• 제목/요약/키워드: equivalent strength

검색결과 876건 처리시간 0.03초

운동중재에 관한 국내 간호학 논문 분석 (The Analysis of Exercise Therapy in Nursing Research)

  • 전점이
    • 대한간호학회지
    • /
    • 제30권2호
    • /
    • pp.319-330
    • /
    • 2000
  • This study is aimed at analyzing the trend of research on the use of exercise in nursing research, through suggesting directions for future research and implementation of the various exercise therapies. Research studies were taken from dissertations and theses selected from the Academic Society Journals of nursing science, Journals from universities, medical and nursing schools, research institutes in various universities, the Central Journal of Medicine, and the New Medical Journal. The research published between 1970 and 1997 in Korea were analyzed, 51 research were selected. The research are analyzed according to: published time, source of the research, research design, subjects, sample size, dependant variables, exercise therapy, and effect of exercise therapy. The results were as follows: 1. Research on exercise therapy increased rapidly in the 1990's. At this time, 88.2% of research was published. 2. Research areas included: 54.9% non- degree research, 27.5% Doctoral theses, and 17.6% Master's theses. 3. The experimental design included: 66.7% non- equivalent control group pre-test/ post-test design and 29.4% one group pre-test/post- test design. 4. Out of the Subjects: 52.9% were patients with various health problems, and 47.1% were healthy individuals. 5. Sample size included: 52.9% with above 31 subjects, 11.8% with 11~15 and 26~30. 6. Exercise therapy was analyzed by type, intensity, frequency, duration, and period. 1) The Types: Aerobic exercise at 60.8% was the most common, active exercise for muscle strengthening and building made up 21.6%. 2) Exercise with 40~65% intensity comprised 25.5%, 70~85% with 7.8%, and no description of the intensity was 66.7%. 3) Frequency of 3~5 per week was the most common at 78.4%. 4) Duration: 15~60 minutes was the most common length of time at 76.5%. 5) Periods: More than 5 weeks at 82.3% were the most common in their categories. 7. Dependant variables: Psychological response was measured as a dependant variable in 92.2%, Cardio-pulmonary function 88.2%, Body Composition was 86.3%, Physical Response was 60.8%, Lipid Metabolism was 58.8%, Physical Strength was 49.0%, Glucose Metabolism was 25.5%, Activities of Daily Living was 17.6% and others added to be 3.9%. 8. The effect of Exercise Therapy was categorized into 'positive', 'partially positive', and 'no effect' according to dependant variables: Having a positive effect - Glucose Metabolism (93.3%), Physical Response (85.0%), Activities of Daily Living (81.8%), Psychological Response (71.6%), Lipid Metabolism (67.6%), Cardio- pulmonary Function (63.6%), Physical Strength (68.1%), and Body Composition (56.4%). The following suggestions can be made on the above findings: 1. Research findings on Exercise Therapy as a Nursing Intervention need to be described by their elements of type, intensity, frequency, duration and period. 2. Toproperly study the positive effects of Exercise Therapy, there needs to be ⑴ appropriate research design, ⑵ selection criteria for the subjects ⑶ contents of exercise prescription to individuals or groups ⑷ measurement criterion for the dependent variables. 3. Meta-analysis on exercise therapy also needs to be done to analyze and integrate the various results.

  • PDF

MC-50 싸이클로트론을 이용한 위성용 열조절 유기복합재료의 우주환경 영향 연구 (RESEARCH ON SPACE ENVIRONMENTAL EFFECT OF ORGANIC COMPOSITE MATERIALS FOR THERMAL MANAGEMENT OF SATELLITES USING MC-50 CYCLOTRON)

  • 김대원;김동일;허용학;양태건;이호영;김용협
    • Journal of Astronomy and Space Sciences
    • /
    • 제22권4호
    • /
    • pp.441-450
    • /
    • 2005
  • 유기재료(organic material)는 위성이나 우주비행체의 열을 조절하고 우주환경에 직접 노출되는 것을 차단하기 위하여 가장 흔하게 사용되는 재료 중 하나이다. 본 논문에서는 지상설비를 이용하여 모사한 우주환경에서 유기재료의 물성변화를 관찰하였다. 대표적인 위성용 유기 열조절 재료 중 하나인 2mil ITO(Indium Tin Oxide) coated aluminized KAPTON을 실험 대상으로 선택하였다. 양성자에 의한 단일 우주환경효과를 실험하기 위하여, 한국 원자력의학원의 MC-50 싸이클로트론(cyclotron)을 이용하여 양성자를 조사(irradiation)하였으며, 조사조건은 지구궤도 주변 최고의 양성자 발생기록인 1972년 8월의 최고치 상황을 적용하였다. 조사에너지는 평균 관측에너지인 30MeV으로 고정하였으며, 등가 조사량은 우주노출 시간 1년, 3년, 5년 및 10년을 기준으로 설정하였다. 분석과정은 인장강도를 측정하여 정량적 물성저하를 확인하였고, 전계방출 전자주사현미경 등으로 결정성변화와 노출표면의 손상을 분석하였다.

