• Journal of information and communication convergence engineering
• /
• 제1권4호
• /
• pp.189-193
• /
• 2003

A new algorithm is presented for adaptive notch filtering of narrow band or sine signals for embedded among broad band noise. The notch filter is implemented as a constrained infinite impulse response filter with a minimal number of parameters, Based on the recursive prediction error (RPE) method, the algorithm has the advantages of the fast convergence, accurate results and initial estimate of filter coefficient and its covariance is revealed. A convergence criterion is also developed. By using the information of the noise-to-signal power, the algorithm can self-adjust its initial filter coefficient estimate and its covariance to ensure convergence.

• Journal of the Korean Statistical Society
• /
• 제8권1호
• /
• pp.37-64
• /
• 1979

Criteria and designs are developed for estimating derivatives of P-variable second order polynomial response surfaces. The basic criterion used is mean square error of the estimated derivative, averaged over all directions and then averaged over a region of interest. A new design concept called slope-rotatability is introduced. A simplex optimization program is used to find minimum mena square error designs for the two variable case for $6 \leq N \leq 12$.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제10권2호
• /
• pp.128-133
• /
• 2010

This paper presents a method for estimating the parameters of dynamic models for induction motor dominating loads. Using particle swarm optimization, the method finds the adequate set of parameters that best fit the sampling data from the measurement for a period of time, minimizing the error of the outputs, active and reactive power demands and satisfying the steady-state error criterion.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 1995년도 학술대회
• /
• pp.59-61
• /
• 1995

An adaptive code rate change scheme in DS-SSMA systems is proposed. In the proposed scheme, the error correcting code rate is changed according to the channel state, the effective number of users. The channel state is estimated based on retransmission requests. The criterion for the change of the code rate is to maximize the throughput under given error bound.

• 한국전산구조공학회논문집
• /
• 제30권2호
• /
• pp.137-143
• /
• 2017

본 논문에서는 파괴에너지이론에 기초하여 요소의존성을 최소화할 수 있는 인장파괴기준식을 제안하고 HJC(holmquist johnson cook), CSC(continuous surface cap), Orthotropic 모델을 이용한 폭발수치해석을 통해 기준식을 검증하였다. 폭발하중으로 인한 RC 보의 시간에 따른 중앙지점의 처짐을 실험결과와 비교하였다. 그 결과 기준식을 통해 산정된 파괴변형률을 수치해석상에 적용해줌으로써 해석결과의 요소의존성이 감소하였고 해의 정확성 또한 향상되는 것을 파악할 수 있었다.

• 한국통신학회논문지
• /
• 제35권1C호
• /
• pp.33-39
• /
• 2010

코렌트로피는 일반화된 상관함수로서 확률밀도함수의 고차 모멘트를 가지는데 이는 기존의 모멘트 확장 방식들보다 더 높은 고차 모멘트이다. 두 다른 랜덤 변수의 상호 코렌트로피를 최대화하는 이 기준 방식은 최소자승오차 기준 방식과 비교할 때, 비선형, 비 가우시안 신호 처리 환경에서 특히 탁월한 성능을 나타낸다. 이 논문에서는, 상호 코렌트로피 기준에 근거한 새로운 블라인드 등화 기법을 제안한다. 이 기법은 등화기 출력의 확률밀도함수와, 송신 심볼의 분포에 맞추어 발생시킨 랜덤심볼의 파전 확률밀도 추정치라는 두 확률변수에 상호 코렌트로피를 적용한다. 상호 코렌트로피에 근거한 제안 방식의 블라인드 등화 성능을 유클리디언 거리 최소화 방식과 비교하였다.

• Nuclear Engineering and Technology
• /
• 제54권8호
• /
• pp.3043-3050
• /
• 2022

In Korea, all nuclear power plants (NPPs) participate in annual performance tests including in vivo measurements using the FastScan, a stand type whole body counter (WBC), manufactured by Canberra. In 2018, all Korean NPPs satisfied the testing criterion, the root mean square error (RMSE) ≤ 0.25, for the whole body configuration, but three NPPs which participated in an additional lung configuration test in the fission and activation product category did not meet the criterion. Due to the low resolution of the FastScan NaI(Tl) detectors, the conventional peak analysis (PA) method of the FastScan did not show sufficient performance to meet the criterion in the presence of interfering radioisotopes (RIs), ¹³⁴Cs and ¹³⁷Cs. In this study, we developed an artificial neural network (ANN) to improve the performance of the FastScan in the lung configuration. All of the RMSE values derived by the ANN satisfied the criterion, even though the photopeaks of ¹³⁴Cs and ¹³⁷Cs interfered with those of the analytes or the analyte photopeaks were located in a low-energy region below 300 keV. Since the ANN performed better than the PA method, it would be expected to be a promising approach to improve the accuracy and precision of in vivo FastScan measurement for the lung configuration.

• 한국통신학회논문지
• /
• 제19권6호
• /
• pp.1095-1106
• /
• 1994

본 논문에서는 최소자승오차법(LMSE, least mean square error)을 이용하여 function processing(FP) 형태학 필터를 최적화하는 알고리즘을 제안한다. Erosion이나 dilation 연산들은 원하는 신호와 실제 필터의 출력 신호 사이의 평균자승오차(MSE, mean square error)를 최소화하는 농담(農談) 구조요소(GSE. grayscale structuring element)를 결정함으로써 최적화 된다. 본 논문에서는 LMS 트레이닝 알고리즘을 형태학 필터의 최적화에 적용하기 위하여 스텝 사이즈 매개변수 n가 만족해야 하는 조건을 보이고, 이를 이용하여 erosion이나 dilation 형태학 필터들의 최적 GSE를 결정할 수 있음을 보였다. 또한, 본 논문에서는 행렬을 사용하여 복합 형상한 연산들을 소역 행열 연산자로 새롭게 정의하고, 이소역 연산들에 LMS 알고리즘과 back-propagation 알고리즘을 적용하여 복합 형태학 필터들을 최적화할 수 있음을 보였다. 실험 부분에서는 제안된 최적 형상학 필터들을 2-D 영상에 적용한 결과를 보였다.

• Journal of Communications and Networks
• /
• 제5권2호
• /
• pp.135-140
• /
• 2003

In this paper, we investigate the error performance of a serially concatenated system using a nonrecursive convolutional code as the outer code and a recursive QPSK space-time trellis code as the inner code on quasi-static and rapid Rayleigh fading channels. At the receiver, we consider iterative decoding based on the maximum a posteriori (MAP) algorithm. The performance is evaluated by means of computer simulations and it is shown that better error performance can be obtained by using low complexity outer and/or inner codes and the Euclidean distance criterion based recursive space-time inner codes. We also obtain new systems with large number of trasmit and/or receive antennas providing good error performance.

• 한국정밀공학회지
• /
• 제14권2호
• /
• pp.13-22
• /
• 1997

Strapdown inertial navigation system(SDINS) is a navigational instruments necessary to guide and con- trol a free vehicle. In this study, an error analysis of mechanical parts is carried out for manufacturing a dynamically tuned gyroscope. The errors usually come from the tolerance in machining and assembly. In the error analysis, a criterion to be considered during designing and manufacturing is proposed by quanti- tatively analyzing the effect of DTG performance by tolerances. The theory of dynamic balancing is deduced and unbalance is reduced through experiment.