• Korean Journal of Remote Sensing
• /
• v.26 no.2
• /
• pp.251-262
• /
• 2010

In order to provide quantitative control of the standard products of Geostationary Ocean Color Imager (GOCI), on-board radiometric correction, atmospheric correction, and bio-optical algorithm are obtained continuously by comprehensive and consistent calibration and validation procedures. The calibration/validation for radiometric, atmospheric, and bio-optical data of GOCI uses temperature, salinity, ocean optics, fluorescence, and turbidity data sets from buoy and platform systems, and periodic oceanic environmental data. For calibration and validation of GOCI, we compared radiometric data between in-situ measurement and HyperSAS data installed in the Ieodo ocean research station, and between HyperSAS and SeaWiFS radiance. HyperSAS data were slightly different in in-situ radiance and irradiance, but they did not have spectral shift in absorption bands. Although all radiance bands measured between HyperSAS and SeaWiFS had an average 25% error, the 11% absolute error was relatively lower when atmospheric correction bands were omitted. This error is related to the SeaWiFS standard atmospheric correction process. We have to consider and improve this error rate for calibration and validation of GOCI. A reference target site around Dokdo Island was used for studying calibration and validation of GOCI. In-situ ocean- and bio-optical data were collected during August and October, 2009. Reflectance spectra around Dokdo Island showed optical characteristic of Case-1 Water. Absorption spectra of chlorophyll, suspended matter, and dissolved organic matter also showed their spectral characteristics. MODIS Aqua-derived chlorophyll-a concentration was well correlated with in-situ fluorometer value, which installed in Dokdo buoy. As we strive to solv the problems of radiometric, atmospheric, and bio-optical correction, it is important to be able to progress and improve the future quality of calibration and validation of GOCI.

• Food Science and Preservation
• /
• v.19 no.4
• /
• pp.560-568
• /
• 2012

Four dimensional response surface methodology was used to monitor the extraction conditions and predict the optimum extraction conditions on physicochemical properties of Liriope platyphylla. Maximum yield of total soluble solid was 66.02% into range of 35.06~65.70%, and maximum extraction conditions were 16.86 mL/g in ratio of solvent to sample, $99.55^{\circ}C$ in extraction temperature and 3.20 hr in extraction time. Maximum extraction conditions of total phenolics were 18.78 mL/g, $97.09^{\circ}C$ and 3.71 hr. Maximum content of crude saponin was 6.51% into range of 2.22~6.21 %, and maximum extraction conditions were 21.33 mL/g, $95.49^{\circ}C$ and 3.00 hr. Maximum content of reducing sugar was 6.75% into range of 2.43~6.51%, and maximum extraction conditions were 22.93 mL/g, $89.64^{\circ}C$ and 3.75 hr. Electron donating ability was maximized in 16.74 mL/g, $99.63^{\circ}C$ and 3.16 hr. The range of optimum conditions gained by the superimposed four dimensional response surfaces on total soluble solid, crude saponin and reducing sugar of Liriope platyphylla was 15~23 mL/g, 92~$100^{\circ}C$ and 2.4~5.0 hr. And total soluble solid, total phenolics, crude saponin, reducing sugar, browning color intensity and electron donating ability at the given conditions(20 mL/g, $100^{\circ}C$, 3 hr) within the range of optimum conditions were 65.75%, 1.30 mg/g, 6.33%, 5.93%, 0.11 and 10.52%, respectively.

• Journal of Wetlands Research
• /
• v.23 no.4
• /
• pp.317-326
• /
• 2021

The present study was carried out with a view to understand the distribution and ecology of Clihton retropictus (Martens, 1879), a class II endangered wildlife designated and protected by the Ministry of Environment, Republic of Korea, and to suggest the effective conservation and management measures for this species and its habit. First, the distribution of Clihton retropictus was investigated nationwide, and environmental factors such as salinity and substratum were analyzed in consideration of the ecological characteristics of this species. In addition, the individual size, density, and movement of Clihton retropictus per each district surveyed were analyzed. Due to its nature of inhabiting in the brackish water zone, the analysis showed that the salinity of this species was 0.7 ~ 16.6‰ at low tide and 1.0 ~ 17.3% at high tide. It was learned from the analysis of substratum that its composition in each river under investigation was slightly different, but most of substratum had a higher composition ratio than gravel (pebble, 16 ~ 64 mm). On the other hand, the size of each individual was checked by measuring the length of its diameter, and there was almost no change in the individual when the inhabited range of Clihton retropictus was short. However, there was tendency that the longer the habitat range, the bigger the individual size. From surveying the population density by season, it was made clear that, during the summer (July to August) and fall (September to October), the density was relatively higher while the number of individuals decreased significantly during winter (November to December) when the water temperature was lowered. In an effort to effectively establish conservation and management measures, the moving distance was measured, and it became known that, during the surveys in summer and fall when the individuals were active, the individuals moved in more distances than during the winter survey. The results of this study are expected to be utilized as basic data for establishing effective management plans such as creation of habitats for Clihton retropictus, its migration projects and selection of migration destinations which get unavoidable due to development projects.

