• 한국전자파학회논문지
• /
• 제17권1호
• /
• pp.52-59
• /
• 2006

개방 단말 동축선 프로브를 사용하여 측정된 PCB 기판과 같은 박막인 유전체의 반사 계수로부터 복소 유전율을 환산하기 위해 모드 해석과 영상 전원을 써서 적분 방정식을 유도하였다. 적분 방정식에 근거한 환산 모델의 정확성은 수치 계산된 반사 계수와 측정을 통해 구한 반사 계수로부터의 복소 유전율 환산으로 확인하였다. 또한 개방 단말 동축선 프로브의 유용한 최대 주파수는 접지판의 크기에 제한 받음을 알 수 있었다.

• 전기학회논문지
• /
• 제58권1호
• /
• pp.119-125
• /
• 2009

This paper deals with the characteristics of soil ionization affecting the dynamic performance of grounding systems under lightning impulse voltage. A concentric hemispherical electrode system was employed in order to facilitate the field calculation and analysis of the experimental results. The parameters such as the ionization threshold and breakdown field intensity, the pre-ionization and the post ionization resistances, the time-lag to ionization, the transient impedance, the equivalent ionized radius for various soil media were measured and analyzed. The dynamic characteristics of ionization processes under lightning impulse voltage are strongly dependent on the types of soil and water content. As a result, a soil ionization reduces the ground resistance and there is a little effect of applied impulse polarity on the soil ionization threshold field intensity. Although the ionization threshold field intensity of wet clay with 30% water content is the highest, its ionized zone was found to be the smallest amongst the test samples.

• Structural Engineering and Mechanics
• /
• 제64권3호
• /
• pp.381-390
• /
• 2017

Present paper deals with the large amplitude flexural vibration of carbon nanotube reinforced composite (CNTRC) plates. Distribution of CNTs as reinforcements may be uniform or functionally graded (FG). The equivalent material properties of the composite media are obtained according to a refined rule of mixtures which contains efficiency parameters. To account for the large deformations, von $K{\acute{a}}rm{\acute{a}}n$ type of geometrical nonlinearity is included into the formulation. The matrix representation of the governing equations is obtained according to the Ritz method where the basic shape functions are written in terms of the Chebyshev polynomials. Time dependency of the problem is eliminated by means of the Galerkin method and the resulting nonlinear eigenvalue problem is solved employing a direct displacement control approach. Results are obtained for completely clamped and completely simply supported plates. Results are first validated for the especial cases of FG-CNTRC and cross-ply laminated plates. Afterwards, parametric studies are given for FG-CNTRC plates with different boundary conditions. It is shown that, nonlinear frequencies are highly dependent to the volume fraction and dispersion profiles of CNTs. Furthermore, mode redistribution is observed in both simply supported and clamped FG-CNTRC plates.

• Journal of the Korean Wood Science and Technology
• /
• 제25권1호
• /
• pp.23-27
• /
• 1997

Alkali-soluble extracts were prepared from barks of Japanese larch(Larix leptolepis). Siberian larch(Larix gmelineii) and Radiata pine(Pinus radiata) The effect of various factors, such as particle size, liquor ratio, extraction temperature, and reaction time, on the extracts yield was investigated. Particle sizes affected the alkali-soluble extracts; the finer the particle size, the higher extracts and extract efficiency. High temperature and high liquor ratio were more effective. In the range of 0.25% to 1% NaOH concentration, alkali extracts were increased with the increasing alkali concentration. However, extract yields were leveled off above 0.5% alkali concentration. Extractions with NaHCO3 were almost equivalent to those of NaOH extraction. 1% NaOH and 1% NaHCO3 resulted in the highest yields of alkaline extracts. Extracts from Japanese larch were lower than those from Siberian larch and Radiata pine barks. Siberian larch bark was the best raw material for tannin adhesives, because its extractive yield was higher than those of the other barks. Concerning pH of alkaline media during extraction, small increases of the extract yields were resulted at range of pH 7 to pH 9, while a large increases from pH 9.0 to pH 12. This phenomenon is attributed to higher alkalinity.

• Bulletin of the Korean Chemical Society
• /
• 제28권9호
• /
• pp.1523-1530
• /
• 2007

The first reduction peak of the cyclic voltammogram (CV) for sulfur reduction in dimethyl sulfoxide has been studied using time resolved Fourier transform electrochemical impedance spectroscopic (FTEIS) analysis of small potential step chronoamperometric currents. The FTEIS analysis results reveal that the impedance signals obtained during short potential steps can be resolved into electron transfer reactions of two different time constants in a high frequency region. The FTEIS method provides snap shots of impedance profiles during an earlier phase of the reaction, leading to time resolved EIS measurements. Our results obtained by the FTEIS analysis are consistent with a series of electron transfer and chemical equilibrium steps of a complex reaction, making up an ECE (electrochemical-chemical-electrochemical) mechanism postulated from the results of computer simulation.

