• Journal of The Korean Society of Agricultural Engineers
• /
• v.60 no.1
• /
• pp.101-110
• /
• 2018

This study experimentally investigated the compressive and flexyral strength development characteristics of polymer concrete using four different type polymeric resins such as unsaturated polyester, vinyl ester, epoxy, and PMMA (polymethyl methacrylate) as binders. The test results show that the average compressive strength of those four different polymer concretes was 88.70 MPa, the average flexural strength was 20.30 MPa. Those test results show that compressive and flexural strengths of polymer concrete were much stronger than compressive and flexural strengths of ordinary Portland cement concrete. In addition, the relative gains of the compressive strength development at the age of 24 hrs compared to the age of 168 hrs were 68.6~88.3 %. Also, the relative gains of the flexural strength development at the age of 24 hrs compared to the age of 168 hrs were 73.8~93.4 %. These test results show that compressive and flexural strengths of each polymer concrete tested in this study were developed at the early age. Moreover, the prediction equations of compressive and flexural strength developments regarding the age were determined. The determined prediction equations could be applied to forecast the compressive and flexural strength developments of polymer concrete investigated in this study because those prediction equations have the high coefficients of correlation. Last, the relations between the compressive strength and the flexural strength of polymer concrete were determined and the flexural/compressive strength ratios were from 1/4 to 1/5. These results show that polymer concretes investigated in this study were appropriate as a flexural member of a concrete structure because the flexural/compressive strength ratios of polymer concrete were much higher than the flexural/compressive strength ratios of Portland cement concrete.

• Biomolecules & Therapeutics
• /
• v.14 no.4
• /
• pp.240-245
• /
• 2006

The primary use for glycidol is as a stabilizer in the manufacture of vinylpolymers, however, it is also used as an intermediate in the production of pharmaceuticals, as an additives for oil and synthetic hydraulic fluids, and as a diluting agent is same epoxy resins. In this study, we have carried out in vitro genetic toxicity test of glycidol and microarray analysis of differentially expressed genes in response to glycidol. The result of Ames test showed mutations with glycidol treatment in base substitution strain TA1535 both with and without exogenous metabolic activation. Likewise, glycidol showed mutations in frame shift TA98 both with and without exogenous metabolic activation. The result of COMET assay in L5178Y cells with glycidol treatment showed DNA damage both with and without exogenous metabolic activation. Glycidol increased micronuclei in CHO cells both with and without exogenous metabolic activation. 150 Genes were selected as differentially expressed genes in response to glycidol by microarray analysis and these genes would be candidate biomarkers of genetic toxic action of glycidol.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.34 no.6
• /
• pp.426-432
• /
• 2021

Injection molding is used in many industrial fields such as home appliances, vehicle parts, and electronic device parts because various resins can be molded, leading to mass production of complex shapes. Generally, the empirical prediction method is used to set the initial processing conditions of injection molding. However, this approach requires a lot of cost and its presented solution is not accurate. In this paper, injection molding was simulated through the Moldflow^TM in order to manufacture the spacer for gas insulated switch. Through the simulation, the flow of the resin with respect to the diameter of the inlet was analyzed. It was found that the process was possible at a higher resin temperature as the diameter of the inlet increased. In addition, through thermal analysis during injection of the resin, it was confirmed that a stagnation phenomenon occurred at the insert portion during injection molding, and the temperature of the resin was higher than that of the mold. As in this paper, if the spacer is manufactured by optimizing the injection hole and the temperature of the injection process based on simulation, it is expected that the spacer can be manufactured with high productivity.

• Applied Chemistry for Engineering
• /
• v.30 no.1
• /
• pp.68-73
• /
• 2019

We prepared hydrophobic silica particles by a sol-gel process from tetraethyl orthosilicate (TEOS), followed by coupling the reaction with octyltrimethoxysilane (OTMS) or hexadecyltrimethoxysilane (HDTMS) under various reaction conditions. We confirmed the extent of silica surface modification with organic compounds by SEM-EDS, thermogravimetry and elemental analysis. The silica particles obtained after the hydrolysis reaction of TEOS in ethanol at $50^{\circ}C$ for 24 h and the coupling reaction with OTMS for 2 h at the same temperature displayed the optimum performance in terms of the dispersity in an organic solvent and the surface roughness of films composited with epoxy resins. The oxygen permeability of the composite film with modified-silica was 12% lower than that of using the film without modified-silica.

