• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.11
• /
• pp.1721-1728
• /
• 2018

Objective: The use of genetic markers can help to enhance reproduction in cattle, which is a very important trait for profitability in dairy production systems. This study evaluated the association between genotypes of leptin (LEP), toll-like receptor 4 (TLR4), and chemokine receptor of interleukin 8 C-X-C motif (CXCR1) genes and fertility traits in Czech Fleckvieh cattle. Methods: Phenotypic data from 786 Czech Fleckvieh cows raised on 5 farms in the Czech Republic were used, along with information from the 1st three parities. To determine genotype, the polymerase chain reaction-restriction fragment length polymorphism method was used. Results: Except for LEP g.-963C>T, all studied genotype frequencies of single nucleotide polymorphisms (SNPs) were distributed according to the Hardy-Weinberg equilibrium. Two LEP SNPs (g.-963C>T and c.357C>T) were associated with the age at the 1st calving, days open (DO), pregnancy rate after 1st service (PR), and calving interval (CLI). In LEP g.-963C>T the TT genotype heifers firstly calved 24 days earlier than CC genotype and the CT genotype cow showed a tendency for shorter DO and higher PR. In LEP c.357C>T we observed longer CLI and DO period in TT cows. In general, we can propose the TT genotype of g.-963C>T as favorable and the TT genotype of c.357C>T as unfavorable for a cow's fertility. Heterozygotes in TLR4 c.-226C>G were significantly associated with shorter CLI, and presented a nonsignificant tendency to be associated with higher PR. In CXCR1 c.777 C>G, we did not observe any relationship of this SNP with reproduction. Conclusion: Overall, the results showed that LEP could be an effective marker for improving reproduction in Czech Fleckvieh cattle. This study also provides novel insights into the relationship between TLR4 and CXCR1 SNPs and reproduction in dual-purpose cattle.

• Korean Chemical Engineering Research
• /
• v.45 no.5
• /
• pp.460-465
• /
• 2007

Endosulfan-${\alpha}$ endosulfan-${\beta}$ and endosulfan-sulfate, which are classified as pesticides, were degraded by use of UV energy and ultrasonic irradiation. The degradation residuals were analysed by gas chromatography with an electron capture detector and TOC (total oragnic carbon) analysis. The reactions were conducted in a quartz annular reactor equipped with a low pressure mercury multilamp (8Wx2) and a sonic generator. All the aqueous solutions were concentrated as 10 mg/L initially. Endosulfans were degraded each to result in 48.2% (${\alpha}$), 50.0% (${\beta}$) and 76.5% (sulfate) of removal efficiency by UV energy, and 66.9% (${\alpha}$), 55.8% (${\beta}$) and 72.7% (sulfate) by ultrasonic irradiation, respectively. In contrast to the results of the single-component solutions, degradation of the endosulfan-sulfate was greatly suppressed to result in the lowest degradation rate and removal efficiency in the three-component solutions. This finding suggests that there should be a reversible reaction with a substantially low equilibrium constant between endosulfan-${\alpha}$ or -${\beta}$ and -sulfate in the coexistence of the three endosulfans. TOC data showed the endosulfans were decomposed by 20%~40% toward complete mineralization, producing a quantity of intermediates induced by the radical reactions. We found that all the decay reactions considered in this study nicely fell into pseudo first-order rate.

• Resources Recycling
• /
• v.17 no.4
• /
• pp.37-46
• /
• 2008

In view of the increasing importance of the waste recycling to meet the strict environmental regulations, the present investigation reports an adsorption process using cationic exchanger DOWEX G-26 for the recovery of copper from the synthetic sulphate solutions containing copper 0.3 to 0.5 mg/ml, similar to the CMP waste effluent of electronic industry. Various process parameters viz. contact time, solution pH, resin dose, and A/R ratio for elution were investigated to recover copper from the effluents. Complete adsorption of copper from the solution was achieved at equilibrium pH 2.5 and aqueous I resin (A/R) ratio of 100 ml/g in 14 minutes contact time. The adsorption of copper on DOWEX G-26 resin was found to follow the Langmuir isotherm and second order reaction. The copper was eluted from loaded resin with dilute sulphuric acid to produce copper-enriched solution.

