• Transactions on Electrical and Electronic Materials
• /
• 제15권2호
• /
• pp.87-90
• /
• 2014

The effects of electric field frequency on the ac electrical treeing phenomena in an epoxy/reactive diluent/layered silicate (1.5 wt%) were carried out, in needle-plate electrode arrangement. A layered silicate was exfoliated in an epoxy base resin, by using our ac electric field apparatus. To measure the treeing propagation rate, constant alternating current (AC) of 10 kV with three different electric field frequencies (60, 500 and 1,000 Hz) was applied to the specimen, in needle-plate electrode arrangement, at $30^{\circ}C$ of insulating oil bath. As the electric field frequency increased, the treeing propagation rate increased. At 500 Hz, the treeing propagation rate of the epoxy/PG/nanosilicate system was $0.41{\times}10^{-3}$ mm/min, which was 3.4 times slower than that of the epoxy/PG system. The electrical treeing morphology was dense bush type at 60 Hz; however, as the frequency increased, the bush type was changed to branch type, having few branches, with very slow propagation rate.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.226-227
• /
• 2007

Nanostructured materials are attracting increased interest and application. Exciting perspectives may be offered by electrical insulation. Epoxy/Organoclay nanocomposites may find new and upgraded applications in the electrical industry, replacing conventional insulation to provide improved performances in electric power apparatus, e.g, high voltage motor/generator stator winding insulation, dry mold transformer, etc. This paper shows that electrical and thermal properties of epoxy/organoclay nanocomposites insulating materials for dsc, dielectric constant, I-V characteristics, breakdown volatge, can improve significantly with respect to the basic, virgin materials.

• 전기학회논문지
• /
• 제62권12호
• /
• pp.1694-1699
• /
• 2013

Frequency accelerated partial discharge resistance (PDR) aging of epoxy/layered silicate nanocomposite with 1.5wt % additions of layered silicate was investigated in comparison with that of epoxy without layered silicate in terms of PD(partial discharge) erosion depth. It was found that the change in the erosion depth is far smaller in specimens with layered silicate than those without layered silicate nano particles. Frequency acceleration can be done from 60Hz to 1000Hz. But the depth of erosion is less proportional to frequency. Acceleration factor is almost 2 times between 500Hz and 1000Hz, but it is much less than about 8.3 times between 60Hz and 500Hz. This superior PD resistance is caused by the presence of nanofillers, anano-effect due to closely packed nanofillers, and strong chemical bonds at layered silicate nanofillers /resin interfaces.

• Composites Research
• /
• 제37권3호
• /
• pp.209-214
• /
• 2024

그래핀 옥사이드(graphene oxide, GO)는 높은 강성, 열전도도 및 전기전도도를 가지고 있기 때문에 나노복합재료의 강화재로 적용되고 있다. 본 연구는 GO와 측면 부분에만 수산화기로 치환된 GO (E-GO)를 에폭시 나노복합재료에 적용하여 기계적 물성을 평가하였다. 초음파 분산법을 통하여 에폭시 수지에 GO/E-GO를 균일하게 분산시켰고, 인장 시험을 통하여 기계적 물성을 평가하였다. 나노입자를 첨가함에 따라 인장강도와 인성이 높아지는 것을 확인하였다. 나노 입자를 첨가하지 않은 에폭시의 인장강도는 74.4 MPa이고, E-GO를 0.3 wt% 첨가되었을 때 90.7 MPa로 가장 높은 인장강도 값을 나타내었다. 모듈러스 또한 2.55 GPa에서 나노입자의 첨가에 따라 3.53 GPa까지 증가하는 것을 확인할 수 있었다. 전계방사 주사전자현미경을 통하여 파단면을 관찰하였을 때 균열의 성장이 나노 입자에 의하여 저지되며 파단까지 이어지지 못하고, 여러 방향으로 나뉘는 현상을 보였다. 측면 부분에만 표면처리가 일어난 E-GO에서는 높은 분산도와 표면처리에 의하여 GO보다 높은 기계적 물성을 보였다. 이러한 결과를 통하여 고성능 나노복합재료의 개발을 위하여 나노 입자의 표면처리의 중요성을 확인할 수 있다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.149-149
• /
• 2009

본 연구는 고압전력용 중전기기의 몰드절연 및 옥외용 LED의 절연소재는 기기내부에서 발생된 열에너지를 외부로 방사시키는 것이 무엇보다 중요한 것이다. 이런 이유로 고압전력용 전력기기 대부분은 상당한 체적분을 가지고 있기에 초절연을 가지면서 고열전도를 갖는 나노콤포지트를 개발하기위해 에폭시 메트릭스 기반 질화알루미륨의 표면 처리를 실시하여 에폭시 AIN Nanocomposites를 제조하였다. 나노입자의 균질분산은 나노콤포지트 열전도와 초절연성능에 크게 영향을 주게 된다. 이런 소재개발을 위해 에폭시메트릭스에 나노입자의 충진함량을 3wt%로 하였다. 전처리공정을 통하여 에폭시-나노콤포지트에 두 종류의 금속성 coupling agent (Tyzor TE, Tyzor AA-75)를 질화알루미륨 나노입자 표면처리를 건식법으로 실시하였다. 제조된 Epoxy-AIN Nanocomposites의 열적특성과 전기적 특성을 측정하였다. 전기적특성으로 초절연성의 특성인 형상파라미터가 10.93을 그리고 척도파라미터는 176 kV/mm로서 Weibull Plot 누적확률밀도로서(63.2%)의 통계분석된 값을 얻었다. 또한 열적특성 평가를 위해 유리천이온도와 DMA의 온도특성를 조사하였고, 열적.전기적 특성과 나노콤포지트 내부분산(내부 모폴로지:TEM영상)와 연관되어 연구한 결과, 상당히 일치한 결과를 얻을 수 있었다.

