• 한국음향학회지
• /
• 제37권4호
• /
• pp.181-187
• /
• 2018

본 논문은 원형 단면 임피던스 튜브내에 고정된 미세천공 탄성판의 흡음을 해석적으로 구하는 방법을 다루었다. 판의 진동과 덕트 내부 음장을 모드 함수의 무한 급수의 합으로 전개하였는데 반경방향으로는 Bessel 함수를 포함한다. 평면파 가정하에서 저주파수 대역의 근사식을 판의 처음 몇 개의 모드만 고려하여 흡음율을 유도하였으며 등가 임피던스를 갖는 단일 표면의 형태로 제시하였다. 본 논문에서 제안한 공식과 FEM(Finite Element Method)을 이용한 결과는 잘 일치 하였는데 탄성의 효과는 판의 고유진동수에 해당하는 골 또는 피크의 형태로 나타난다. 천공율이 매우 작으면 진동의 영향이 지배적이나 천공율이 어느 한계이상 되면 박판의 탄성거동은 매우 작게 나타나고 강체 MPP(Micro-Perforated Plate)의 흡음 특성이 지배적이 된다.

• 센서학회지
• /
• 제29권1호
• /
• pp.33-39
• /
• 2020

Typically, photoacoustic images are obtained in water or gelatin because the impedance of these mediums is similar to that of the human body. However, these acoustic mediums can have an additional mass effect that changes the resonance frequency of the transducer. The acoustic radiation impedance in air is negligible because it is very small compared to that of the transducer. However, the high acoustic impedance of mediums such as the human body and water is quite large compared to that of air, making it difficult to ignore. Specifically, in a case where the equivalent mass is very small, such as with a micro-machined ultrasound transducer, the additional mass effects of the acoustic medium should be considered for an accurate resonance frequency design. In this study, a piezoelectric micro-machined ultrasonic transducer (pMUT) was designed to have a resonance frequency of 10 MHz in the acoustic medium of water, which has similar impedance as the human body. At that time, the resonance frequency of the pMUT in air was calculated at 15.2 MHz. When measuring the center displacement of the manufactured pMUT using a laser vibrometer, the resonance frequencies were measured as 14.3-15.1 MHz, which is consistent with the finite element method (FEM) simulation results. Finally, photoacoustic images of human hair samples were successfully obtained using the fabricated pMUT.

• Composites Research
• /
• 제13권6호
• /
• pp.47-54
• /
• 2000

복합재 구조물의 저속충격탐지 방법 중의 하나는 고분자 압전센서를 이용하는 것이다. 본 논문에서는 저속충격을 받는 복합재 평판에 대한 충격력과 부착된 스트레인 게이지, 고분자 압전센서 신호와의 관계를 유도하였다. 압전센서의 등가회로도를 통해서 고분자 압전센서의 개회로 신호와 폐회로 신호와의 관계를 유도하여 전하증폭기를 사용하지 않은 고분자 압전센서 신호를 이용하여 복합재 평판의 충격력 복원 가능성에 대한 연구로 확장하였다. 진동실험을 통하여 얻은 복합재 평판의 고유진동수와 감쇠비를 이용하여 해석적인 모델을 수정하여 정방향 문제와 역방향 문제에 있어서 오차를 줄일 수 있었다. 복원된 충격력과 해석적인 센서 신호는 실제 저속 충격 실험을 통하여 측정한 충격력, 스트레인 게이지 신호, 그리고 고분자 압전센서 신호와 잘 일치하였다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제24권3호
• /
• pp.344-350
• /
• 2011

Kura clover (Trifolium ambiguum M. Bieb.) is a potentially useful perennial legume because of its excellent nutritive value and persistence under environmental extremes. However, information about forage quality of kura clover - grass mixtures adapted to the North-Central USA is limited. Objectives of this research were to determine forage nutritional value of kura clover-grass mixtures under different harvest frequency and cutting height regimes. 'Rhizo' kura clover was grown alone and in binary mixtures with 'Park' Kentucky bluegrass (Poa pratensis L.), 'Comet' orchardgrass (Dactylis glomerata L.), and 'Badger' smooth bromegrass (Bromus inermis Leyss.) at the Arlington Agricultural Research Station located near Madison, WI. Three harvest frequencies ($3{\times}$, $4{\times}$, or $5{\times}$ annually) and two cutting heights (4- or 10-cm) were imposed on each binary mixture and on kura clover grown alone. Higher nutritive value was observed in the binary mixtures with more frequent harvest and lower cutting height. Averaged over 3 years and all harvest frequency and cutting height treatments, the nutritive value of the Kentucky bluegrass and smooth bromegrass mixtures was superior to that of the orchardgrass mixture ($410\;g\;kg^{-1}$ NDF and $194\;g\;kg^{-1}$ CP in the Kentucky bluegrass mixture; $405\;g\;kg^{-1}$ NDF and $188\;g\;kg^{-1}$ CP in the smooth bromegrass mixture; $435\;g\;kg^{-1}$ NDF and $175\;g\;kg^{-1}$ CP in the orchardgrass mixture). All of the mixtures and harvest management systems evaluated in this study produced forage with quality equivalent to "grade one" alfalfa hay and suitable for highproducing livestock, even though the highest quality was observed in the Kentucky bluegrass mixture with $5{\times}$ harvesting at the shorter cutting height.