합판용 접착제의 충전제로서 폐기 골분의 이용 (Utilization of Waste Bone Powders as Adhesive Fillers for Plywood)

  • 고재호;노정관
    • Journal of the Korean Wood Science and Technology
    • /
    • 제43권4호
    • /
    • pp.528-537
    • /
    • 2015
  • 폐기물의 재활용을 도모하기 위해 음식점이나 정육점에서 폐기되는 뼈(골분)를 합판용 접착제의 충전제로서 이용 가능성을 검토하였다. 현재 업계에서 합판의 제조에 사용되고 있는 3종의 접착제(UMF, UF 및 PF수지)에 대해 3종의 골분(소골분, 돼지골분 및 조개골분)을 첨가하여 제조한 라티에타파인 합판의 접착성능을 기존의 소맥분과 비교하였다. 3수지에서 모두 소맥분을 전부 소골분, 돼지골분 및 조개골분으로 각각 대체한 합판의 접착성능은 상태나 습윤 강도 및 목파율 모두 소맥분 첨가 합판보다 낮았다. 따라서 소맥분을 전혀 첨가하지 않고 골분으로 모두 대체하는 것은 곤란하였다. 그러나, 소맥분의 절반을 소골분과 돼지골분으로 각각 대체하여 제조한 합판의 성능은 소맥분을 사용한 합판과 거의 동등하거나 오히려 우수한 내수성능을 발휘하여 소맥분과 병용해서 사용하면 충분히 이용이 가능할 것으로 생각된다. 소맥분과 병용한 경우, 3종의 골분 중에는 조개골분을 첨가하여 제조한 합판 보다는 소골분과 돼지골분을 첨가한 합판의 성능이 우수하였으며, 소골분과 돼지골분 간에는 큰 차이가 없었다.

접착제의 구조물성과 접착특성 (Structure/Property of Adhesives and Adhesion Performance)

  • Hiroshi Mizumachi
    • 펄프종이기술
    • /
    • 제29권1호
    • /
    • pp.73-83
    • /
    • 1997
  • Most of the materials used in various industrial fields and also in our daily life are multi-component materials or composite materials, and it is well known that there are many cases where adhesion between the constituents within the bonded systems plays an important role. There are various types of performance evaluation tests for the bonded materials, among which tests for evaluating the bond performance under various conditions may be regarded as the most interesting ones for those engaged in work related to adhesion. I have studied on the mechanism of adhesion form the rheological standpoint with my colleagues, including some students from Korea, and I am very happy to be able to have a talk on some of our research works. In Japan, the so-called "adhesives" are usually classified into two categories;adhesives and pressure sensitive adhesives (PSA). Adhesives are the materials which solidify after bonding and are after used as the structural adhesives because the adhesive strength is comparatively strong. On the other hand, the pressure sensitive adhesives never solidify and are used as PSA tapes, labels or decals. About the adhesives, we have examined the dependence of adhesive strength(shear, tensile, peel) upon both temperature and rate of deformation, and found out some empirical rules which are applicable to most of the adhesive systems. We have also developed a simplified theory of adhesion, which is deseribed in terms of mechanical equivalent mode1 and a few failure criteria. Although some of the common rules can be accounted for according to this theory, it must be pointed out that a fracture mechanical approach ms inevitable especially in the region where the meehanical relaxation time of the adhesive is extremely large [W. W. Lim and H. Mizumachi]. About the pressure sensitive adhesives, we have studied on the PSA performance (peel, tack, holding power) as a function of both the viscoelastic properties and surface chemical properties of the materials, and found out some rules, and again we have developed a theory which deseribes the mechanism. And in addition, we have studied on the miscibility between linear polymers and oligomers, because PSA is generally manufactured by blending gums and tackifier resins. Many phase diagrams have been found and some of them have been analyzed on thermodynamic basis, and it became evident that the miscibility is a very important factor in PSA [H. J. Kin and H. Mizumachi]. In this presentation, I want to emphasize the fact that the adhesion performance is closely related to the structure/property of the adhesives.adhesives.

