• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.6
• /
• pp.1-7
• /
• 2014

Dissolving part of xylan and lignin in lignocellulosic biomass by base can be used as pretreatment technique. Cork oak was pretreated with sodium hydroxide solution and the pretreatment effects were evaluated with two critical factors - NaOH concentration and pretreatment temperature. Some of xylan and lignin were removed by base pretreatment. At $90^{\circ}C$ and 13% NaOH pretreatment, 22.0% of lignin and 78.8% of xylan removed by base treatment. Enzymatic hydrolysis of cork oak which was pretreated at higher temperature or concentration was further improved. After pretreatment of cork oak with 13% NaOH at $90^{\circ}C$, the conversion rate of cellulose to fermentable sugars were reached up to 91.3%. At ethanol fermentation with enzymatic hydrolysate from different pretreatment conditions, all enzymatic saccharification liquids were well fermented by Saccharomyces cerevisiae.

• Journal of Korean Society of Water and Wastewater
• /
• v.12 no.2
• /
• pp.115-126
• /
• 1998

In use of anaerobic bioconversion shellfish wastes present special problems, since the chitinous structures in the shell faction degrade very slowly in an anaerobic environment. Enzymatic pretreatment method was evaluated for improving the anaerobic bioconversion potential of blue crab processing wastes. An enzymatic pretreatment using chitinase enhanced the ultimate methane yield and biodergradation rate constant for total crab solid wastes by 15% and 19% respectively, above those of the untreated wastes. When the enzymatic pretreatment applied to the shell fraction alone, it resulted in increase of 34% in the ultimate methane yield and 38% in the reaction rate. The results indicate that anaerobic bioconversion of these wastes is technically feasible and enzymatic pretreatment will improve the efficiency of the process.

• Korean Chemical Engineering Research
• /
• v.53 no.2
• /
• pp.216-223
• /
• 2015

The present work explores the potential of wet air oxidation (WAO) for pretreatment of mixed lignocellulosic biomass to enhance enzymatic convertibility. Rice husk and wheat straw mixture (1:1 mass ratio) was used as a model mixed lignocellulosic biomass. Post-WAO treatment, cellulose recovery in the solid fraction was in the range of 86% to 99%, accompanied by a significant increase in enzymatic hydrolysis of cellulose present in the solid fraction. The highest enzymatic conversion efficiency, 63% (by weight), was achieved for the mixed biomass pretreated at $195^{\circ}C$, 5 bar, 10 minutes compared to only 19% in the untreated biomass. The pretreatment under the aforesaid condition also facilitated 52% lignin removal and 67% hemicellulose solubilization. A statistical design of experiments on WAO process conditions was conducted to understand the effect of process parameters on pretreatment, and the predicted responses were found to be in close agreement with the experimental data. Enzymatic hydrolysis experiments with WAO liquid fraction as diluent showed favorable results with sugar enhancement up to $10.4gL^{-1}$.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.505-505
• /
• 2009

The object is to optimize the best condition of organosolv pretreatment process with sulfuric acid as a catalyst. As a material, Pitch pine (Pinus rigida) was ground and sieved through 40-mesh screen, and Celluclast and $\beta$-glucosidase were used as enzymes for enzymatic hydrolysis. Pretreatment processes were carried out in the minibomb, and 20 g of materials with 200 ml of 50% ethanol solution (v/v) with 1% sulfuric acid as a catalyst. Pretreatment temperature was varied from $150^{\circ}C$ to $190^{\circ}C$, and time was varied from 0 to 20 min. Then, residual materials were used for enzymatic hydrolysis. The best conditions were selected by estimating followed enzymatic hydrolysis rate and degradable rates after pretreatment process. The highest value of enzymatic hydrolysis rate was obtained as 55 - 60% at 160 and at $180^{\circ}C$, but the value decreased under more severe conditions. As the residual rates decreased under severe conditions, it infered that the decrease of sugar contents limits enzymatic hydrolysis rates. Combined with enzymatic hydrolysis rate, degradable rates and H-factors, the temperatures at $160^{\circ}C$ for 20 min and at $180^{\circ}C$ for 0 min were concluded as the optimized conditions where have the lowest H-factor value for considering energy input.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.2
• /
• pp.149-158
• /
• 2010

Organosolv pretreatments which utilized sulfuric acid, sodium hydroxide and ammonia as catalysts were conducted to screen the effective catalyst for organosolv pretreatment of Liriodendron tulipifera. The enzymatic hydrolysis was achieved effectively with sulfuric acid (74.2%) and sodium hydroxide (63.7%). They were thus considered as effective catalysts for organosolv pretreatment of L. tulipifera. The organosolv pretreatments with sulfuric acid and sodium hydroxide showed a different behavior on the reaction mechanism. The pretreatment with sulfuric acid increased the biomass roughness and pore numbers. On the other hand, the pretreatment with sodium hydroxide enhanced the surface area due to the size reduction and minor defiberization which were caused by hemicellulose degradation at an initial stage and more defiberization by lignin degradation at a later stage. The organosolv pretreatment with sodium hydroxide was performed at several different conditions to evaluate effectiveness of sodium hydroxide as a catalyst for organosolv pretreatment. According to the results of enzymatic digestibility, the changes of chemical composition and the morphological analysis of pretreated biomass, it was suggested that the pretreatment time impacted primarily on enzymatic hydrolysis. Increase in surface area during the pretreatment was a major cause for improvement in enzymatic digestibility when sodium hydroxide was used as a catalyst.