• Journal of the Korean Electrochemical Society
• /
• v.4 no.3
• /
• pp.118-124
• /
• 2001

The Langmuir adsorption isotherm of the over-potentially deposited hydrogen (OPD H) for the cathodic $H_2$ evolution reaction (HER) at the $poly-Au|0.5M\;H_2SO_4$ aqueous electrolyte interface has been studied using cyclic voltammetric and ac impedance techniques. The behavior of the phase shift $(0^{\circ}\leq{-\phi}\leq90^{\circ})$ for the optimum intermediate frequency corresponds well to that of the fractional surface coverage $(1\geq{\theta}\geq0)$ at the interface. The phase-shift profile $({-\phi}\;vs.\;E)$ for the optimum intermediate frequency, i.e., the phase-shift method, can be used as a new method to estimate the Langmuir adsorption isotherm $(\theta\;vs.\;E)$ of the OPD H for the cathodic HER at the interface. At the poly-$Au|0.5M\;H_2SO_4$ electrolyte interface, the equilibrium constant (K) and standard free energy $({\Delta}G_{ads})$ of the OPD H are $2.3\times10^{-6}\;and\;32.2\;kJ\;mol^{-1}$, respectively.

• Applied Biological Chemistry
• /
• v.12
• /
• pp.69-74
• /
• 1969

This glucose isomerizing enzyme, which Actinomyces sp. (strain, K-17) produced, was inhibited by citrate, oxalate, ethylene diamine tetraacetic acid and cysteine on the enzyme reaction. This enzyme isomerized xylose to ketose as well as glucose. The Michaelis constant of this enzyme was $7.2X\;10^{-1}M.$. on D-glucose. The enzyme activity of intact cells which were harvested in the none xylose containing medium was very weak. If these intact cells of low activity were treated in the buffered xylose solution, its activity was considerably increased. After fifteen hours at $32^{\circ}C$. on xylose treatment, the enzyme activity was increased to equilibrium and the treating condition was proper at neutral pH and in aerobic state. The adequate concentration of xylose on the treatment was about 0.5 percent.

• Applied Chemistry for Engineering
• /
• v.23 no.5
• /
• pp.433-439
• /
• 2012

In this study, a cationic surfactant BHMAS (N,N-bis-(3'-n-dodecyloxy-2'-hydroxypropyl)-N-methyl-2-hydroxyethylammonium methyl sulfate) having two lauryl and three hydroxyl groups was synthesized by the reaction of n-dodecyl glycidyl ether and 2-aminoethanol followed by the quarternization with dimethyl sulfate. The structure of the product was elucidated by $^{1}H-NMR$ and FT-IR. The CMC (critical micelle concentration) and surface tension of BHMAS at CMC condition were found to be $9.12\;{\times}\;10^{-4}$ mol/L and 28.71 mN/m respectively. Dynamic surface tension measurements using a maximum bubble pressure tensiometer indicated that a relatively long time was required to saturate the interface between air and aqueous surfactant solution. The interfacial tension measured between 1 wt% surfactant solution and n-decane reached an equilibrium value of 0.045 mN/m in 5 min. The adsorption capacity of the synthesized surfactant was observed to be excellent, which suggests that the surfactant can be used as a softening agent during a laundry process.

• Korean Journal of Environmental Agriculture
• /
• v.10 no.1
• /
• pp.11-19
• /
• 1991

This study was carried out to develop the low-priced adsorbent by synthesizing the zeolite of high CEC with the natural zeolite and examining the ability of this zeolite to adsorb heavy metals. The dominant clay minerals were clinoptilolite and mordenite in natural zeolite, while phillipsite in the synthesized zeolite. Adsorption reaction of Cu and Zn on clays were reached to equilibrium after 1 hr. The amount of adsorption was increased as the concentrations of heavy metals or the initial pH of suspension was increased. The synthesized zeolite adsorbed heavy metals about twice as much as the natural zeolite. The adsorption of heavy metals on the synthesized zeolite was less affected by the initial pH of suspension than that on natural zeolite. At cumulative adsorption, the synthesized zeolite adsorbed much more heavy metals at early three treatments than the natural zeolite did. The amount of desorption by chloride salts was increased as the concentration of chloride salts was increased. The ability of salt to desorb was in the order of NaCl>$CaC1_2$>$AlC1_3$. It is estimated that the ability of the synthesized zeolite to remove heavy metals was better than that of the natural zeolite.

