• Journal of Korean Home Economics Education Association
• /
• v.24 no.2
• /
• pp.51-62
• /
• 2012

This research examined the method and amount changes of recommended protein intakes(RPI) for male and female adult, and pregnant lactating women from 1962's Recommended Dietary Allowances for Korean(KRDA) to 2010's Dietary Reference Intakes for Koreans(KDRIs) revised. As male and female adult's RPI calculation, factorial method was applied until 1989 KRDA, after that nitrogen balance study was applied. Basal factor in factorial method was standard protein(egg or milk protein) requirement or obligatory nitrogen(protein) loss. On the other hand, basal factor in nitrogen balance study was minimum dietary protein requirement to maintain nitrogen equilibrium balance(nitrogen intake = nitrogen excretion). Adjusting factors of RPI were stress and/or protein requirement difference among people. The RPI of male adults were 50~80 g/day, that of female adults were 45~70 g/day. The additional RPI of pregnant women were 10~30 g/day, were calculate based upon the extra protein needs caused by unborn child development. The pregnant women's additional RPI of 2010's KDRIs revised in the periods of first, second, and third trimester were 0, 15, 30 g/day, respectively. The additional RPI of lactation women were 20~30 g/day, were calculated based upon the extra protein needs caused by maternal milk secretion.

• Resources Recycling
• /
• v.21 no.6
• /
• pp.58-64
• /
• 2012

A study on the solvent extraction for the separation and recovery of Ni and Li from the leaching solution of active cathode materials of Li-ion batteries was investigated using PC88A(2-ethylhexyl phosphonic acid mono-2-ethylhexyl ester). The experimental parameters, such as the pH of the solution, concentration of extractant and phase ratio were observed. Experimental results showed that the extraction percent of Ni and Li and separation factor of Ni/Li were increased with increasing the equilibrium pH. More than 99.4% of Ni and 28.7% of Li were extracted in eq. pH 8.5 by 25% PC88A and the separation factor of Ni/Li was 411.6. From the analysis of McCabe-Thiele diagram, 99% of Ni was extracted by three extraction stages at phase ratio(A/O) of 1.5. Stripping of Ni and Li from the loaded organic phases can be accomplished by sulfuric acid as a stripping reagent and 50-60g/L of $H_2SO_4$ was effective for the stripping of Ni.

• Resources Recycling
• /
• v.25 no.6
• /
• pp.50-57
• /
• 2016

This work was examined the extraction and stripping behavior of rare earths (La, Ce, Pr, Nd, Sm) from the hydrochloric acid solution by Cyanex 572 and compared to the results that of PC88A. Experimental parameters such as equilibrium pH, extractant & strip reagent concentration were observed and extraction percentage, distribution coefficient, stripping percentage and the separation factor of the adjacent element were analyzed. The $pH_{50}$ values was more higher using Cyanex 572 than that of PC88A. As the increase of the extractant concentration, the distribution coefficient of rare earth elements was increased. Stripping percentage of rare earth elementss from the Cyanex 572 was 85% to 95% and PC88A showed 80% to 87%. Separation factor of Ce/La, Ce/Pr, Pr/Nd, Nd/Sm was enhanced about 1.0-5.0 using Cyanex 572 as an extractant in mixture solution.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.1
• /
• pp.539-544
• /
• 2023

The subject of this study is the Maae Buddha statue in granodiorite of the Mesozoic Cretaceous period, which is concerned about stability as a standing stone cultural property located in ◯◯-dong, Gyeongsangbuk-do. For stability analysis, three-dimensional face mapping, geological properties of joints, three-dimensional scanning, ultrasonic velocity, polarization microscopy, electron microscopy analysis and XRD analysis were performed. In addition, the safety factor of the Maaebul was calculated by analyzing the damage status investigation, stereographic projection analysis, rock classification, and limit equilibrium analysis. The types and scales of damage and possible collapse by section depend on the degree of weathering of the rock and the orientation and characteristics of the joints, but wedge-failure and toppling-failure are expected to be small-scale. The safety factor of Maaebul in dry and wet conditions is less than 1.2, so stability is concerned. The types of damage were mainly observed, such as exfoliation, cracking, granular decomposition, and vegetation growth. The Maaebul rock is granodiorite, and the surface discoloration materials are K, Fe, and Mg. The 4 sets of joints are developed, J1 is tensile joint and the others are shear joint. The uniaxial compressive strength estimated by ultrasonic exploration is 514kgf/cm2, which corresponds to most soft rocks and some weathered rocks. Rock classification(RMR) is estimated to be grade 5, very poor rock mass. These technique along with the existing methods of safety diagnosis of cultural properties are expected to be a reasonable tool for objective interpretation and stability review of stone cultural properties.

