• 한국수산과학회지
• /
• 제30권6호
• /
• pp.936-943
• /
• 1997

Biosorbents of nonliving, dried marine brown algae Undaria pinnatifida, Hizikia fusiformis, and Sargassum fulvellum were investigated for their lead biosorption performances. As the amount of biosorbent added was increased, the lead removal by biosorbent materials increased but the lead biosorption capacities decreased. However the lead biosorption capacity by the biosorbent materials increased with increasing initial lead concentration and pH in the range of $C_o\;10\~500\;mg/L$. Among the biosorbent materials used in this study, the lead biosorption capacity in the solutions with no pH adjustment decreased in the following sequence: U. pinnatifida > H. fusiformis > S. fulvellum. Equilibrium parameters based on Langmuir and Freundlich isotherm were determined. It was found that the lead biosorption by biosorbent materials were expressed by the Langmuir isotherm better than the Freundlich isotherm.

• Environmental Engineering Research
• /
• 제22권1호
• /
• pp.95-107
• /
• 2017

Adsorption equilibrium and kinetic behavior of two toxic heavy metals hexavalent chromium [Cr(VI)] and mercury [Hg(II)] on mustard oil cake (MOC) was studied. Isotherm of total chromium was of concave type (S1 type) suggesting cooperative adsorption. Total chromium adsorption followed BET isotherm model. Isotherm of Hg(II) was of L3 type with monolayer followed by multilayer formation due to blockage of pores of MOC at lower concentration of Hg(II). Combined BET-Langmuir and BET-Freundlich models were appropriate to predict Hg(II) adsorption data on MOC. Boyd's model confirmed that external mass transfer was rate limiting step for both total chromium and Hg(II) adsorptions with average diffusivity of $1.09{\times}10^{-16}$ and $0.97m^2/sec$, respectively. Desorption was more than 60% with Hg(II), but poor with chromium. The optimum pH for adsorptions of total chromium and Hg(II) were 2-3 and 5, respectively. At strong acidic pH, Cr(VI) was adsorbed by ion exchange mechanism and after adsorption reduced to Cr(III) and remained on MOC surface. Hg(II) removal was achieved by complexation of $HgCl_2$ with deprotonated amine ($-NH_2$) and carboxyl (COO-) groups of MOC.

• Carbon letters
• /
• 제28권
• /
• pp.87-95
• /
• 2018

This study examined the influence of operating parameters on the electrosorptive recovery system of lithium ions from aqueous solutions using a spinel-type lithium manganese oxide adsorbent electrode and investigated the electrosorption kinetics and isotherms. The results revealed that the electrosorption data of lithium ions from the lithium containing aqueous solution were well-fitted to the Langmuir isotherm at electrical potentials lower than -0.4 V and to the Freundlich isotherm at electrical potentials higher than -0.4 V. This result may due to the formation of a thicker electrical double layer on the surface of the electrode at higher electrical potentials. The results showed that the electrosorption reached equilibrium within 200 min under an electrical potential of -1.0 V, and the pseudo-second-order kinetic model was correlated with the experimental data. Moreover, the adsorption of lithium ions was dependent on pH and temperature, and the results indicate that higher pH values and lower temperatures are more suitable for the electrosorptive adsorption of lithium ions from aqueous solutions. Thermodynamic results showed that the calculated activation energy of $22.61kJ\;mol^{-1}$ during the electrosorption of lithium ions onto the adsorbent electrode was primarily controlled by a physical adsorption process. The recovery of adsorbed lithium ions from the adsorbent electrode reached the desorption equilibrium within 200 min under reverse electrical potential of 3.5 V.

• 한국지반공학회논문집
• /
• 제26권9호
• /
• pp.37-45
• /
• 2010

본 연구에서는 지하수에 존재하는 비소를 산업 폐기물인 제강 슬래그를 이용하여 제거하고자, 제강 슬래그에 대한 비소의 흡착특성을 규명하였다. 이를 위해 등온흡착 실험과 동적흡착 실험을 수행하였고, 흡착반응 후 용액의 화학적 특성을 분석하였다. 실험 결과, 흡착 실험을 수행한 모든 용액은 염기 상태로 존재하였으며(pH 9이상), 칼슘의 농도가 가장 높았다(30~50mg/L). 등온흡착 실험결과는 Langmuir 모델보다Freundlich 모델에 적용하는 젓이 더 합리적이였으며, 제강 슬래그에 As(V)가 As(III)보다 약 87% 더 많이 흡착되는 것으로 확인됐다. 동적흡착 실험결과의 경우, 유사일차모델보다 유사이차모델을 통해 해석하는 것이 더 적합하였다. 비소의 초기농도가 높을수록 평형 흡착량($q_e$)과 완화시간($t_r$) 이 모두 증가하였으며, As(V)는 As(III)보다 평형 흡착량이 많고 완화시간은 짧은 것을 확인할 수 있었다. 또한, 유사이차모델을 통해 예측된 평형 흡착량이 등온흡착 실험에서 구한 평형 흡착량과 유사해 동적흡착 실험결과로 등온흡착 실험결과를 예측하는 것이 가능함을 확인하였다.

