• 제목/요약/키워드: equivalent age

검색결과 335건 처리시간 0.034초

수정 반응률 상수 모델에 의한 콘크리트 압축강도의 예측 (Prediction of Concrete Compressive Strength by a Modified Rate Constant Model)

  • 한상훈;김진근;문영호
    • 콘크리트학회논문집
    • /
    • 제12권2호
    • /
    • pp.31-42
    • /
    • 2000
  • This paper discusses the validity of models predicting the compressive strength of concrete subjected to various temperature histories and the shortcomings of existing rate constant model and apparent activation energy concept. Based on the discussion, a modified rate constant model is proposed. The modified rate constant model, in which apparent activation energy is a nonlinear function of curing temperature and age, accurately estimates the development of the experimental compressive strengths by a few researchers. Also, the apparent activation energy of concrete cured with high temperature decreases rapidly with age, but that of concrete cured with low temperature decreases gradually with age. Finally generalized models to predict apparent activation energy and compressive strength are proposed, which are based on the regression results.

노인 남성의 안굴절 상태에 대한 연구 (A Study of Eye Refraction State on Male Old Age)

  • 유재태;김덕훈
    • 한국안광학회지
    • /
    • 제5권2호
    • /
    • pp.21-25
    • /
    • 2000
  • 노인은 굴절이상에 따라 시력이 감소하면 시생활에 많은 불편함을 격는다. 따라서 본 연구는 노인 남성의 안 굴절상태를 검사하여 시력처방에 정확한 정보를 제공할 수 있다. 검사는 자각적과 타각적인 검사법을 실시하였고, 대상은 55세 이상의 한국인 남성을 대상으로 하였다. 눈의 형태는 정시가 0.8 % 근시가 15.2 %, 원시가 84.0 %로 나타났다. 굴절이상안은 단순 근시성 난시가 1.3 %, 복합 근시성 난시가 13.9 %, 단순 원시가 3.4 %, 단순 원시성 난시가 3.1 % 그리고 혼합 난시가 77.5 %로 각각 나타났다. 난시의 축은 도난시가 62 %, 직난시가 6%, 사난시가 32 %로 나타났다. 전체 근시성 구면도수는 -0.5 diopter 이상에서 -2.0 diopter 미만이 84.3 %, -2.00 diopter 이상에서 -6.00 diopter 미만이 15.7 %로 나타났다. 전체 원시성 구면도수는 +0.5 diopter 이상에서 +2.0 diopter 미만이 74.2 %, +2.00 diopter 이상에서 +6.00 diopter 미만이 24.8 %, +6.00 diopter 이상이 1%로 나타났다. 난시굴절력에서 0.5 diopter 이상에서 1.0 diopter 미만이 54.1 %, 1.0 diopter 이상에서 2.0 diopter 미만이 32.4 %, 2.00 diopter 이상이 13.5 %로 나타났다.

  • PDF

3중 염색체 probe를 이용한 FISH(fluorescence in situ hybridization)기법으로 분석한 정상인의 염색체 이상빈도 (Frequency of Chromosome Aberrations Detected by Fluorescence in Situ Hybridization Using Triple Chromosome-Specific Probes in o Healthy Korean Population)

  • 정해원;김수영;신은희
    • 한국환경성돌연변이발암원학회지
    • /
    • 제18권2호
    • /
    • pp.109-115
    • /
    • 1998
  • Fluorscence in situ hybridization with chromosome-specific probe has been shown to be a valid and rapid method for detection of chromosome rearrangements induced by chemical and physical agents. This method is useful for quantifying structural aberrations, expecially for stable ones, such as translocation and insertion, which are difficult to detect with conventional method in human lymphocyte. In order to use the FISH method as a biodosimeter for monitoring human population exposed to various chemical and physical agent, baseline level of chromosome rearragement was established. Blood from forty four healthy adults were collected and analysed with whole chromosome-specific probes by human chromosome 1,2 and 4. The frequencies of stable translocation were 2.45 per 100 cell equivalent and those of insertion, color juction, acentric and dicentric were 0.32, 3.28, 0.23 and 0.27 per 100 cell equivalent respectively. The frequencies of chromosome rearragements increased with age in both sexes except for dicenrics. From above result, stable aberrations accumulate with age and it may reflect integrated lifetime exposure of adverse environment.