• 한국산학기술학회논문지
• /
• 제9권2호
• /
• pp.333-338
• /
• 2008

본 논문에서는 유효한 DC 전압을 얻기 위해 요구되는 최소입력전압이 충분히 낮으면서도 소비전력이 기존의 정류기 보다 낮은 새로운 NMOS 전류미러형 브리지 정류기를 제안하였다. 설계된 정류기는 13.56 MHz의 HF (for ISO 18000-3)부터 915 MHz의 UHF (for ISO 18000-6) 및 2.45 GHz의 마이크로파 대역 (for ISO 18000-4)까지의 전 주파수 범위에 대해 RFID Transponder에 내장된 마이크로 칩을 구동하기에 충분히 높고 잘 정류된 직류전압을 공급할 수 있다. 제안된 NMOS 정류기의 출력특성은 고주파 등가회로를 이용하여 해석하였으며, 동작 주파수 종가에 따른 게이트 누설전류를 효과적으로 감소시킬 수 있는 회로적 방법을 이론적으로 제시하였다. 이러한 방법을 사용하여 설계된 NMOS 전류미러형 브리지 정류기는 3V 피크-투-피크 입력전압과 $45\;K{\Omega}$ 부하저항에서 $100\;{\mu}W$의 소비전력 특성과 2.13V의 DC 출력전압이 구해졌다. 제안된 NMOS 전류미러형 브리지 정류기는 기존의 정류기에 비해 UHF 및 마이크로파 대역에서도 안정적으로 동작하며, 보다 우수한 특성들을 보였다.

• 한국전자파학회논문지
• /
• 제11권6호
• /
• pp.976-983
• /
• 2000

본 논문은 MRI용 RF 코일로 널리 사용되고 있는 Birdcage type의 RF 코일을 FDTD 방법을 이용해서 해석, 설계하였다. 기존의 저자장(1T, 1.5T) MRI용 RF 코일의 해석 방법은 코일의 공진 주파수를 얻기 위해서 LC 등가 회로를 사용하였으며 코일 내부의 필드 분포를 얻기 위하여 Biot-Savart 법칙을 이용한 방법이 널리 사용되어 왔다. 그러나 3T이상의 고주파에서 동작하는 RF 코일의 해석에는 위의 방법이 커다란 오차를 일으킬 수 있다. 따라서 본 논문에서는 고주파 해석이 가능한 전파 (Full Wave) 해석 방법인 FDTD 방법을 이용하여 3T MRI용 RF 코일을 해석하고 설계하였다. 또한 FDTD 방법을 이용하여 본 논문에서 실제 제작된 Birdcage type과 Spiral type RF 코일에 적용하여 이 방법의 타당성을 실험적으로 검증하였으며 Spiral type의 RF 코일이 B1 field 균일도면에서 Highpass Birdcage type보다 우수함을 수치 해석적으로 검증하였다.