• Carbon letters
• /
• 제24권
• /
• pp.41-46
• /
• 2017

The microstructure, flexural properties, electrical conductivity, thermal conductivity and electromagnetic interference (EMI) shielding effectiveness (SE) of epoxy composites filled with multi-walled carbon nanotubes (CNTs), exfoliated graphite nanoplatelets (xGnPs) and CNT-xGnP hybrid filler were investigated. The EMI SE of the CNT-xGnP hybrid composite was higher than 25 dB at 100 MHz while that of the xGnP based composite was almost zero. The flexural modulus of the CNT-xGnP based epoxy composite continuously increased to 3.32 GPa with combined filler content up to 10 wt% while that of the CNT based epoxy composites slightly decreased to 1.96 GPa at 4 wt% CNT, and dropped to 1.57 GPa at 5 wt% loading, which is lower than that of epoxy. The CNT and CNT-xGnP samples had the same EMI SE at the same surface resistivity, because samples with the same surface conductivity have the same amount of the charge carriers.

• Korean Chemical Engineering Research
• /
• 제50권2호
• /
• pp.371-378
• /
• 2012

3-Glycidoxypropyltrimethoxy silane(GPTMS)으로 친수성의 실리카 나노입자(SNPs)를 소수화하였으며, 소수화된 SNPs를 폴리우레탄-우레아(PUU) 에멀젼과 혼합하여 SNPs/PUU 나노복합체 필름을 제조하였다. 필름 제조 후 PUU 매트릭스 내 SNPs의 함량, SNPs 표면의 소수화 정도, 에폭시 그룹과의 열경화 반응 여부가 필름의 물성에 미치는 영향을 분석하였다. SNP 표면에 도입된 GPTMS의 최대 함량은 $1.99{\times}10^{-6}\;mol/m^2$로 SNP 표면적 기준으로 약 53% 수준이었다. GPTMS에 의한 소수화로 PUU 매트릭스 내 SNPs의 분산성이 향상되었으며, SNPs 함량이 5 wt.%에서 20 wt.%로 증가함에 따라 SNPs/PUU 나노복합체 필름의 유연성은 감소하였으나, 열 안정성은 증가하였다. 특히 Young's modulus와 tensile modulus는 에폭시의 열경화 반응 후에 크게 증가하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.262-263
• /
• 2009

To add Nanofiller in the epoxy which is used with the solid insulation material of existing and is a research which observes the improvement of the structural quality to produce the Nanocomposite. Montmorillonite uses with Nanofiller, MMT of the content expense (wt%) which is various and mixed an epoxide and produced sample. According to content of the sample result MMT according to respectively content expense to measure SEM photographing which is the possibility of knowing the minute structure of section with sample where is produced and the tensile strength will be able to observe the change of quality. MMT silicate layer uniformly more in the result and within epoxy matrix, being dispersed, will be able to observe.

• Transactions on Electrical and Electronic Materials
• /
• 제17권5호
• /
• pp.239-251
• /
• 2016

The potential of nanocomposites have been drawing the intention of the researchers from energy storage to electrical insulation applications. Nanocomposites are known to improve dielectric properties, such as the increase in dielectric breakdown strength, suppressing the partial discharge (PD) as well as space charge, and prolonging the treeing, etc. In this review, different theories have been established to explain the reactions at the interaction zone of polymer matrix and nanofiller; the characterization methods of nanocomposites are also presented. Furthermore, the remarkable findings in the fields of epoxy, cross-linked polyethylene (XLPE), polypropylene and polyvinyl chloride (PVC) nanocomposites are reviewed. In this study, it was observed that there is lack of comparison between results of lab scale specimens and actual field aged cables. Also, non-standardization of the preparation methods and processing parameters lead to changes in the polymer structure and its surface degradation. However, on the positive side, recent attempt of 250 kV XLPE nanocomposite HVDC cables in service may deliver a promising performance in the coming years. Moreover, materials such as self-healing polymer nanocomposites may emerge as substitutes to traditional insulations.

• Advances in aircraft and spacecraft science
• /
• 제9권1호
• /
• pp.69-93
• /
• 2022

Reduced graphene oxide (rGO) is one of the derivatives of graphene, which has drawn some experimental research interests in recent years however, numerical research studying the mechanical behaviors of composites made of rGO has not been taken into consideration yet. The objective of this research is to investigate the buckling, and free vibration of functionally graded reduced graphene oxide reinforced nanocomposite (FG rGORC) plates employing isogeometric analysis (IGA). The effective Young's modulus of rGORC is determined based onthe Halpin-Tsai model. Four different FG distribution types of rGO are considered varying across plate thickness. Besides, the refined plate theory is used based on Reddy's third-order function. To capture the size effect, modified couple stress theory (MCST) is employed. A comprehensive study is provided examining the effect of various parameters including rGO weight fraction, FG distribution types, boundary conditions, material length scale parameter, etc. Our obtained results show that the addition of only 1% of uniformly distributed rGO into epoxy plates leads to the fundamental frequency and critical buckling load 18% and 39% higher than those of pure epoxy plates, respectively.