• Korean Chemical Engineering Research
• /
• 제58권1호
• /
• pp.113-121
• /
• 2020

실로퓨트에 대한 Taxus chinensis 유래 7-에피-10-디아세틸파클리탁셀의 흡착을 회분식 실험에서 연구하였다. 흡착 평형 데이터를 Langmuir, Freundlich, Temkin 및 Dubinin-Radushkevich 등온흡착식에 적용한 결과, Langmuir 등온흡착식이 가장 높은 정확도를 나타내었다. 흡착 용량은 온도가 증가함에 따라 감소하였으며, 실로퓨트에 대한 7-에피-10-디아세틸파클리탁셀의 흡착은 적합한 물리적 공정이었다. 흡착 데이터는 유사 이차 동역학 모델과 매우 잘 일치하였으며, 경계층 확산과 입자 내 확산은 흡착 과정에 거의 영향을 미치지 않았다. 실로퓨트에 대한 7-에피-10-디아세틸파클리탁셀 흡착 과정은 발열이며 비자발적이었다. 또한, 등량흡착열은 흡착량에 의존하지 않아 흡착제의 표면 에너지가 균일함을 알 수 있었다.

• Carbon letters
• /
• 제10권1호
• /
• pp.23-32
• /
• 2009

The adsorption of phenolic compound resorcinol on activated carbons prepared from Moringa oleifera (Drumstick bark) has been investigated. Activated carbon was prepared by impregnating Moringa oleifera with 50% phosphoric acid in the ratio of 1:1 and 1:2(w/w), designated as MOAC1 and MOAC2. Equilibrium and isotherm studies were carried out. The influences of variables such as contact time, initial concentration of resorcinol, carbon dosage in the solution on percentage adsorption and adsorption capacity of the bark have been analysed. The equilibration time was found to be 4 h. Kinetics of resorcinol onto activated carbons was checked for pseudo first order and pseudo second order model. It was found that the adsorption of resorcinol follows pseudo second order kinetics for both MOAC1 and MOAC2. The isotherm data were correlated with isotherm models, namely Langmuir and Freundlich. Adsorption isotherms were satisfactorily fitted by both the Langmuir and Freundlich model for MOAC1 and MOAC2.

• Advances in environmental research
• /
• 제7권1호
• /
• pp.29-37
• /
• 2018

A simple mathematical model for predicting fixed bed adsorption dynamics is described. The model is characterized by a linear adsorption isotherm and a linear driving force expression for mass transfer. Its analytic solution can be approximated with an algebraic equation in closed form which is easily evaluated by spreadsheet computation. To demonstrate one application of the fixed bed model, a previously published adsorption system is used as a case study in this work. The adsorption system examined here describes chromium breakthrough in a fixed bed adsorber packed with imidazole functionalized adsorbent particles and is characterized by a nonlinear adsorption isotherm. However, the equilibrium behavior of the fixed bed adsorber is in essence governed by a linear adsorption isotherm due to the use of a low influent chromium concentration. It is shown that chromium breakthrough is predicted reasonably well by the fixed bed model. The model's parameters can be easily extracted from independent batch experiments. The proposed modeling approach is very simple and rapid, and only Excel is used for computation.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
• /
• pp.886-895
• /
• 1996

To fit the desorption isotherm and adsorption isotherm for Pangola grass, the modified Henderson model, Chung-Pfost model, modified Halsey model, and modified Oswin model were used to fit the experimental EMC /ERH data. A step-by -step ERH measuring technique was used in this study. The ERH data were collected at three temperature levels of 5 $^{\circ}C$, $25^{\circ}C$ and 5$0^{\circ}C$ for Pangola grass whole plant, stem , and foliage. The modified Halsey model has the best fit for both desorption isotherm and adsorption isotherm of Pangola grass whole plant as compared with other models.

• 한국재료학회지
• /
• 제26권9호
• /
• pp.498-503
• /
• 2016

The characteristics of aqueous lithium recovery by ion exchange were studied using three commercial cation exchange resins: CMP28 (porous type strong acid exchange resin), SCR-B (gel type strong acid exchange resin) and WK60L (porous type weak acid exchange resin). CMP28 was the most effective material for aqueous lithium recovery; its performance was even enhanced by modifying the cation with $K^+$. A comparison to $Na^+$ and $H^+$ form resins demonstrated that the performance enhancement is reciprocally related to the electronegativity of the cation form. Further kinetic and equilibrium isotherm studies with the $K^+$ form CMP28 showed that aqueous lithium recovery by ion exchange was well fitted with the pseudo-second-order rate equation and the Langmuir isotherm. The maximum ion exchange capacity of aqueous lithium recovery was found to be 14.28 mg/g and the optimal pH was in the region of 4-10.

• 청정기술
• /
• 제9권2호
• /
• pp.81-85
• /
• 2003

HPLC 칼럼을 사용하여 단일성분의 등온흡착 곡선을 구하는 실험을 수행하였으며, 파라미터를 계산하기 위하여 equilibrium-dispersive model을 Macsyma$^{(R)}$(Macsyma Inc., Arligton, MA, USA.)로 전산모사하여 파라미터들을 계산하였다. 전산모사와의 적합성을 검증하기 위하여 시료로 카페인을 사용해 샘플의 과량주입 실험을 통하여 실험치와 계산치를 비교하였으며, 시료의 농도와 이동상의 유속 변화에 따른 용출 피크들의 변화를 관찰하였다.