• 대한조선학회지
• /
• 제17권2호
• /
• pp.11-16
• /
• 1980

For vibration analysis of stiffened plates the orthotropic plate analogy is commonly accepted. As to stiffened plates in contact with water, however, there is still much uncertainty in estimation of the added mass because of the lack of direct methods. The authors, considering that for added mass of plates there are many reliable data derived theoretically or experimentally available, suggest a method to estimate the added mass of a stiffened plate by combining the mass increase factor, $\beta$, of an equivalent orthotropic plate and the correction factor, $\kappa$, for the effects of stiffeners. The latter is to be derived from systematic experimental investigations. Then, the natural frequency in water, f', can be calculated from that in air, f, by the equation $f'=f/\sqrt{1+\kappa\beta}$. To investigate practical applicability of this method, a systematic experiment was carried out with five uniaxially stiffened plates. Each of them had a plate of same size, $600mm{\times}600mm{\times}3.2mm$, but stiffeners of different size in the web-depth, 41.6mm, 51.2mm or 66.8mm and of different spacing 75mm, 100mm, or 150mm. Natural frequencies were measured under simply supported-edge conditions in both air and water, and corresponding $\kappa$ values derived. In spite of wide variations of web-depth and spcae of stiffeners, the experimental results show that the diversity of $\kappa$ values is not remarkable; mean values of $\kappa$ are 1.31 with standard deviation of 0.025 for the first modes and 1.27 with that 0.077 for the second modes. Hence, the authors concluded that the above $\kappa$ values can be used generally for the cases of uniaxially stiffened plates both sides of which contact with water, and that $\kappa$ values of general use for the cases of cross-stiffened plates may also be obtainable from similar experiments.

• 임상간호연구
• /
• 제19권3호
• /
• pp.383-394
• /
• 2013

Purpose: This study was conducted to investigate the effects of preparatory nursing information and information offering by SMS on anxiety and nursing satisfaction among family members of ICU (Intensive Care Unit) inpatients. It utilized a quasi-experimental research design with a non-equivalent and non-synchronized control group. Methods: The experimental group and the control group were offered a booklet guiding ICU and were offered face-to-face information by nurses using Power Point. The experimental group was additionally offered SMS (short message service) message on patient's safety at night every morning during the hospital stay between 8 and 9 am. All participants in the experimental group and the control group were measured in reference to anxiety at the point of hospitalization and were surveyed anxiety and nursing satisfaction on the third day of hospital stay. Results: The anxiety demonstrated no significant difference between the groups, while the nursing satisfaction was significantly higher in the experimental group than that of the control group. Conclusion: Proving direct information and indirect information via SMS message were considered effective in improving the family member's satisfaction with nursing care. The frequencies of SMS message and the contents of the message and information need to be defined and specified in the given population.

• 대한전자공학회논문지TC
• /
• 제45권8호
• /
• pp.114-120
• /
• 2008

본 논문에서는 단락 개방 Calibration (SOC) 방법을 이용하여 MIM 구조로 구성된 커패시터의 기생 소자 값들을 추출하였다. Strip line 으로 구성된 short, open, MIM 구조들의 산란 파라미터 행렬들은 전자기 시뮬레이터 및 벡터 네트웍 분석기를 이용하여 측정되었다. 전자기 시뮬레이션들은 3차원 구조 해석에 적합해왔던 유한 유소법 (FEM)을 이용하여 수행되었다. 적층 구조 내부에 형성된 MIM 커패시터의 전자기 영향들은 집중 소자들로 구성된 II 형 등가 회로로 제안되었고, 2 포트 네트웍 해석을 수행함으로써, 측정된 산란 파라미터들과 등가회로 소자들 간의 관계를 보였다. 제안된 SOC 방법을 이용하여 추출된 집중 소자들은 주파수 독립적인 결과를 나타낸다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.1
• /
• pp.179-184
• /
• 2006

Rapid and high-precision positioning with a Global Navigation Satellite System (GNSS) is feasible only when very precise carrier-phase observations can be used. There are two kinds of mathematical models for ambiguity resolution. The first one is based on both pseudorange and carrier phase measurements, and the observation equations are of full rank. The second one is only based on carrier phase measurement, which is a rank-defect model. Though the former is more commonly used, the latter has its own advantage, that is, ambiguity resolution will be freed from the effects of pseudorange multipath. Galileo will be operational. One of the important differences between Galileo and current GPS is that Galileo will provide signals in four frequency bands. With more carrier-phase data available, frequency combinations with long equivalent wavelength can be formed, so Galileo will provide more opportunities for fast and reliable ambiguity resolution than current GPS. This paper tries to investigate phase only fast ambiguity resolution performance with four Galileo frequencies for short baseline. Cascading Ambiguity Resolution (CAR) method with selected optimal frequency combinations and LAMBDA method are used and compared. To validate the resolution, two tests are used and compared. The first one is a ratio test. The second one is lower bound success-rate test. The simulation test results show that, with LAMBDA method, whether with ratio test or lower bound success rate validation criteria, ambiguity can be fixed in several seconds, 8 seconds at most even when 1 sigma of carrier phase noise is 12 mm. While with CAR method, at least about half minute is required even when 1 sigma of carrier phase noise is 3 mm. It shows that LAMBDA method performs obviously better than CAR method.