly river management.

• Journal of Acupuncture Research
• /
• v.24 no.5
• /
• pp.207-217
• /
• 2007

Objectives: We investigated the safty of distilled Astragali Radix Herbal Acupuncture, Wild Ginseng Herbal Acupuncture and Rehmannia glutinosa Herbal Acupuncture on vital sign -BP, pulse, resperation-in adult man. Methods : We investigated on 106 healthy volunteers consisted of each 30 subjects in experiment (distilled Astragali Radix Herbal Acupuncture, Wild Ginseng Herbal Acupuncture and Rehmannia glutinosa Herbal Acupuncture) group and 30 subjects in control(Normal Saline) group. Study form was a randomized, placebo-controlled, double-blind clinical trial. 30 subjects in each experiment group were injected distilled Astragali Radix Herbal Acupuncture, Wild Ginseng Herbal Acupuncture, Rehmannia glutinosa Herbal Acupuncture at $GB_{21}$(Kyonjong) and 30 subjects in control group were injected Normal Saline at $GB_{21}$ (Kyonjong). except of 2 subjects(in control group) who can't be measured and 10 subjects(6 in experiment group and 4 in control group) who move or make unforceable error during measuring. Finally each 25. subject, subject, subject in experiment group and 24 subject in control group are studied. We measured resperation by PolyG-I and BP & pulse by electric manometer on 5 times : before injection per 5 minutes during and after injection per 10 minutes during 35 minutes. The SPSS 13.0 for windows was used to analyze the data and the Student t test(between two groups) were used to verify the result. Results : 1. After distilled Astragali Radix Herbal Acupuncture injection, Wild Ginseng Herbal Acupuncture and Rehmannia glutinosa Herbal Acupuncture , systolic BP is not significantly change in all experiment time. 2. After distilled Astragali Radix Herbal Acupuncture injection, Wild Ginseng Herbal Acupuncture and Rehmannia glutinosa Herbal Acupuncture , diastolic BP is not significantly change in all experiment time. 3. After distilled Astragali Radix Herbal Acupuncture injection, Wild Ginseng Herbal Acupuncture and Rehmannia glutinosa Herbal Acupuncture , pulse is not significantly change in all experiment time. 4. After distilled Astragali Radix Herbal Acupuncture injection, Wild Ginseng Herbal Acupuncture and Rehmannia glutinosa Herbal Acupuncture , resperation is not significantly change in all experiment time. Conclusions : The results suggest that distilled Astragali Radix Herbal Acupuncture, Wild Ginseng Herbal Acupuncture and Rehmannia glutinosa Herbal Acupuncture in healthy adult man don't influence vital sign within normal range. This result is derived from that distilled Astragali Radix Herbal Acupuncture, Wild Ginseng Herbal Acupuncture and Rehmannia glutinosa Herbal Acupuncture in healthy adult man are safety.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.27 no.1
• /
• pp.55-71
• /
• 1997

Digora/sup (R)/ an intraoral digital radiography system utilizing image plate (IP) - has a dynamic range of exposure time which allows it to decrease the patient's exposure time and to increase diagnostic ability through image processing, transmission and storage. The purpose of this study was to evaluate the Digora/sup (R)/ system by assessing the effects of various exposure times on the detectability on the tip of the endodontic file. Examining the root canals of 45 extracted sound premolars, K -files No. 10, 15, and 20 were placed at slightly varying distances from the apex. The teeth were glued onto resin-plaster blocks. Five exposure times varying between 0.01 seconds and 0.25 seconds were used. Four observers were asked to measure the distance between the tip of the file and a reduction of crown portion, and obtained mean errors (subtracting true file length from the measured file length), comparing Digora/sup (R)/ monitors with E-plus films, which were both obtained under the same geometrical positions. The results were as follows : 1. Comparing E-plus film with Digora/sup (R)/ at 0.01 seconds, the mean errors in E-plus film showed -4.453 nun, -4.497 nun, and -3.857 nun, while the mean errors in Digora/sup (R)/ showed 0.065 nun, 0.607 nun, and 0.719 mm according to the file groups. Therefore there was a significant difference between E-plus film and Digora/sup (R)/(p<0.05). 2. By comparison of mean errors according to the various exposure times in the Digora/sup (R)/ system, the mean error at 0.01 seconds was significantly lower than that at 0.12 and 0.25 seconds in the No. 10 file group(p<0.05). And the standard deviation was the highest at 0.01 seconds. 3. Comparing E-plus film at 0.25 seconds with the Digora/sup (R)/ system, the mean errors showed a significant difference between E-plus film at 0.25 seconds and the Digora/sup (R)/ system at 0.25 seconds in No. 10 and 20 file groups(p<0.05). 4. Comparing E -plus film at 0.25 seconds with other exposure times, the mean errors showed a significant difference between E-plus film at 0.25 seconds and E-plus film at 0 .. 01 and 0.03 seconds in 10 file group(p<0.05). In the No. 15 and 20 file groups, there was a significant difference between E-plus film at 0.25 seconds and E-plus film at 0.01 seconds(p<0.05). In conclusion, Digora/sup (R)/ was better than E-plus film in detectability on the tip of the file at the exposure time of 0.01 seconds in all file groups. And we concluded that Digora/sup (R)/ can shorten exposure times up to 4％ of 0.25 seconds (0.01 sec), which is adequate exposure time for premolar in E-plus film using No. 15 and 20 files.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.6
• /
• pp.55-63
• /
• 2009