• Conservation Science in Museum
• /
• v.26
• /
• pp.25-34
• /
• 2021

3D printing technology has been actively applied for the restoration of cultural properties. However, its application to the restoration of glass cultural properties has not yet been reported and thus requires further study. In this study, 3D printing technology was used to restore a defective part of a glass sarira bottle that forms an element of a series of sarira reliquaries commissioned by Yi Seonggye (known as King Taejo after founding the Joseon Dynasty) that was excavated from Geumgangsan Mountain (designated as Treasure No. 1925) and is currently housed at the National Museum of Korea. The defective area was reproduced using 3D printing and the printed reproduction was reproduced again using an epoxy resin. This latter piece was used as the restoration component rather than the 3D printed element. After the completion of the conservation treatment, the materials used for the 3D printing were compared with transparent materials used to restore ceramics to evaluate their usability and stability. A total of five specimens were produced, including from photocurable resin made by a stereo lithography apparatus (SLA), epoxy resin, acrylic resin, and more. They were exposed to UV for 96 hours to test for yellowing. Of the two specimens made of photocurable resins and exposed to UV, one was sprayed with a UV blocking agent but the other was exposed as-is. The UV exposure test showed that the specimen made by the SLA and sprayed with a UV blocking agent and the specimen made of epoxy resin were stable in terms of yellowing with a change in the b-value was less than 1. They are thus considered to be suitable materials for the restoration of glass cultural properties. Such glass cultural properties are often diverse in shape and their restoration can be difficult as they generally consist of a range of complex parts that hamper restoration. In this regard, diverse materials should be considered when selecting materials for the restoration of glass cultural properties.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.2
• /
• pp.200-211
• /
• 2022

The celadon stools with an openwork ring design which consist of four items as one collection were excavated from Gaeseong, Gyeonggi-do Province. The celadon stools were designated and managed as treasures due to their high arthistorical value in the form of demonstrating the excellence of celadon manufacturing techniques and the fanciful lifestyles during the Goryeo Dynasty. However, one of the items, which appeared to have been repaired and restored in the past, suffered a decline in aesthetic value due to the aging of the treatment materials and the lack of skill on the part of the conservator, raising the need for re-treatment as a result of structural instability. An examination of the conservation condition prior to conservation treatment found structural vulnerabilities because physical damage had been artificially inflicted throughout the area that was rendered defective at the time of manufacturing. The bonded surfaces for the cracked areas and detached fragments did not fit, and these areas and fragments had deteriorated because the adhesive trickled down onto the celadon surface or secondary contaminants, such as dust, were on the adhesive surface. The study identified the position, scope, and conditions of the bonded areas at the cracks UV rays and microscopy in order to investigate the condition of repair and restoration. By conducting Fourier-transform infrared spectroscopy(FT-IR) and portable x-ray fluorescence spectroscopy on the materials used for the former conservation treatment, the study confirmed the use of cellulose resins and epoxy resins as adhesives. Furthermore, the analysis revealed the addition of gypsum(CaSO₄·2H₂O) and bone meal(Ca₁₀ (PO₄)₆(OH)₂) to the adhesive to increase the bonding strength of some of the bonded areas that sustained force. Based on the results of the investigation, the conservation treatment for the artifact would focus on completely dismantling the existing bonded areas and then consolidating vulnerable areas through bonding and restoration. After removing and dismantling the prior adhesive used, the celadon stool was separated into 6 large fragments including the top and bottom, the curved legs, and some of the ring design. After dismantling, the remaining adhesive and contaminants were chemically and physically removed, and a steam cleaner was used to clean the fractured surfaces to increase the bonding efficacy of the re-bonding. The bonding of the artifact involved applying the adhesive differently depending on the bonding area and size. The cyanoacrylate resin Loctite 401 was used on the bonding area that held the positions of the fragments, while the acrylic resin Paraloid B-72 20%(in xylene) was treated on cross sections for reversibility in the areas that provided structural stability before bonding the fragments using the epoxy resin Epo-tek 301-2. For areas that would sustain force, as in the top and bottom, kaolin was added to Epo-tek 301-2 in order to reinforce the bonding strength. For the missing parts of the ring design where a continuous pattern could be assumed, a frame was made using SN-sheets, and the ring design was then modeled and restored by connecting the damaged cross section with Wood epos. Other restoration areas that occurred during bonding were treated by being filled with Wood epos for aesthetic and structural stabilization. Restored and filled areas were color-matched to avoid the feeling of disharmony from differences of texture in case of exhibitions in the future. The investigation and treatment process involving a variety of scientific technology was systematically documented so as to be utilized as basic data for the conservation and maintenance.

• Toxicological Research
• /
• v.21 no.2
• /
• pp.167-173
• /
• 2005

Bisphenol A (BPA) is a monomer used in the manufacture of a multitude of chemical products, including epoxy resins and polycarbonate. The objective of this study was to evaluate the effects of BPA administration on reproductive characteristics and blood hematological and chemical values in offspring of pregnant dams treated with BPA. BPA was administrated to pregnant mice by intraperitoneally injection with 0, 0.05, 0.5 and 5.0 mg/kg B.W. for 5 times at 3 days interval on gestation days 1-16. There were no treatment-related effects of BPA on reproductive organ weight in male offsprings at 45 days-of-age, but body weight was the lowest in 5.0mg BPA group when compared to other groups (P<0.05). No differences in semen characteristics (sperm concentration, viability, motility and abnormality) were observed between the control and BPA treatment groups. The WBC, HB, HT, MCV, MCH, MCHC, albumin, BUN and total protein of blood hematological and chemical values in male offsprings were not difference for any treatment groups, but RBC value in BPA groups was significantly increased comparing to the control group (P<0.05). The PLT value was slightly higher in 5.0mg BPA groups than in any other group, but not significantly difference among the experimental groups. In female offsprings, the effects of BPA didn't affect to the body and ovary weight, but the uterus weight in 5.0mg BPA group was slightly heavier than that of control group (P>0.05). No statically significant difference in blood hematological values in female offsprings were observed between the control group and BPA groups, but the concentration of albumin and BUN were significantly higher in 0.5mg BPA group when compared to control and other BPA treatment groups (P<0.05). The histological evaluation of testis and ovary in growing offspring at 45 days-of-age was not difference between the control group and BPA groups, but endometriosis of the uterus in female offspring was dramatically increased in 0.5 and 5.0mg BPA groups. These founding suggest that low concentration of BPA might not have a important role on reproductive ability or blood metabolite in offspring of pregnant dams treated with BPA.