• Applied Chemistry for Engineering
• /
• v.2 no.2
• /
• pp.108-118
• /
• 1991

Interactions between pyridine hydrodenitrogenation (HDN) and m-cresol hydrodeoxygenation(HDO), and the kinetic analysis were studied over sulfided $CoMo/{\gamma}-Al_2O_3$ catalyst at the range of temperatures between 473 K and 723 K, the total pressures between $10{\times}10^5Pa$ and $50{\times}10^5Pa$, and the contact times between 0.0125 g-cat. hr/ml-feed and 0.03g-cat. hr/ml-feed. HDN of pyridine and HDO of m-cresol were inhibited by each other and the inhibition effect of HDO by pyridine is higher than that of HDN by m-cresol. But reactivity of m-cresol is higher than that of pyridine. The rate equations of pyridine and m-cresol were given to be ${\gamma}_{HDN}=k_{HDN}{\cdot}K_pC_p/(1+K_cC_c+K_pC_p)$ and ${\gamma}_{HDO}=k_{HDO}{\cdot}K_cC_c/(1+K_cC_c+K_pC_p)$ in terms of Langmuir-Hinshellwood-Hougen-Watson model. At each temperature, reaction rate constants and adsorption equilibrium constants were determined and activation energies of pyridine HDN and m-cresol HDO are 13.83kcal/mol, respectively and the heat of adsorption are -6.458 and -5.045kcal/mol, respectively.

• Korean Chemical Engineering Research
• /
• v.49 no.4
• /
• pp.423-431
• /
• 2011

Recentincreasing awareness of the environmental damage caused by the $CO_2$ emission of fossil fuelsstimulated the interest in alternative and renewable sources of energy. Fuel cell is a representative example of hydrogen energy utilization. In this study, Molten Carbonate Fuel Cell system is simulated by using $Aspen^{TM}$. Stack model is consisted of equilibrium reaction equations using $ACM^{TM}$(Aspen Custom Modeler). Balance of process of fuel cell system is developed in Aspen $Plus^{TM}$ and simulated at steady-state. Analysis of performance of the system is carried out by using sensitivity analysis tool with main operating parameters such as current density, S/C ratio, and fuel utilization and recycle ratio.In Aspen $Dynamics^{TM}$, dynamics of MCFC system is simulated with PID control loops. From the simulation, we proposed operation range which generated maximum power and efficiency in MCFC power plant.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.8
• /
• pp.2419-2424
• /
• 2013

Guanosine-5'-diphosphate 3'-diphosphate (ppGpp) serves as alarmone in bacterial stringent responses. In this study, an affinity column was constructed by immobilizing ppGpp to NHS-Sepharose for isolating ppGpp-binding proteins. A novel ppGpp-binding protein, YjgA, was isolated and characterized by MALDI-TOF MS (matrix-assisted laser desorption ionization-time-of-flight mass spectrometry) coupled with two-dimensional gel electrophoresis. YjgA and truncated forms of YjgA were cloned and over-expressed in BL21 (DE3). The binding affinity of YjgA to ppGpp was determined by equilibrium dialysis. The interaction of YjgA with ppGpp was very specific, considering that the dissociation constant of YjgA with ppGpp was measured as $5.2{\pm}2.0{\mu}M$, while the affinities to GTP and GDP were about 60 and 30 times weaker than ppGpp. Expression of yjgA gene in Escherichia coli K-12 MG1655 was examined by reverse transcription polymerase chain reaction (RT-PCR). RT-PCR results revealed that yjgA was expressed from early to late stationary phase. The yjgA deletion mutant exhibited decreased cell number at stationary phase compared to parent strain and the over-expression of YjgA increased the cell number. These results suggested that YjgA might stimulate cell division under stationary phase. In most prokaryotic genome, about half of the protein candidates are hypothetical, that are expected to be expressed but there is no experimental report on their functions. The approach utilized in this study may serve as an effective mean to probe the functions of hypothetical proteins.