• 제목/요약/키워드: equilibrium bed

검색결과 131건 처리시간 0.018초

CCHE1D 모형을 이용한 저수지 붕괴에 따른 하상변동 해석 (Numerical Analysis of River Bed Change Due to Reservoir Failure Using CCHE1D Model)

  • 손인호;김병현;손아롱;한건연
    • 대한토목학회논문집
    • /
    • 제36권2호
    • /
    • pp.219-229
    • /
    • 2016
  • 본 연구에서는 저수지의 붕괴로 인한 하류부 하천의 하상변동에 대한 해석을 수행하였다. 저수지 붕괴에 따른 1차원 비평형, 비균일 유사의 이송과 하상 변동을 연구를 위해 CCHE1D 모형을 이용하였다. CCHE1D 모형은 비평형 및 비균일 유사해석을 위해 조정거리와 분류된 입자의 입경을 사용하며, 하상 물질의 교환을 위한 혼합층의 개념이 사용된다. CCHE1D 모형을 1996년 저수지 붕괴가 발생한 Ha!Ha!강 유역에 적용하여 저수지 붕괴로 인한 하류부의 비평형, 비균일 유사이송을 해석하고, 계산 결과를 저수지 붕괴전 후에 하류부 실측 하상과 비교하였다. 또한, 조정계수($L_{s,b}$), 비평형 계수(${\alpha}_s$), 혼합층 두께(${\delta}_m$), 공극률(p')을 포함하는 주요 매개변수에 대한 민감도를 분석하였으며, 대상유역에서는 비평형 계수가 하상변동에 가장 큰 영향을 주는 것으로 나타났다.

활성탄 고정층에서 2성분 혼합가스의 종류와 혼합 분율에 따른 포화 흡착량의 변화 (Variations of Equilibrium Adsorption Capacities According to Type and Mixing Fraction of Binary Mixed Gas on Activated Carbon Fixed-bed)

  • 김효원;이송우;이민규;천재기
    • 한국환경과학회지
    • /
    • 제16권10호
    • /
    • pp.1197-1202
    • /
    • 2007
  • Adsorption experiments of binary mixed gases composed of acetone/methylethylketone (MEK), MEK/benzene, MEK/toluene, and benzene/toluene were carried out on activated carbon fixed-bed. The variations of equilibrium adsorption capacity according to type and fraction of binary gas were investigated. In case of binary gases composed of acetone/MEK and benzene/toluene, equilibrium adsorption capacities of MEK and toluene were increased according to the increase of fraction of MEK and toluene, but equilibrium adsorption capacities of acetone and benzene were decreased. In case of binary gases composed of MEK/benzene and MEK/toluene, equilibrium adsorption capacities of benzene and toluene were increased according to the increase of fraction of benzene and toluene, but equilibrium adsorption capacities of MEK was decreased.

Restoration Modeling Analysis for Abandoned Channels of the Mangyeong River

  • Kim, Jae-Hoon;Julien, Pierre Y.;Ji, Un;Kang, Joon-Gu
    • 한국환경과학회지
    • /
    • 제20권5호
    • /
    • pp.555-564
    • /
    • 2011
  • This study examines the potential restoration of abandoned channels of the Mangyeong River in South Korea. To analyze the morphological changes and equilibrium conditions, a flow duration analysis was performed to obtain the discharge of 255 m3/s with a recurrence interval of 1.5 year. It is a gravel-bed stream with a median bed diameter of 36 mm. The reach-averaged results using HEC-RAS showed that the top width is 244 m, the mean flow depth is 1.11 m, the width/depth ratio is very high at 277, the channel velocity is 1.18 m/s, and the Froude number is also high at 0.42. The hydraulic parameters vary in the vicinity of the three sills which control the bed elevation. The total sediment load is 6,500 tons per day and the equivalent sediment concentration is 240 mg/l. The Engelund-Hansen method was closer to the field measurements than any other method. The bed material coarser than 33 mm will not move. The methods of Julien-Wargadalam and Lacey gave an equilibrium channel width of 83 m and 77 m respectively, which demonstrates that the Mangyeong River is currently very wide and shallow. The planform geometry for the Mangyeong River is definitely straight with a sinuosity as low as 1.03. The thalweg and mean bed elevation profiles were analyzed using field measurements in 1976, 1993 and 2009. The measured profiles indicated that the channel has degraded about 2 m since 1976. The coarse gravel material and large width-depth ratio increase the stability of the bed material in this reach.

