• The Transactions of the Korean Institute of Power Electronics
• /
• v.19 no.6
• /
• pp.549-556
• /
• 2014

This study proposes a parallel operation strategy for small wind turbine systems. A small wind turbine system consists of blade, permanent magnet synchronous generator, three-phase diode rectifier, DC/DC buck converter, and the battery load. This configuration has reliability, simple control algorithm, high efficiency, and low cost. In spite of these advantages, the system stops when unexpected failures occur. Possible failures can be divided into mechanical and electrical parts. The proposed strategy focuses on the failure of electrical parts, which is verified by numerical analysis through equivalent circuit and acquired general formula of small wind power generation systems. Simulation and experimental results prove its efficiency and usefulness.

• Proceedings of the KIEE Conference
• /
• 1999.11b
• /
• pp.49-51
• /
• 1999

The direct thrust control of permanent magnet linear synchronous motor using digital signal processor (DSP) is presented. The motor self inductance, the initial flux linkage by the permanent magnet is calculated in advance by the finite element analysis. The equivalent circuit method and the digital signal processor are used for the simulation and experiment, respectively. The simulation and experimental results such as, thrust, current and speed responses to the commands are examined.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.279-280
• /
• 2006

This paper analysised Oil-Mist-Detector applied Capacitance Sensor which protects Diesel engine & human from explosion by detecting density of oil mist distribution. Assuming that distance between oil mists is same, Capacitance sensor plates & all oil mists could be analogized to capacitors. From equivalent circuit of Oil-Mist-Detector, variation of Capacitance which is related to Oil Mist's diameter & density of oil mist distribution is obtainable.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.2
• /
• pp.247-254
• /
• 2003

The paper presents the influence of spring dynamics and friction on dynamic responses in a spring-driven cam system. The characteristics of the friction on the camshaft are analyzed using the nonlinear pendulum experiment while the parameters of the friction model are estimated using the optimization technique. The analysis reveals that the friction of the camshaft depends on stick-slip, Stribeck effect and viscous damping. Spring elements are found to have much influence on the dynamic characteristics. Hence, they are modeled as four-degree-of-freedom lumped masses with equivalent springs. The appropriateness of the derived friction model and spring model is verified by its application to a vacuum circuit breaker mechanism of the cam-follower type.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.139.1-139.1
• /
• 2011

Electric vehicle use independent electricity of high voltage. if isolation of electricity is destructed, devices and people are considerably damaged. Therefore, detection of ground fault is necessary for electric vehicle. As the existing detection method of ground fault can not detect ground fault when isolation of both positive side and negative side of electricity is destructed, and change of voltage of electricity. This paper proposed detection method for ground fault of both two sides of electricity and change of voltage. The proposed method is verified by analysis of equivalent circuit.

• 전기의세계
• /
• v.25 no.4
• /
• pp.68-72
• /
• 1976

This study is initiated to solve the problem that the development of an electric machine to drive heavy horse-power load required in the rural district, where only single phase supply is available, is very urgent. As a method for this purpose, the single/three phase converter by single phase induction machine with a tapped auxiliary winding, running unloaded mechanically under single-phase source and supplying three-phase output to a loaded 3-phase induction motor, is devised and the pilot machine is put into test. Analysis based on hybrid equivalent circuit for the phase converter and symmertical component theory for the 3-phase load motor and practical experiment result in that optimum auxiliary winding ratio is to be 1.25 rather than theoretical .root.3/2 in order to keep the voltage unbalance ratio of 3-phase output from the converter as low as possible in both cases of starting and running the load motor.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.50 no.3
• /
• pp.122-129
• /
• 2001

Exact simulation of conducted EMI in switched mode power supplies is proposed. In order to achieve exact simulation, PSPICE active component ABM model and modified transformer model are proposed. Each model parameter is extracted from measurements and data-books. PSPICE simulation results with high frequency PCB pattern model are accordant with EMI measurements for a 50[W] isolated flyback converter. EMI relations of each component and EMI patterns are analyzed.

• Proceedings of the KIEE Conference
• /
• 1999.07e
• /
• pp.2167-2169
• /
• 1999

A pulse transformer producing pulses with the peak power of 200-MW (400 kV 500 A at load side with $4.4{\mu}s$ flat-top) is required to drive the 80-MW pulsed klystron in the PLS linac. We have designed and manufactured the high power pulse transformer with 1 : 17 turn ratio. Its primary functions are to match the impedance of klystron tube to the modulators, and to provide step-up of the voltage. To obtain a fast rise time of the pulse voltage. Low leakage inductance and low distributed capacitance design is very important. In this paper, we discuss the equivalent circuit analysis of the pulse transformer, and present the full power performance test results of pulse transformer.

• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.240-242
• /
• 2018

본 논문은 배터리 등가 회로 모델의 파라미터를 실시간으로 추정 가능한 온라인 업데이트 알고리즘을 비교 분석한다. 온라인 업데이트 알고리즘은 EKF (Extended Kalman Filter)와 RLS (Recursive Least Square)를 기반으로 구성되며 Li-ion 배터리를 이용한 실험 결과를 통하여 각 알고리즘의 연산량, 정확도 등을 분석한다. 분석된 결과를 바탕으로 적용 시스템의 환경과 특성에 따라 적합한 온라인 업데이트 알고리즘을 제안한다.

• Journal of the Korean Chemical Society
• /
• v.39 no.9
• /
• pp.722-727
• /
• 1995

The electrochemical impedance spectra of polyaniline film prepared by cyclic voltammetry have been investigated in 0.1 M aqueous sulfuric acid solution. Charge transfer resistances were rather low at the oxidized states in agreement with the conductive behavior reported at these potentials. The corresponding exchange current densities were very high. Large values of capacitance associated with the polymer have been found which vary as a function of the electrode potentials. An equivalent electrical circuit has been deduced from the impedance data. It was therefore possible to obtain the parameters of the ionic mass transport within the film.