• 전기화학회지
• /
• 제8권3호
• /
• pp.117-124
• /
• 2005

Electrochemical oxidation of ethanol at nickel electrodes has been studied in 1 M KOH solution containing 0.20M ethanol using electrochemical impedance spectroscopy. Equivalent circuits have been worked out by simulating the impedance data, and the results were used to model the oxidation of ethanol as well as the passivation of the electrode. The maximum rate of oxidation of $Ni(OH)_2$ to NiOOH was observed at about 0.37V vs. Ag/AgCl reference electrode, while the maximum rate of ethanol oxidation at the Ni electrode was observed at about 0.42V, The charge-transfer resistance for oxidation of the electrode itself became smaller in the presence of ethanol than in its absence. These results suggest that the $\beta-Ni(OH)_2/\beta-NiOOH$ redox couple is acting as an effective electron transfer mediator far ethanol oxidation. The kinetic parameters also were obtained by the experimental and simulated results.

• 방송공학회논문지
• /
• 제15권1호
• /
• pp.89-98
• /
• 2010

본 논문에서는 FM 방송 링크용 M/W 시스템의 주파수 재배치 시 동등 수준의 전송 품질이 유지되기 위한 기술적 분석 방법론을 제안한다. 실제 각 주파수 대역에서 동작하는 M/W 중계 장치에 대한 수치 계산을 하였으며, 그 결과를 페이드 마진으로 표현된 링크 가용율로 평가하였다. 1700 MHz 대역에서 2.6 dB 이상의 상대적 페이드 마진이 확보가 되면 주파수 재배치 후에도 동일한 품질을 얻을 수 있음을 보였다. 제안된 방법은 M/W 장치의 주파수 재배치에 관한 서비스 품질 평가에 크게 활용될 것으로 여겨진다.

• 방송공학회논문지
• /
• 제23권2호
• /
• pp.186-196
• /
• 2018

본 논문에서는 객체를 추적하기 위해 합성곱 신경망 모델을 이용한 온라인 추적 기법을 제안한다. 오프라인에 모델을 학습시키기 위해서는 많은 수의 훈련 샘플이 필요하다. 이러한 문제를 해결하기 위해, 학습되지 않은 모델을 사용하고, 실험 영상으로부터 직접 훈련 샘플을 수집하여 모델을 갱신한다. 기존의 방법들은 많은 훈련 샘플을 획득하여 모델의 학습에 사용하였지만, 본 논문에서는 적은 수의 훈련 샘플만으로도 객체의 추적이 가능함을 증명한다. 또한 컬러 정보를 활용하여 새로운 손실 함수를 정의하였고 이로부터 잘못 수집된 훈련 샘플로 인해 모델이 잘못된 방향으로 학습되는 문제를 방지한다. 실험을 통해 4가지 비교 방법과 동등하거나 개선된 추적 성능을 보임을 증명하였다.

• 한국산업융합학회 논문집
• /
• 제24권5호
• /
• pp.573-579
• /
• 2021

In this study, flow analysis was performed on three types of strainers for ships with different flow rates to predict the pressure drop of the strainer due to the filter of strainer. In the case of flow analysis, the flow analysis was performed by applying the porous media method by applying the resistance value derived by Ergun's equation to the filter position. As a result of the analysis, it was found that when the dimensions of the strainer body were small, the influence of the flow rate on the pressure drop was large. In addition, the amount of pressure drop and the flow rate are almost linearly proportional, and an analysis formula that can predict the amount of pressure drop was derived. In order to predict the amount of pressure drop of the strainer when blockage exist in the strainer filter, the analysis was performed by introducing the resistance ratio to derive the prediction equation. Using this equation, it is thought that it will be possible to predict the performance of the strainer due to blockage in the future strainer design and field application.

• 한국항행학회논문지
• /
• 제24권6호
• /
• pp.549-556
• /
• 2020

이 논문에서는 마코프 프로세스로 모델링되는 전송 오류나 전송 지연이 있는 네트워크 제어 시스템을 위한 제어기 설계 방법들을 제안한다. 마코프 지연을 갖는 제어 시스템을 위한 안정화 조건을 지연 의존적인 리아프노프-크라소프스키 범함수가 증가된 제어 시스템의 리아프노프 함수와 동일한 형태를 갖는다는 점을 이용하여 찾는다. 유도된 안정화 조건으로부터 복잡도를 줄이기 위한 수 개의 제어 설계기 방법을 제안한다. 모의 실험을 통하여 제안된 방법 중 행렬 변수의 탐색 공간을 블록 대각 행렬로 제한하는 제한 부분 공간 방법이 성능과 복잡도 사이에서 가장 좋은 트레이드오프를 제공함을 확인되었다.