• Conservation Science in Museum
• /
• v.13
• /
• pp.1-11
• /
• 2012

While the project for registering the unregistered relics that had been stored in the relic storage warehouse was in progress, restoration operations were started for the large size pottery pieces that had been excavated from the Geumgangsa Temple Site and it is attempted to explain the pottery pieces and to introduce the process of the overall conservation treatment. About 600 pieces of large size pottery had been separately stored in more than 40 relic boxes in their original damaged condition without making it possible to figure out their shape, size, usage and quantity at all. Due to the enormous number and weight of the pottery pieces, they were, first of all, pre-classified largely into 6 groups of pottery pieces in consideration of the visible features such as pottery thickness, color sense and glaze brilliance, etc. for each kind of pottery raw material. However, as a result of making them adhere together on a temporary basis, they turned out to be only one piece of pottery in reality. In this restoring process, in order to see if the generally used cyanoacrylate adhesive was in fact safe when a very large, heavy and deformed pottery piece was to be put together, its safeness was checked by examining the adhesion velocity, adhesion strength and dissolution velocity for both from low to high viscosities through preliminary experiments. In order to restore the lost parts after putting the existing pieces together, diversified epoxy resins were used to fit their shapes. Considering that the bottom of the restored relic was shaped to be not flat but round without allowing it to stand alone, an exhibition mount was manufactured so that the relic could be stored stably and used readily for exhibition.

• Journal of the Korean Institute of Gas
• /
• v.23 no.6
• /
• pp.17-24
• /
• 2019

The combustion properties of the flammable substance used in industrial fields include lower/upper flash point, lower/upper explosion limit, autoignition temperature(AIT), fire point, and minimum oxygen concentration(MOC) etc.. The accurate assessment of these characteristics should be made for process and worker safety. In this study, tert-amylalcohol(TAA), which is widely used as a solvent for epoxy resins, oxidizers of olefins, fuel oils and biomass, was selected. The reason is that there are few researches on the reliability of combustion characteristics compared to other flammable materials. The flash point of the TAA was measured by Setaflash, Pensky-Martens, Tag, and Cleveland testers. And the AIT of the TAA was measured by ASTM 659E. The lower/upper explosion limits of the TAA was estimated using the measured lower/upper flash points by Setaflash tester. The flash point of the TAA by using Setaflash and Pensky-Martens closed-cup testers were experimented at 19 ℃ and 21 ℃, respectively. The flash points of the TAA by Tag and Cleveland open cup testers were experimented at 28 ℃ and 34 ℃, respectively. The AIT of the TAA was experimented at 437 ℃. The LEL and UEL calculated by using lower and upper flash point of Setaflash were calculated at 1.10 vol% and 11.95 vol%, respectively.

• Toxicological Research
• /
• v.34 no.3
• /
• pp.231-239
• /
• 2018

Bisphenol A, an everywhere chemical, is applied as a plasticizer in polycarbonate plastics, which often used in our everyday products and in epoxy resins as protective coatings and linings for food and beverage cans for decades. Human exposure to BPA may lead to adverse effects by interfering with oestrogen receptors. Our present study was conducted to investigate the protective effects of selenium (Se) and vitamin E (Vit E) on BPA-induced damage in the liver of male rats. Animals were randomly divided into four groups: the first group received olive oil and served as control. The second group received both (Se + Vit E) (0.5 mg/kg diet; 100 mg/kg of diet). The third one treated orally by (10 mg/kg b.w.) of BPA. The last group received (Se + Vit E) (0.5 mg/kg diet; 100 mg/kg of diet) concomitantly with (10 mg/kg b.w.) BPA. Exposure to BPA for three weeks engendered a hepatic disorder. An increased AST and ALT enzymatic activity was noticed in BPA-treated group as compared to other groups. Furthermore, a change in glucose, cholesterol, LDL-C, HDL-C, albumin, and bilirubin level was remarkable. Moreover, exposure to BPA increased malondialdehyde levels while reduced gluthatione content was decreased in the liver homogenate. A decrease in glutathione peroxidase, glutathione s-transferase and catalase activities was observed in the same group. Administration of selenium and vitamin E through the diet in BPA treated rats ameliorated the biochemical parameters cited above. In addition, an improvement in activities of liver enzymes was recorded. The histological findings confirmed the biochemical results. The model of this study that we employed characterized the relationships between BPA-induced hepatotoxicity and its alleviation by natural antioxidants like selenium and vitamin E.