A simple and rapid approach to modeling chromium breakthrough in fixed bed adsorber

  • Chu, Khim Hoong
    • Advances in environmental research
    • /
    • 제7권1호
    • /
    • pp.29-37
    • /
    • 2018
  • A simple mathematical model for predicting fixed bed adsorption dynamics is described. The model is characterized by a linear adsorption isotherm and a linear driving force expression for mass transfer. Its analytic solution can be approximated with an algebraic equation in closed form which is easily evaluated by spreadsheet computation. To demonstrate one application of the fixed bed model, a previously published adsorption system is used as a case study in this work. The adsorption system examined here describes chromium breakthrough in a fixed bed adsorber packed with imidazole functionalized adsorbent particles and is characterized by a nonlinear adsorption isotherm. However, the equilibrium behavior of the fixed bed adsorber is in essence governed by a linear adsorption isotherm due to the use of a low influent chromium concentration. It is shown that chromium breakthrough is predicted reasonably well by the fixed bed model. The model's parameters can be easily extracted from independent batch experiments. The proposed modeling approach is very simple and rapid, and only Excel is used for computation.

다공성 매질에서 Local Thermal Equilibrium에 관한 연구 (Study on Local Thermal Equilibrium in a Porous Medium)

  • 장석필;김성진
    • 대한기계학회논문집B
    • /
    • 제26권8호
    • /
    • pp.1172-1182
    • /
    • 2002
  • In the present study a general criterion for local thermal equilibrium is presented in terms of parameters of engineering importance which include the Darcy number, the effective Prandtl number of fluid, and the Reynolds number. For this, an order of magnitude analysis is performed for the case when the effect of convection heat transfer is dominant in a porous structure. The criterion proposed in this study is more general than the previous criterion suggested by Carbonell and Whitaker, because the latter is applicable only when conduction is the dominant heat transfer mode in a porous medium while the former can be applied even when convection heat transfer prevails. In order to check the validity of the proposed criterion for local thermal equilibrium, the forced convection phenomena in a porous medium with a microchanneled structure subject to an impinging jet are studied using a similarity transformation. The proposed criterion is also validated with the existing experimental and numerical results for convection heat transfer in various porous materials that include some of the parameters used in the criterion such as a microchannel heat sink with a parallel flow, a packed bed, a cellular ceramic, and a sintered metal. It is shown that the criterion presented in this work well-predicts the validity of the assumption of local thermal equilibrium in a porous medium.

2중층 흡착층의 충전방법에 따른 2성분 증기의 흡착특성 변화 (Variations of Adsorption Characteristics of Binary Vapor According to Packing System of Double-layer Adsorption Bed)

  • 이민규;이송우;감상규;이석희
    • 한국환경과학회지
    • /
    • 제21권3호
    • /
    • pp.305-312
    • /
    • 2012
  • This work is to study the variations of adsorption characteristics of binary vapor according to packing system of double-layer bed by fixed bed experiment. Breakthrough curves of single and binary vapor composed of acetone and benzene on single-layer and double-layer adsorption bed composed of activated carbon (AC) and silica-aluminar (SA) were compared. Adsorptions of binary vapor on double-layer bed were influenced by the differences of surface area between adsorbents as well as the polarity difference between adsorbent and adsorbate. The roll-up phenomenon of acetone vapor was happened by replacement with competing adsorption between acetone vapor and benzene vapor on AC bed, but it was not happened on SA bed because acetone vapor and benzene vapor had less difference in affinity with SA bed. The breakthrough times of acetone vapor and benzene vapor on AC/SA double-layer bed were three times and 1.4 times larger respectively than on SA/AC double-layer bed, the differences of breakthrough times were relatively larger than the equilibrium adsorption capacities according to packing system of double-layer bed.

화학평형을 이용한 가스화기 모델링에 관한 연구 (A study on the Gasifier Modeling using a Chemical Equilibrium)

  • 정근모;임태훈;오인환;박명호
    • 에너지공학
    • /
    • 제2권3호
    • /
    • pp.276-284
    • /
    • 1993
  • 분류층 가스화기를 대상으로하여 석탄가스화 복합발전 시스템을 위한 가스화반응 모델링을 수행하였다. 가스화기 내에서의 가스화반응은 화학평형상태에 있다고 가정하여 Gibbs 자유에너지 최소화법을 이용하였다. 물질수지와 열수지를 동시에 고려한 모델링 결과와 실제 가스화기 실험자료를 비교하여 모델의 신뢰성을 확인하였다. 이를 토대로 가스화기에 공급되는 산화제의 양이 평형조성에 미치는 영향과 가스화기의 온도, 그리고 석탄종류가 가스화반응에 미치는 영향에 대해 알아보았다.