  • PDF

철근콘크리트 벽체의 초기 균열 거동에 대한 연구 (Estimation of Early-Age Cracking of Reinforced Concrete Walls)

  • 곽효경;하수준
    • 한국전산구조공학회:학술대회논문집
    • /
    • 한국전산구조공학회 2006년도 정기 학술대회 논문집
    • /
    • pp.898-905
    • /
    • 2006
  • In the present paper, for a quantitative assessment of early-age cracking in an RC wall, an improved analytical model is proposed. First of all, a three-dimensional finite element model for the analysis of stresses due to hydration heat and differential drying shrinkage is introduced. A discrete steel element derived using the equivalent nodal force concept is used to simulate reinforcing steels, embedded in a concrete matrix. In advance, to quantitatively calculate the cracking potential, an analytical model that can estimate the post-cracking behavior in an RC tension member is proposed Subsequent comparisons. of analytical results with test results verify that the combined use of both the finite element model for the stress analysis as well as the analytical model for the estimation of the post-cracking behavior in an RC tension member make it possible to accurately predict the cracking ,behavior of RC walls.

  • PDF

양생온도변화에 따른 콘크리트의 재료역학적 특성 (Mechanical Properties of Concrete with Different Curing Temperature)

  • 김진근;한상훈;양은익;조명석;우상균
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 1997년도 가을 학술발표회 논문집
    • /
    • pp.117-124
    • /
    • 1997
  • In this study, mechanical properties of type V cement concrete with different curing temperature were investigated. The tests for mechancial properties, i.e., compressive strength and modulus of elasticity, were carried out on two kinds of type V cement concrete mixes. concrete cylinders cured at 10, 23, 35 and 50℃ were tested at 1, 3, 7 and 8 days. The 'rate constant model' was used to described the combined effects of time and temperature on compressive strength development. Test results show that concrete subjected to high temperature at early age attains greater strength than concrete to low temperature but eventually attains lower later-age strength than that. With type V cement concrete, the linear and Arrhenius rate constant models both accurately describe the development of relative strength as afunction of the equivalent age.

  • PDF

철근콘크리트 벽체의 초기재령 거동 해석 (Early-Age Behavior of Base Restrained RC Walls)

  • 곽효경;하수준
    • 한국전산구조공학회:학술대회논문집
    • /
    • 한국전산구조공학회 2003년도 가을 학술발표회 논문집
    • /
    • pp.251-258
    • /
    • 2003
  • The early -age behavior of base restrained reinforced concrete (RC) walls is analyzed using a three-dimensional finite element method in this study. After calculating the temperature and internal relative humidity variations of an RC wall, determination of stresses due to thermal gradients, differential drying shrinkage, and average drying shrinkage is followed, and the relative contribution of these three stress components to the total stress is compared. The mechanical properties of early-age concrete, determined from many experimental studies, are taken into consideration, and a discrete reinforcing steel derived using the equivalent nodal force concept is also used to simulate the cracking behavior of RC walls. In advance, to Predict the crack spacing and maximum crack width in a base restrained RC wall, an analytical model which can simulate the post-cracking behavior of an RC tension member is introduced on the basis of the energy equilibrium before and after cracking of concrete.

  • PDF

퍼지 연등가 비용법을 이용한 선박의 경제적 교체시기 결정 (Determination of Container Ship' s Economical Replacement Policy by Fuzzy Annual Equivalent Cost Method)

  • 장운재;금종수
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2007년도 추계학술대회 및 제23회 정기총회
    • /
    • pp.241-242
    • /
    • 2007
  • 본 연구는 컨테이너 선박의 경제적 교체주기를 퍼지 연등가 비용법을 이용하여 결정하였다. 특히, 선박의 경제수명의 산출을 위한 비용에는 수많은 애매성이 존재하는데 이러한 애매성을 퍼지수로 표현하였다. 또한 퍼지수를 이용한 퍼지 비용모델을 개발하여 기존의 비용모델 보다 현실적으로 분석하는 방법을 제안하였다. 그리고 제안된 퍼지모델을 이용하여 다양한 크기의 컨테이너선을 대상으로 경제적 수명을 결정하였다.

  • PDF

CVM을 이용한 유기양식 김의 비시장적 가치 평가 (Estimation the Non-Market Value of Organic Farmed Laver using the CVM)

  • 정명생;곽인섭;이상고
    • 수산해양교육연구
    • /
    • 제17권3호
    • /
    • pp.383-389
    • /
    • 2005
  • In this study, we analyzed consumers' extra willingness-to-pay for the organic farmed laver, which recently is related to the increased interests in health. Survey questionnaires, which are targeted the urban consumers and based on the equivalent surplus concept, were intended to calculate extra willingness-to-pay for the organic farmed laver. Payment card format was used as the questionnaires type and tobit model was used for the analysis. Variables used for the analysis are sex, age, region, occupation, number in family and income. The results were that the consumers had extra willness-to-pay of 17.16% on average for the eco-friendly organic farmed laver. The higher the income and the more the family number, the customers had more extra willingness-to-pay.

