• ETRI Journal
• /
• v.32 no.2
• /
• pp.273-280
• /
• 2010

The overall channel capacity of a multihop wireless path drops progressively over each hop due to the cascading effect of noise and interference. Hence, without optimal rate adaptation, the video quality is expected to degrade significantly at any client located at a far-edge of an ad-hoc network. To overcome this limitation, decoding and forwarding (DF), which fully decodes codewords at each intermediate node, can be employed to provide the best video quality. However, complexity and memory usage for DF are significantly high. Consequently, we propose syndrome-based partial decoding (SPD). In the SPD framework an intermediate node partially decodes a codeword and relays the packet along with its syndromes if the packet is corrupted. We demonstrate the efficacy of the proposed scheme by simulations using actual 802.11b wireless traces. The trace-driven simulations show that the proposed SPD framework, which reduces the overall processing requirements of intermediate nodes, provides reasonably high goodput when compared to simple forwarding and less complexity and memory requirements when compared to DF.

• Journal of Biomedical Engineering Research
• /
• v.19 no.1
• /
• pp.9-18
• /
• 1998

In this paper, we present the degradation of focusing induced by velocity inhomogeneity in human tissue. For simulation, the fatty layer which is the major factor of degradation for its lower velocity, is modeled as a uniform velocity perturbation layer. And we simulate the degradation of resolution resulting from change of beam path due to refraction and the time delay due to velocity difference. We show that focusing error can be compensated for considering the velocity inhomogeneity only. The proposed compensation method can be operated in real time in the presently used digital focusing systems.

• Journal of the Korean Data and Information Science Society
• /
• v.22 no.1
• /
• pp.9-18
• /
• 2011

After the launch of PCS in 1997, the mobile telephone industry has achieved a remarkable growth in market share and sales, and substituted for long-distance wire communication market. This study investigates the interrelationships between the two markets in transition and attempts to perform the statistical tests if the diffusion of mobile telephone was the direct factor for the reduction in sales of long-distance communication industry. The evidence of the direct substitution effect between the two markets is not likely to be found. Unlike the general expectations, the test result seems to prove the sustained initial complementary relation for awhile.

• Journal of Korean Ophthalmic Optics Society
• /
• v.12 no.3
• /
• pp.121-124
• /
• 2007

Ablation depth of cornea in refractive keratectomy was calculated by Munnerlyn formula. The calculations were preformed for various optical diameter (4 mm~8 mm) and various amount of corrections (-1 Dptr ~ -12 Dptr). The results to be compared with the Munnerlyn approximated formula had little effect within lower corrections, but in higher corrections > 6 Dptr can be occurred the error of 1 Dptr. Although ablation depth were evaluated, the results were only calculated by mathematical model of geometric assumptions. Because ablation depth can vary with operation conditions, the correction factor should be considered not only ablation depth by Munnerlyn formula but also surgeon-specific factor.

• Journal of Satellite, Information and Communications
• /
• v.10 no.3
• /
• pp.73-77
• /
• 2015

In this paper, we present two simulation methods to investigate the effect of excluding bit errors on generating the extrinsic information transfer (EXIT) chart for low density parity check (LDPC) and turbo codes. We utilized the simulation methods including and excluding bit errors to generate EXIT chart which was originally proposed for turbo codes. The generated EXIT charts for LDPC and turbo codes shows that the presented methods appropriately demonstrates the performance behaviours of iterative decoding for LDPC and turbo codes. Analysis on the simulation results demonstrates that the EXIT chart excluding the bit errors shows only a small part of the curves where the amount of information is too large.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.9 s.186
• /
• pp.134-141
• /
• 2006

Surface deflections have a great effect on the external appearance of automobiles. Usually, they are occurred on large flat panels containing sudden shape changes and of very small size about $\pm$30$\sim$300$\mu$m. Since the current numerical method is not sufficient for predicting these defects, the correction of these defects still depends on trial and error, which requires a great deal of time and expense. Consequently, developing the numerical method to predict and prevent these defects is very important far improving cosmetic surface qualities. In this study, an evaluation system that can analyze surface deflections using numerical simulation and a visualization system are reported. To calculate the surface deflections numerically, robust algorithms and simulation methodologies are suggested and to visualize them quantitatively, the curvature variation algorithm is proposed. To verify the developed systems, the experimental die of the handle portion of exterior door is analyzed. The results showed that the experimental and simulational visualization are in good agreement. Compensation methods to correct the surface deflections are also tested. The evaluation system proposed in this paper could be used to predict and minimize the occurrence of surface deflections in die manufacturing.