  • PDF

수중 구조물의 보수·보강을 위한 수중 접착제, 에폭시와 섬유복합재의 개발 (Development of Underwater Adhesive, Epoxy, and FRP Composite for Repair and Strengthening of Underwater Structure)

  • 김성배;이나현;남진원;변근주;김장호
    • 콘크리트학회논문집
    • /
    • 제22권2호
    • /
    • pp.149-158
    • /
    • 2010
  • 현재 육상 노출 콘크리트 구조물의 보수 및 보강공법에는 많은 신기술이 개발되었고 연구도 많이 진행되고 있으나, 수중에 존치되어 있는 구조물, 즉 교각, 부두 잔교 및 강관파일과 같이 해수 및 수중에 잠겨 있으며, 지속적인 하중을 받는 콘크리트 및 강재의 보수보강 기술에 대한 연구는 많지 않다. 그러므로 이 연구에서는 해수나 수중에 있는 구조물의 보수 보강 공법에 사용할 수 있는 수중 에폭시를 개발하였고, 이 에폭시 재료와 보강섬유을 이용하여 수중용 FRP 복합재를 개발하였다. 개발된 재료의 성능을 검증하기 위하여 다양한 기초물성에 대한 시험을 수행하였다. 성능시험 결과, 개발된 에폭시는 수중에서도 풀림이 거의 없고 부유물질이 발생하지 않는다. 또한 수중이라는 제약 조건 속에서도 30,000 cps 이상의 높은 점성을 갖기 때문에 우수한 작업성을 보이며, 수중에서도 육상에서와 거의 유사한 2 MPa 이상의 부착성능을 발휘하는 것으로 나타났다. 내화학성 시험 결과에서도 중량변화율은 약 0.5~1.0% 이내로 측정되어 우수한 내염 저항성을 확인하였다.

가속열화 된 CSPE의 경화특성에 미치는 해수 담수 침지의 영향 (Effects of Seawater & Freshwater Soaking on the Cure Properties of Accelerated Thermally Aged CSPE)

  • 신용덕;이정우
    • 전기학회논문지
    • /
    • 제65권5호
    • /
    • pp.819-824
    • /
    • 2016
  • The accelerated thermal aging of CSPE (chlorosulfonated polyethylene) was carried out for 33.64 and 67.27 days at 110[$^{\circ}C$], equivalent to 40 and 80 years of aging at 50[$^{\circ}C$], respectively. These samples were referred to as CSPE-0y, CSPE-40y and CSPE-80y, respectively. As the accelerated thermally aged years of the CSPE increase, the insulation resistance[$\Omega$] at 20[Hz], 500[Hz], and 2[KHz], and the percent elongation [%EL] of the CSPE decrease. However, the dissipation factor($tan{\delta}$) at 20[Hz], 500[Hz], and 2[KHz], the apparent density[$g/cm^3$], the glass transition temperature and the melting temperature of the CSPE were increased. The period of time that the voltage has to be applied until electric breakdown of the CSPE-0y is longer than that of the CSPE-40y, and the CSPE-80y, but the dielectric strength of the CSPE-80y is lower than that of the CSPE-0y and the CSPE-40y. The differential temperatures after the AC and DC voltages are applied to CSPE-0y, CSPE-40y and CSPE-80y are 0.026~0.028[$^{\circ}C$], 0.030~0.042[$^{\circ}C$], 0.018~0.045[$^{\circ}C$], respectively. The variations of temperature for the AC voltage are higher than those for the DC voltage when an AC voltage is applied to CSPE-0y, CSPE-40y and CSPE-80y. It is found that the dielectric loss owing to the dissipation factor[$tan{\delta}$] is related to the electric dipole conduction current. It is ascertained that the ionic (electron or hole) leakage current is increased by the separation of the branch chain of CSPE polymer from the main chain of the polyethylene as a result of thermal stress due to accelerated thermal aging as well as by conducting ions such as $Na^+$, $Cl^-$, $Mg^{2+}$, $SO_4^{2-}$, $Ca^{2+}$ and $K^+$ after seawater soaking.