충주문경간(忠州聞慶間)의 옥천계(沃川系)의 층서(層序)와 구조(構造) (Stratigraphy and Tectonics of Okcheon System in the Area between Chungju and Munkyeong)

  • 김옥준
    • 자원환경지질
    • /
    • 제1권1호
    • /
    • pp.35-46
    • /
    • 1968
  • Some of geologists in Korea recently postlated that Okchon system previously known to be precambrian age was the metamorphosed sediments of post-Chosen (Ordovician and pre-Kyeongsang (late Jurassic to Cretaceous) periods, or even definitely of Triassic period simply on the basis of the fact that Okcheon system overlies the Great Limestone series of Chosen system of Camber-ordovician age, and of other few assumptions of minor importance. As a result of such correlation, thick series of metasediments and Okcheon system of unknown age were established in this particular region and vaguely correlated to Paleozoic and Mesozoic sediments. Recent study done by the author reveled that: 1) only the upper Okcheon bed of S. Nakamura was true Okcheon system, and the middle and lower Okcheon beds were excluded, because they were correlated to Cambrian and Permian sediments resfectively, 2) Sangnaeri, Seochangri, and rengam formations of unknown age, and Baekhwasan, Jobong, and Ihwaryeong formations of Okcheon system of also unknown age were the metamorphosed Yangdeok system of Cambrian age, all of these formations were differentiated by the previous workers and were equivalent to the middle Okcheon system of S. Nakamure, and. 3) These metamorphosed Yangdeok system overlaid apparently the Great Limestone series in forms of overthrust and klippe which were produced by the orogeny took place during post-Daedong and pre-Kyeongsang period (probably middle to the Jurassic). The Sobaeksan Range, folded mountain Chains was also formed by this orogeny. Thus, Okcheon system newly defined by the author is precambrain age and consists in ascending order of Kemyenogsan, Hyangsan dolomite, and Daehangsan quartzite formation which were previously classified into metasediments of unknown age, and Munjuri, and Hwangkanri, formations which were differentiated into Okcheon system unknown age by the previous workers, but are of reversed sequence. Myeongori and Bukrori formations of Okcheon System are regard by the author as part of Hwangkanri formation. Few other assumption of minor important taken by the previous workers as their positive evidences are carefully explained that they were misinterpreted.

  • PDF

Biomechanical Properties of the Cornea Using a Dynamic Scheimpflug Analyzer in Healthy Eyes

  • Lee, Hun;Kang, David Sung Yong;Ha, Byoung Jin;Choi, Jin Young;Kim, Eung Kweon;Seo, Kyoung Yul;Kim, Tae-im
    • Yonsei Medical Journal
    • /
    • 제59권9호
    • /
    • pp.1115-1122
    • /
    • 2018
  • Purpose: To investigate biomechanical properties of the cornea using a dynamic Scheimpflug analyzer according to age. Materials and Methods: In this prospective, cross-sectional, observational study, participants underwent ophthalmic investigations including corneal biomechanical properties, keratometric values, intraocular pressure (IOP), and manifest refraction spherical equivalent (MRSE). We determined the relationship of biomechanical parameters and ocular/systemic variables (participant's age, MRSE, IOP, and mean keratometric values) by piecewise regression analysis, association of biomechanical parameters with variables by Spearman's correlation and stepwise multiple regression analyses, and reference intervals (RI) by the bootstrap method. Results: This study included 217 eyes of 118 participants (20-81 years of age). Piecewise regression analysis between Corvis-central corneal thickness (CCT) and participant's age revealed that the optimal cut-off value of age was 45 years. No clear breakpoints were detected between the corneal biomechanical parameters and MRSE, IOP, and mean keratometric values. Corneal velocity, deformation amplitude, radius, maximal concave power, Corvis-CCT, and Corvis-IOP exhibited correlations with IOP, regardless of age (all ages, 20-44 years, and over 44 years). With smaller deformation amplitude and corneal velocity as well as increased CorvisIOP and Corvis-CCT, IOP became significantly increased. We provided the results of determination of confidence interval from RI data using bootstrap method in three separate age groups (all ages, 20-44 years, and over 44 years). Conclusion: We demonstrated multiple corneal biomechanical parameters according to age, and reported that the corneal biomechanical parameters are influenced by IOP.