Since the introduction of 32 Automated Speed Enforcement System in Korea 1997, their application was expanded to the entire nation and, as of January 2008, there are 3,212 Automated Speed Enforcement System that are in operation. The existing method of evaluating the effects of the Automated Speed Enforcement System application is simple comparison of a year before and a year after the application. If the number of traffic accidents dramatically increased(or decreased) the year before the application compared to the numbers from years before that, then if the number decreased(or increased) after the Automated Speed Enforcement System application, it cannot be concluded that the change was caused by the Automated Speed Enforcement System application alone. Based on the 4-Step Before-After study, the method of evaluating the effect of an Automated Speed Enforcement System application was analyzed anew. At 205 locations where Automated Speed Enforcement System was applied in 2006, the existing evaluation stated a reduction of 19% in the number of traffic accidents, but when reanalyzed for the method suggested in this paper, the effect of the Automated Speed Enforcement System was found to be $27.4{\pm}3$, along with an error range of ${\pm}12.89%$ due to miscellaneous improvement.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.2
• /
• pp.22-34
• /
• 2011

This paper presents the investigation results of a research on how engineers can analyze the economic effect of the ETCS(Electronic Toll Collection System) installed to minimize the vehicle delays on freeway tollgates during toll payments. This research considered this economic effect to occur in the form of vehicle passing time reductions at the ETCS, and the multi-service queuing theory was applied to estimate these values. This research found: 1) When vehicles approaching tollgates show Poisson distribution and the service time of the ETCS shows Exponential distribution, the multi-service queuing theory would be applicable for estimating vehicle passing times at toll-gates, 2) Despite the ETCS placement, exit sections of tollgates give a greater reduction of vehicle passing times than entering sections due to more delays at conventional toll payments, and 3)The ETCS would not guarantee vehicle passing time reductions all the time, because in such a case as many vehicles were queuing at the ETCS, the total delay level for a toll gate would increase greatly. In addition, in order to examine the accuracy of the estimated vehicle passing values, this research compared the values from the multi-service queuing theory with the observed values from a set of field survey values at freeway toll-gates, and found that the two values were in a good agreement with a very low error range of 1-3 seconds per vehicle. Based on this result, the multi-service queuing theory was recommended for practice.

• Korean Chemical Engineering Research
• /
• v.46 no.3
• /
• pp.486-491
• /
• 2008

This paper describes a model identification method that has been applied to a commercial 12-inch RTP (rapid thermal processing) equipment with an ultimate aim to develop a high-performance advanced controller. Seven thermocouples are attached on the wafer surface and twelve tungsten-halogen lamp groups are used to heat up the wafer. To obtain a MIMO balanced state space model, multiple SIMO (single-input multiple-output) identification with highorder ARX models have been conducted and the resulting models have been combined, transformed and reduced to a MIMO balanced state space model through a balanced truncation technique. The identification experiments were designed to minimize the wafer warpage and an output linearization block has been proposed for compensation of the nonlinearity from the radiation-dominant heat transfer. As a result from the identification at around 600, 700, and $800^{\circ}C$, respectively, it was found that $y=T(K)^2$ and the state dimension of 80-100 are most desirable. With this choice the root-mean-square value of the one-step-ahead temperature prediction error was found to be in the range of 0.125-0.135 K.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.1
• /
• pp.42-52
• /
• 2017

DASH (Dynamic Adaptive Streaming over HTTP) is an adaptive streaming technique that enables transmission of multimedia content when clients request the multimedia contents to server. In this system, to ensure the best quality of the content to satisfy users, it is necessary to precisely measure the residual bandwidth. However, the measured residual bandwidth by the DASH, which is not considering the transmission features of TCP, varies by the size of previous media segment, which makes it hard to ensure QoE to users. In this paper, we excluded the TCP Slow start range from measurement of residual bandwidth and suggested the new DASH bandwidth measuring method to decrease the error. Then, we realized the method in DASH system based on open source, and compared the existing measuring method. The new method showed that the accuracy of result has increased by 20%. Also, it could improve the QoE of users in terms of service quality and number of changes of segment quality.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.6
• /
• pp.169-179
• /
• 2003

Undrained shear strength of clay deposit is one of the most important properties in the design of geotechnical structures. The use of piezocone test is rapidly growing due to its merit that can measure the in-situ undrained shear strength continuously with less error. The reliability of the shear strength from piezocone test depends upon the cone factor applied. Many researchers have suggested different ranges of values for the factors. This study performs to find out the validity of the suggested values in Korea and their charateristics related to the mechanical properties of clay. Piezocone tests were performed at the site of pilot project of ground improvement at Yangsan-Mulgeum Gyeongnam to investigate the charateristics of piezocone factors. The piezocone fators$(N_{kt}, N_{ke}, N_{\Delta u})$ based on the undrained shear strength from quick triaxial compression test are generally within the suggested range. And there appears considerable relations between undrained shear strength and $(N_{kt}, N_{ke}, N_{\Delta u})$ and between preconsolidation pressure and $(N_{kt}, N_{ke})$, while plasticity index, rigidity index and friction ratio do not show any relations with cone factors. The results also reveal that factor $(N_{\Delta u})$ shows higher reliability than factors $(N_{kt} and N_{ke})$, which show smaller standard deviation, breadth of change and scattering.