굵은입자 시멘트와 광물질 혼화재를 조합 사용하는 콘크리트의 기초적 특성 (A Fundamental Properties of the Concrete Using Coarse Particle Cement and Mineral Admixture)

  • 한천구;장덕배
    • 한국건설순환자원학회논문집
    • /
    • 제5권1호
    • /
    • pp.131-138
    • /
    • 2010
  • 본 연구에서는 보통포틀랜드 시멘트(이하 OPC)제조과정의 분쇄공정 중 밀출구에서 배출되는 비교적 가격이 저렴하면서, 수화열면으로도 효과일 것으로 예상되는 입자분포를 갖는 시멘트(이하 CC)를 대상으로 플라이애시(이하 FA)와 고로슬래그 미분말(이하 BS)를 복합치환하는 3성분계 저발열 시멘트로의 개발 가능성을 검토하기 위하여 유동성, 강도, 간이단열온도 상승량 등 기초적인 특성에 대하여 분석하고자 한다. 실험결과로 유동성은 CC의 치환율이 증가함에 따라 저하하는 경향을 보였고, FA+BS의 치환율이 늘어남에 따라 증가하는 경향을 나타냈다. 공기량은 CC의 치환율이 증가함에 따라 미소하게 감소하는 경향을 나타냈고, FA+BS의 치환율이 증가함에 따라 감소하였다. 응결특성으로 CC 및 FA+BS의 치환율이 증가 할수록 응결 시간은 지연되었다. 간이 단열에 의한 온도 상승량은 전반적으로 CC 치환율이 증가할수록, FA+BS의 치환율이 증가할수록 피크온도는 감소하였고, 이후 온도저하가 완만해 지는 경향을 나타냈다. 압축강도는 CC 및 FA+BS 치환율이 증가할수록 저하하였는데, 재령이 경과함에 따라 장기강도는 Plain과 동등하거나 동등 이상의 강도를 발현 하였다. 종합적으로 CC에 FA+BS를 치환하였을 때 유동성 및 공기량은 저하하는 경향을 나타냈으나, 수화열 면에서 양호한 저감효과를 보여 3성분계 저발열 시멘트로의 개발이 가능성할 것으로 사료된다.

  • PDF

Voronoi 입자기반 개별요소모델을 이용한 암석 균열의 열에 의한 미끄러짐 해석: 국제공동연구 DECOVALEX-2023 Task G(Benchmark simulation) (Voronoi Grain-Based Distinct Element Modeling of Thermally Induced Fracture Slip: DECOVALEX-2023 Task G (Benchmark Simulation))

  • 박정욱;박찬희;이창수
    • 터널과지하공간
    • /
    • 제31권6호
    • /
    • pp.593-609
    • /
    • 2021
  • 본 연구에서는 입자기반 개별요소모델(grain-based distinct element model, GBDEM)을 이용하여 결정질 암석 내 포함된 균열의 열-역학적 거동을 평가할 수 있는 수치해석기법을 제시하고 열에 의한 균열의 미끄러짐 거동을 해석하였다. 이는 DECOVALEX-2023 프로젝트 Task G의 일환으로 수행된 벤치마크 모델링 연구로, Task G는 결정질 암반 내 균열의 열-수리-역학적 복합거동을 해석하기 위한 수치해석기법을 개발하는 데에 목표가 있다. 여기에서는 Voronoi diagram을 이용하여 다면체 개별입자의 집합체로서 해석모델을 생성하고, 입자 및 입자간 접촉에서 발생하는 열-역학적 거동을 개별요소프로그램인 3DEC을 통해 해석하였다. 암석 시험편의 탄성거동을 재현하기 위하여 등가연속체 개념을 적용하여 입자와 접촉의 미시물성을 산정하였으며, 균열에 상응하는 접촉에는 Coulomb slip model을 부여하여 인장강도와 전단강도를 갖는 불연속면을 모사하였다. 경계응력과 열응력에 의한 균열의 거동을 수치적으로 모델링하였으며, 경계조건에 따라 균열의 미끄러짐이 발생하는 열-역학적 메커니즘을 정량적으로 분석하였다. 해석 결과, 본 연구에서 제시한 해석모델이 암석 내 열팽창과 열응력의 증가, 균열 응력과 변위, 경계조건의 영향 등을 합리적으로 재현하고 있음을 확인하였다. 본 연구의 해석모델은 Task G에 참여하는 국외 연구팀들과의 의견 교류와 워크숍을 통해 지속적으로 개선하는 한편, 향후 실내실험에 적용하여 타당성을 검증할 예정이다.