• Korea Trade Review
• /
• v.43 no.3
• /
• pp.125-145
• /
• 2018

The Baltic Shipping Exchange is reporting the Baltic Dry Index (BDI) which represents the average charter rate for bulk carriers transporting major cargoes such as iron ore, coal, grain, and so on. And the current BDI index is reflected in the proportion of capesize 40%, panamax 30% and spramax 30%. Like mentioned above, the capesize plays a major role among the various sizes of bulk carriers and this study is to analyze the influence of the factors influencing on charter rate of capesize carriers which transport iron ore and coal as the major cargoes. For this purpose, this study verified causality between variables using Vector Error Correction Model (VECM) and tried to derive a long-run equilibrium model between the dependent variable and independent variables. Regression analysis showed that every six independent variable has a significant effect on the capesize charter rate, even at the 1% level of significance. Charter rate decreases by 0.08% when capesize total fleet increases by 1%, charter rate increases by 0.04% when bunker oil price increases by 1%, and charter rate decreases by 0.01% when Yen/Dollar rate increases by 1%. And charter rate increases by 0.02% when global GDP increases by one unit (1%). In addition, the increase in cargo volume of iron ore and coal which are major transportation items of capesize carriers has also been shown to increase charter rates. Charter rate increases by 0.11% in case of 1% increase in iron ore cargo volume, and 0.09% in case of 1% increase in coal cargo volume. Although there have been some studies to analyze the influence of factors affecting the charterage of bulk carriers in the past, there have been few studies on the analysis of specific size vessels. At present moment when ship size is getting bigger, this study carried out research on capesize vessels, which are biggest among bulk carriers, and whose utilization is continuously increasing. This study is also expected to contribute to the establishment of trade policies for specific cargoes such as iron ore and coal.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.3
• /
• pp.543-560
• /
• 2018

With the increased development in downtown underground space facilities that vertically cross under a railway at a shallow depth, the demand for non-open cut method is increasing. However, most construction sites still adopt the pipe roof method, where medium and large diameter steel pipes are pressed in to form a roof, enabling excavation of the inside space. Among the many factors that influence the loosening region and loads that occur while pressing in steel pipes, the size of the pipe has the largest impact, and this factor may correspond to the magnitude of load applied to the underground structure inside the steel pipe roof. The super equilibrium method (SEM) has been developed to minimize ground disturbance and loosening load, and uses small diameter pipes of approximately 114 mm instead of conventional medium and large diameter pipes. This small diameter steel pipe is called an SEM pile. After SEM piles are pressed in and the grouting reinforcement is constructed, a crossing structure is pressed in by using a hydraulic jack without ground subsidence or heaving. The SEM pile, which plays the role of timbering, is a fore-poling pile of approximately 5 m length that prevents ground collapse and supports surface load during excavation of toe part. The loosening region should be adequately calculated to estimate the spacing and construction length of the piles and stiffness of members. In this paper, we conducted a comparative analysis of calculations of loosening load that occurs during the press-in of SEM pile to obtain an optimal design of SEM. We analyzed the influence of factors in main theoretical and empirical formulas applied for calculating loosening regions, and carried out FEM analysis to see an appropriate loosening load to the SEM pile. In order to estimate the soil loosening caused by actual SEM-pile indentation and excavation, a steel pipe indentation reduction model test was conducted. Soil subsidence and soil loosening were investigated quantitatively according to soil/steel pipe (H/D).

• Journal of Korean Society of Forest Science
• /
• v.94 no.4 s.161
• /
• pp.214-225
• /
• 2005

The mountain village development program in Korea started in the mountain villages, the 45.9% of total land and one of the typical marginal region, from 1995 to achieve the equilibrium development of national land and the sustainable mountain development in Chapter 13 in Agenda 21, and it has been accelerated to increase the happiness and the quality of life of mountain community residents through the expansion by province and the improvement of related laws and regulations. This study has been aimed to analyze the response of main stakeholder's -mountain village residents and local government officials - on mountain villages development, and to provide the future plan as community development. The survey and interview data were collected from the mountain villages which already developed 59 villages and developing 15 villages in 2003. The mountain village development program has achieved the positive aspects as community development plan in the several fields, - the voluntary participation of residents, the establishment of self-support spirit as the democratic civilians, the development of base of income increasement, the creation of comfortable living environment, the equilibrium development with the other regions. Especially the mountain residents and local government officials both highly satisfy with the development of base of income increasement and the creation of comfortable living environment which are the main concerns to both stakeholder. However through the mountain development program, it is not satisfied to increase the maintenance of local community and the strengthening of traditional value of mountain villages. Also to improve the sustainable income improvement effects, it is necessary to develop the income items and technical extension which good for the each region. In the decentralization era, it is necessary for local government should have the more active and multilateral activities for these. With this, the introduction of methods which the mountain community people and the local government officials could co-participate in the mountain villages' development from the initial stages and the renovation of related local government organizations and the cooperatives will be much helpful to the substantiality of mountain development program. Also it is essential for the assistance of central government to establish the complex plan and the mountain villages network for all mountain area and the exchange of information, the education and training of mountain villages leader who are the core factor for the developed mountain villages maintenance, the composition of national mountain villages representatives. In case the development proposals which based on the interests of the main stakeholder's on mountain community could be positively accepted, then the possibility of the mountain village development as one of community development will be successfully improved in future.