• KSBB Journal
• /
• v.29 no.3
• /
• pp.193-198
• /
• 2014

Pretreatment of wastepaper using aqueous glycerol under high pressure was studied to enhance the enzymatic hydrolysis. The pretreatment was conducted over a wide range of conditions including temperatures of $150{\sim}170^{\circ}C$, sulfuric acid concentrations of 0.5~1.5%, and reaction times of 30~90 minutes. After the effect of glycerol concentration on the pretreatment performance was investigated, 70% glycerol was selected. As glycerol concentration was increased, higher digestibility was achieved due to higher lignin removal. The optimum condition was found to be around $160^{\circ}C$, 1%, and 60 minutes. At this condition, 60% and 35% of hemicellulose and lignin, respectively, were removed, while only 5% of cellulose was lost. The enzymatic digestibility was 76%, meaning that 73% of the glucan present in the initial substrate was recovered as glucose after enzymatic hydrolysis. Also, it was found that the temperature and acid concentration than the reaction time were more strongly related to the compositional removals and enzymatic digestibility.

• 한국생물공학회:학술대회논문집
• /
• 2000.04a
• /
• pp.459-462
• /
• 2000

The pretreatment of used newspaper for the enzymatic digestion preprocess was performed on a percolation reactor and a batch reactor. The test condition of percolation process was $170^{circ}C$, 60min, 1 mL/min, and 400psi, that of batch was $40^{circ}C$, 3hr. and latm Reaction solutions used in pretreatment process were aqueous ammonia, sulfuric acid, water, and hydrogen-peroxide as an oxidizing agent. As a result, the effect of pretreatment was similar to batch and percolation process, but the yield of enzymatic hydrolysis was higher in batch than percolation. This batch pretreatment enhanced enzymatic hydrolysis rate and increased glucose yield from about 15 to 20%. The inhibition factors influenced the rate of enzymatic hydrolysis was investigated, and the ink contented newspaper was the major factor.

• KSBB Journal
• /
• v.28 no.1
• /
• pp.48-53
• /
• 2013

Pretreatment of wastepaper using aqueous glycerol was investigated to enhance the enzymatic hydrolysis. The effects of four factors (solid/liquid ratio, glycerol concentration, acid concentration, and reaction time) on the dissolution yield, the removal of cellulose, hemicellulose and lignin, and the enzymatic digestibility were examined at $150^{\circ}C$. The 1/8 of solid/liquid was determined to perform the reaction uniformly, and the 93% of glycerol concentration was found to be a minimum concentration to conduct the reaction under atmospheric pressure. Also, it was found that the acid concentration and reaction time were strongly related to the dissolution yield and the removal of cellulose, hemicellulose and lignin, but moderately to the enzymatic digestibility. At an optimum condition of $150^{\circ}C$, 1 h and 1% acid concentration, 56% and 49% of hemicellulose and lignin, respectively, were removed, while only 4% of cellulose was removed. The enzymatic digestibility at this condition was 86%, meaning that 83% of the glucan present in the initial substrate was converted to glucose. Compared to glycerol with ethylene glycol as a pretreatment solvent, glycerol is much cheaper than ethylene glycol, but ethylene glycol is superior to glycerol in delignification.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.2
• /
• pp.111-122
• /
• 2013

The steam explosion-chemical pretreatment is a more effective wood pretreatment technique than the conventional physical pretreatment by accelerating reactions during the pretreatment process. In this paper, two-stage pretreatment processes of hardwood were investigated for its enzymatic hydrolysis and the succinic acid yield from the pretreated solid. The first stage pretreatment was performed under conditions of low severity to optimize the amount of solid recovery. In the second stage pretreatment washed solid material from the first stage pretreatment step was impregnated again with chemical (alkaline or chlorine-based chemicals) to remove a portion of the lignin, and to make the cellulose more accessible to enzymatic attack. The effects of pretreatment were assessed by enzymatic hydrolysis and fermentation, after the two stage pretreatments. Maximum succinic acid yield (16.1 g $L^{-1}$ and 77.5%) was obtained when the two stage pretreatments were performed at steam explosion -3% KOH.

• KSBB Journal
• /
• v.16 no.5
• /
• pp.446-451
• /
• 2001

A pretreatment method to increase enzymatic digestibility for waste paper such as newspaper was investigated. Ash content, substrate size and printed ink were considered to be factors that affect on enzymatic hydrolysis. The effect on enzymatic digestibility of varying these factor were measured. Printed ink had the highest effect of the three factors, so a method was developed to remove the ink during pretreatment. Fist, a pretreatment process using a percolation reactor was tried. The digestibility of the substrate pretreated at 170$\^{C}$, however, was less than that of the untreated substrate because only small portion of ink was removed. Therefore, a batch type process at less than 100$\^{C}$ was devised. Of several schemes, a method using amonia-hydrogen peroxide mixture on a shaking bath proved most effective. The digestibility obtained from this method was about 85%--approximately 20% greater than the untreated substrate. This proves the pretreatment method was very effective in treating waste paper. The high digestibility obtained from this pretreatment is probably due to the effects of the hydrogen peroxide that can enhance ink removal and substrate swelling.