  • PDF

자유낙하수맥 하류부에서의 세굴에 관한 실험적 연구 (Experimental Study on Downstream Local Scour of Free-Falling Jet)

  • 윤세의;이종태
    • 물과 미래
    • /
    • 제28권4호
    • /
    • pp.147-154
    • /
    • 1995
  • 본 연구에서는 특별한 에너지 감세를 위한 수공구조물이 설치되지 않은 중 소규모 단락부 하류부에서 자유낙하하는 수맥으로 인하여 발생되는 비점착성 하상재료의 세굴특성을 수리모형실험을 통하여 분석하였다. 단락수맥 하류부에서의 세굴특성을 분석하기 위하여 먼저 직사각형 단락수맥의 흐름특성을 조사하였으며, 하상재료, 유량, 하류수심을 변화시키면서 세굴공의 직하류부에 생성되는 둔덕(mound)의 유무로 인한 세굴특성을 비교 분석하였다. 평형세굴심 뿐만 아니라 둔덕의 높이도 밀도 후르드수의 함수로 표시되며, 밀도 후르드수는 다른 무차원량 보다 평형세굴심과 비교적 깊은 관계가 있는 것을 확인하였다. 단락부 하류부 하상 보호공의 설계시 둔덕의 영향을 고려해야 한다는 결론을 얻었다.

  • PDF

저수지 퇴배사 모의를 위한 준정류모형 (A Quasi-Steady Model for Sedimentation and Flushing of Reservoirs)

  • 최성욱;최성욱
    • 한국수자원학회논문집
    • /
    • 제45권2호
    • /
    • pp.217-227
    • /
    • 2012
  • 본 논문에서는 저수지 퇴사 및 배사현상을 모의하기 위한 준정류 모형을 제시하였다. 준정류 모형은 하상은 시간에 따라 변하지만 유동은 정상류라는 가정에 기초한다. 이것은 유동에 비해 매우 장기간에 걸쳐 하도형태가 변하기 때문에 타당하다. 개발된 모형을 저수지 퇴사에 관한 실내실험에 적용하였다. 수치계산을 통하여 상류측에서 공급되는 유사량에 따라 하도의 수심 및 하상경사가 조정되는 것을 보였다. 수치모의에 의한 수위와 하상고가 실험결과와 잘 일치하는 것을 확인하였다. 또한, 모형을 저수지 배사 현상에 관한 선행 실험 조건에 적용하였다. 이 경우에는 배사를 촉진시키기 위해 실험에서 부정류를 발생시켰기 때문에 준정류 모형에 의한 모의결과가 관측자료와 잘 일치하지 않는 것을 확인하였다. 마지막으로, 유사공급에 따른 평형 수심과 하상경사에 관한 공식을 제시하였으며 수치실험을 통하여 이를 검증하였다.

망간산화물이 코팅된 활성탄의 납 흡착특성에 관한 칼럼 실험 (Adsorption Characteristics of Pb(II) by Manganese Oxide Coated Activated Carbon in Fixed Bed Column Study)

  • 이명은;이채영;정재우
    • 한국지반환경공학회 논문집
    • /
    • 제15권8호
    • /
    • pp.39-44
    • /
    • 2014
  • 초임계 조건에서 제조된 망간산화물이 코팅된 활성탄($Mn_3O_4$/AC)에 의한 납 흡착특성을 규명하기 위해 칼럼실험을 통해 파과특성에 미치는 운전변수의 영향에 관해 실험하였다. 활성탄에 망간산화물을 코팅시킴으로써 물질전달대와 평형흡착량은 대략 2.8배 증가하는 것으로 나타났다. 흡착층 높이의 증가는 수용액이 흡착대에 체류하는 시간을 증가시켜 파과시간, 물질전달대와 평형흡착량을 증가시키는 것으로 나타났다. 칼럼으로 공급되는 유량이 증가함에 따라 수용액으로부터 흡착제로 납이 빠르게 전달되어 접촉되므로 파과시간과 물질전달대가 감소하였다. 유량 증가는 흡착대에서 납의 체류시간을 감소시켜 흡착경계면에서의 확산현상을 감소시키므로 평형흡착량을 감소시키는 것으로 나타났다. 칼럼으로 유입되는 납 농도가 증가하면 흡착제로 전달되는 납의 양이 증가하여 물질전달이 빠르게 완료되므로 파과시간과 물질전달대가 감소하는 것으로 나타났다.