• Journal of the Korean Chemical Society
• /
• v.54 no.1
• /
• pp.110-114
• /
• 2010

The equilibrium of adsorption of basics dyes RB 5 and BG 4 from a single dyes in the mixtures on the sodium-exchanged clay of the Maghnia (Algeria) was studied. The maximum adsorption capacities of BR5 and BG4 in single dyes were 465.13 and 469.90 mg/g respectively. In the simultaneous adsorption of BR5 and BG4 from mixture solutions, three different initials concentrations ratios R (R=$C_{(BR5)}/C_{(BG4)}$) were tested: 2.5/1, 1/1 and 1/2.5 using ADMI method. The isotherms adsorptions of dyes from the mixtures are characteristics of competition phenomenon. A very strong interaction between BR5 and BG4 for the active sites of adsorption of surface of clay is obtained for R = 1/1. The ratio R' (R'=$Qe_{(mixture)}/Qe_{(single)}$) of the adsorption capacity of BR5 and BG4 in the mixture were reduced by factor of 0.86, 0.74 and 0.84 for the initials concentrations ratios R (R=$C_{(BR5)}/C_{(BG4)}$) of 2.5/1, 1/1 and 1/2.5 respectively. The variation of the ratio of the adsorption capacity R‘ of BR5 and BG4 in the mixture solutions with initial concentration ratios R indicates that BR5 dye is slightly favourable in the competition adsorption than BG4. Langmuir and Freundlich models fit very well with adsorption behaviour of single dyes as well as the dyes in mixture solutions.

• Clean Technology
• /
• v.26 no.3
• /
• pp.161-167
• /
• 2020

For the design of the prevention and mitigation measures in process industries involving flammable substances, reliable safety data are required. An important property used to estimate the risk of fire and explosion for a flammable liquid is the flash point. Flammability is an important factor to consider when developing safe methods for storing and handling solids and liquids. In this study, the flash point data were measured for the binary systems {2-butanol + 2,2,4-trimethylpentane}, {2-butanol + methylcyclohexane} and {2-butanol + toluene} at 101.3 kPa. Experiments were performed according to the standard test method (ASTM D 3278) using a Stanhope-Seta closed cup flash point tester. A minimum flash point behavior was observed in the binary systems as in the many cases for the hydrocarbon and alcohol mixture that were observed. The measured flash points were compared with the predicted values calculated via the following activity coefficient (GE) models: Wilson, Non-Random Two-Liquid (NRTL), and UNIversal QUAsiChemical (UNIQUAC) models. The predicted data were only adequate for the data determined by the closed-cup test method and may not be appropriate for the data obtained from the open-cup test method because of its deviation from the vapor liquid equilibrium. The predicted results of this work can be used to design safe petrochemical processes, such as the identification of safe storage conditions for non-ideal solutions containing flammable components.

• Clean Technology
• /
• v.26 no.3
• /
• pp.186-195
• /
• 2020

The isothermal adsorption, dynamic, and thermodynamic parameters of Acid black (AB) and Quinoline yellow (QY) adsorption by activated carbon were investigated using the initial concentration, contact time, temperature, and pH of the dyes as adsorption parameters. The adsorption equilibrium data fits the Freundlich isothermal adsorption model, and the calculated Freundlich separation factor values found that activated carbon can effectively remove AB and QY. Comparing the kinetic data showed that the pseudo second order model was within 10% error in the adsorption process. The intraparticle diffusion equation results were divided into two straight lines. Since the slope of the intraparticle diffusion line was smaller than the slope of the boundary layer diffusion line, it was confirmed that intraparticle diffusion was the rate-controlling step. The thermodynamic experiments indicated that the activation energies of AB and QY were 19.87 kJ mol^-1 and 14.17 kJ mol^-1, which corresponded with the physical adsorption process (5 ~ 40 kJ mol^-1). The adsorption reaction was spontaneous because the free energy change in the adsorption of AB and QY by activated carbon was negative from 298 to 318 K. As the temperature increased, the free energy value decreased resulting in higher spontaneity. Adsorption of AB and QY by activated carbon showed the highest adsorption removal rate at pH 3 due to the effect of anions generated by dissociation. The adsorption mechanism was electrostatic attraction.