• Journal of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.73-73
• /
• 2003

Proof correction to the equation in the third paragraph of the DISCUSSION AND CONCLUSION has not been carried faithfully to the published version of the paper. The corrected equation should read ${\approx}10^{-3}\;M_8^4/^3(N_{\ast}/10^6\;pc^{-3})({\sigma}/300 km\;s^{-l})^{-l}(r/r_t)\;yr^{-1}$, where Ms is the mass of the SMBH in units of $10^8\;M_{\bigodot}$, $\sigma$ is the virial velocity of the stars, $r_t$ is the tidal radius of the SMBH. This estimates the frequency that a star would pass within a sphere with the radius r from the SMBH, rather than the frequency of the tidal disruption event. Therefore, it increases with the mass of the SMBH. However, the loss cone effect should also be taken into account, which reduces the actual event rate. Here, we adopted a factor of one hundred to consider the deficiency from the isotrophic rate. The authors sincerely regret this error.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.10
• /
• pp.142-147
• /
• 2012

This paper presents a mixed-mode CMOS duty-cycle corrector (DCC) circuit that has a dynamic frequency scaling (DFS) counter and coarse and fine tuning adjustments. A higher duty-cycle correction accuracy and smaller jitter have been achieved by utilizing the DFS counter that reduces the bit-switching glitch effect of a digital to analog converter (DAC). The proposed circuit has been designed using a 0.18-${\mu}m$ CMOS process. The measured duty cycle error is less than ${\pm}1.1%$ for a wide input duty-cycle range of 25-75% over a wide freqeuncy range of 0.5-1.5 GHz.

• Journal of Distribution Science
• /
• v.15 no.3
• /
• pp.17-25
• /
• 2017

Purpose - The study is to examine the impact of the US Purchasing Managers' Index (PMI) on Korea and the US industrial economy including the distribution industry. We analyze its effect on the industrial economy centered on the distribution industry using economy indices in Korea and the US. Research design, data, and methodology - The variables are used to analyze the dynamic relationship which occurs among the US PMI, the industrial production index, producer price index, unemployment rate, and manufacturing Inventories Index in Korea and the US from January 1990 to July 2016 using Vector Error Correction Model. Results - As a main result, the impact of the US PMI on all the economy indices both Korea and the US has the same cyclical movement. The US PMI is positively related to the producer price and the industrial production index of Korea and the US, while it is negatively related to unemployment rate, and the manufacturing inventories index in Korea and the US. Conclusions - The US PMI as an advanced index has a power to predict the economies on Korea and the US. In the end, we find that the US PMI has a great impact on Korea and the US industrial economy.

• Journal of Distribution Science
• /
• v.11 no.7
• /
• pp.15-22
• /
• 2013

Purpose - The study investigates the influence of tourism and hospitality industry on economic growth and CO2 emissions. Research design, data, and methodology - In the empirical analysis, unit root tests, cointegration test and vector error correction model regression using time series data of South Korea from the first quarter of 1970 to the third quarter of 2010 are performed to examine the long-run equilibrium relationship and short-run dynamics among the tourism and hospitality industry, CO2 emissions, economic growth and other industry sectors. Results - Results indicate that a long-run equilibrium relationship exists among these variables. Furthermore, the tourism and hospitality industry and CO2 emissions have high significant positive effect on economic growth. The tourism and hospitality industry in Korea, in turns, shows a high significant positive impact on economic growth while the industry sector incursa high significant negative impact on CO2 emissions. Conclusions - The tourism and hospitality industry in Korea may havebeen prompted by several factors such as accelerated process of technological innovation or energy and environmental policies. These findings suggest that the effectively managed tourism and hospitality sector in Korea has resulted in both economic growth and a reduction in CO2 emissions.