커터수명지수 예측을 위한 다중선형회귀분석과 트리 기반 머신러닝 기법 적용 (Application of Multiple Linear Regression Analysis and Tree-Based Machine Learning Techniques for Cutter Life Index(CLI) Prediction)

  • 홍주표;고태영
    • 터널과지하공간
    • /
    • 제33권6호
    • /
    • pp.594-609
    • /
    • 2023
  • TBM 공법은 굴착면 안정성 확보 및 주변환경에 비치는 영향을 최소화하기 때문에 도심지나 하·해저터널 등에서 적용 사례가 증가하는 추세이다. 디스크 커터의 수명을 예측하는 대표적인 모델 중 NTNU모델은 커터수명지수(Cutter Life Index, CLI)를 주요 매개 변수로 활용하지만 복잡한 시험절차와 시험장비의 희귀성으로 측정에 어려움이 있다. 본 연구에서는 다중선형회귀분석과 트리 기반의 머신러닝 기법으로 암석물성을 활용하여 CLI를 예측하였다. 문헌 조사를 통해 암석의 일축압축강도, 압열인장강도, 등 가석영함량과 세르샤 마모지수 등을 포함한 데이터베이스를 구축하였고 파생변수를 계산하여 추가하였다. 다중선형회귀분석은 통계적 유의성과 다중공선성을 고려하여 입력 변수를 선정하였고 머신러닝 예측 모델은 변수 중요도를 기반으로 입력 변수를 선정하였다. 학습용과 검증용 데이터를 8:2로 나누어 모델 간 예측 성능을 비교한 결과 XGBoost가 최적의 모델로 선정되었다. 본 연구에서 도출된 다중선형회귀모델과 XGBoost모델을 선행 연구와 예측 성능을 비교하여 타당성을 확인하였다.

중금속이 토양용액 중 화학종 변화에 미치는 영향 (Changes of Chemical Species in Soil Solution Induced by Heavy Metals)

  • 양재의;이기원;김정제;임형식
    • 한국환경농학회지
    • /
    • 제14권3호
    • /
    • pp.263-271
    • /
    • 1995
  • 중금속에 의한 토양오염을 화학적으로 평가하기 위한 일환으로 토양을 중금속으로 오염시킨 후 토양용액을 추출하여 pH, 이온강도, 이온농도, 화합물형태 변화를 분석했다. 토양이 Cu와 Cd에 의해 오염될수록 토양용액의 이온강도는 증가했다. 이런 변화는 Cd보다 Cu에 의해 더 컸다. 토양용액 중의 Cu와 Cd의 농도는 가한 양(量)에 비해 소량으로 존재했으나 처리량에 비례하여 금속의 농도는 증가했다. 토양용액 중의 Cd의 농도는 Cu보다 훨씬 높았다. 토양용액 중의 Ca, Mg, K의 농도는 중금속에 의해 증가되었으나 주로 free ion상태로 존재했으며 화합물형태는 Cu나 Cd의 처리에 의해 변화되지 않았다. 토양용액 중 중금속이온의 화합물의 변화 경향은 Cu와 Cd이 달랐다. Cu의 경우 토성과 pH에 의해 영향을 받았는데 pH가 낮은 SiCL 및 SL 토양에서는 free $Cu^{2+}$가 95 molar % 이상으로 주된 화합물형태이었고 pH가 높은 LS토양의 경우 free $Cu^{2+}$과 Cu-hydroxide이 주된 화합물형태로 Cu처리량에 따라 이들 화학종의 molar %는 변화되었다. Cd의 경우 free $Cd^{2+}$과 Cd-chloride 화합물이 주된 화합물형태이었고 Cd처리량이 증가함에 따라 $Cd^{2+}$는 감소한 반면 Cd-chloride 화합물 형성은 증가했다. 중금속에 의한 토양용액의 pH감소, 중금속의 흡착에 따른 양이온의 일시적인 증가, 중금속의 화합물 변화들은 식물영양적 측면에서 볼 때 식물에 불리한 변화로 간주되며, 중금속의 생물유효성과 독성을 평가하는 자료로 활용될 수 있을 것이다.

  • PDF