• Journal of Mushroom
• /
• v.19 no.3
• /
• pp.166-175
• /
• 2021

In this study, monokaryons of "Heukari" (Pleurotus ostreatus) and "Hosan" (Pleurotus pulmonarius) were separated to remove the cell wall, and a cross-species protoplast fusion was developed through chemical treatment with polyethylene glycol. The protoplast-fused PF160306 and PF160313 strains have a culture period of 10 and 2 days shorter than that of the "Heuktari" and "Hosan" cultivars, respectively. Furthermore, the growth of the strains was faster than that of the existing cultivars. The yield was 135.9 g per bottle, which was approximately 8% higher than that of the commercially available "Hosan" cultivar; however, it was not statistically significant. A growth survey was conducted after treatment at five temperatures (15, 18, 21, 23, and 25℃). The growth of the strains accelerated with the increase in temperature. However, at 21℃, the yellow color of pileus was the brightest. Band pattern, assessed using URP Primer 7, was similar to that of the "Hosan" cultivar. The DPPH radical scavenging capacity and polyphenol content were 62.5% and 43.5 mg/mL, respectively, for "Sunjung" and 65.7% and 49.9 mg/mL, respectively, for PF160313. Furthermore, the antihypertensive activities of the "Sunjung" cultivar and PF160313 were similarly high at 74% and 75%, respectively. In conclusion, cross-species hybridization via the protoplast fusion technique can be used for obtaining primary data for mushroom breeding to develop new varieties. In addition, the protoplast fusion technique might aid in expanding the market for yellow mushrooms.

• Korean Journal of Heritage: History & Science
• /
• v.42 no.3
• /
• pp.26-47
• /
• 2009

This study examined dwelling site from among the sites of the Neolithic age found in the Asan Bay(牙山灣) area, and the temporal-spatial location and meaning of the dwelling site (settlement). The majority of the settlements in the area are of a square style but some coexist with rectangular-style settlements, which is noteworthy. The dwelling sites of the Neolithic age found in Asan Bay area are mostly located in a ridge of hilly areas, divided into gentle, low areas (20~50 meters above sea level) and relatively high areas (50~80 meters above the sea level). Although location strongly corresponded to the residents' subsistence and the technical levels within the culture, it likely was greatly affected by natural environment where they lived, as well. In examining radiocarbon dating results and the excavated artifacts, the settlements found in Asan Bay were determined to belong to the period II(3,500~3,000 B.C.) stated in the Relative Chronological table of Dwelling sites in the Neolithic age, written by the author. Said Dwelling sites are proven to have a close relationship with those found on the coast of Gyeonggi Province(京畿道) and in the Geum River(錦江) valley. This is deemed to be the result of expansion and interchange between Gyeonggi Province(京畿道) group and Geum River(錦江) valley group, who constituted the large settlements. Additionally, the Daecheon-ri type dwelling sites in the Geum River valley were verified to be the result of exchange, and spread to the Asan Bay area in the same era. Two forms of Dwelling sites coexisted dynamically in the Asan Bay area around 3,500 B.C. Such a phenomenon resulted primarily from the expansion of the dwelling site due to the introduction of primitive agriculture, as well as environmental (temperature), biological and social changes at those times.

• Korean Journal of Heritage: History & Science
• /
• v.50 no.4
• /
• pp.148-165
• /
• 2017

Mural paintings drawn inside ancient tombs are very sensitive to changes in the environment such as temperature and humidity, especially the finish layer of the tomb murals differ in preservability depending on the material properties and humidity conditions. In this study, I examined the mural painting of Songsan-ri Tomb No.6, where the finish layer was made of earth, and identified the physical changes that can occur due to drying, depending on the material properties of the finish layer. I found out through particle size analysis that the finish layer of the mural painting in Songsan-ri Tomb No.6 is about 85.0wt% below silt, about 14.0wt% clay therein, mostly composed of silt and below clay. I also found out through physical property evaluation that surface change rate of samples showed the largest change at 15.5% in reproduced finish layer sample made up of bentonite, followed by 7.8% of reproduced finish layer sample made up of celadon soil, 6.3% of reproduced finish layer sample made up of loess, 6.2% of reproduced finish layer sample composed of white clay and the same order of change in appearance was confirmed in each sample consisted of soil. In addition, it showed the same trend of surface change rate, and the bentonite condition showed the largest change, in the measurement of shrinkage rate and expansion rate. The experiment shows that the finish layer composed of soil is affected by cohesion among particles according to the content of fine parts and the relationship between the agglomeration due to the content of the differentiated part and the stress due to the expansibility depending on the kind of the clay mineral etc. Therefore, it can be concluded that the physical damage occurred in the mural painting finish layer of the Songsan-ri Tomb No.6 is related to the factors such as the material characteristics of the soil and the highly humid environmental change inside the tomb.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.21 no.3
• /
• pp.208-220
• /
• 2019

The seasonality of leaf fall has important implications for understanding the response of trees' phenology to climate change. In this study, we quantified the leaf fall pattern with a model to estimate the timing and speed of leaf litter according to species and considered the nutrient use strategy of canopy species. In the autumns of 2015 and 2016, leaf litter was collected periodically using 36 litter-traps from the deciduous forests in Gwangneung and sorted by species. The seasonal leaf fall pattern was estimated using the non-linear regression model of Dixon. Additionally, the resorption rate was calculated by analyzing the nitrogen concentration of the leaf litter at each collection time. The leaf litter generally began in early October and ended in mid-November depending on the species. At the peak time (T50) of leaf fall, on average, Carpinus laxiflora was first, and Quercus serrata was last. The rate of leaf fall was fastest (18.6 days) for Sorbus alnifolia in 2016 and slowest (40.8 days) for C. cordata in 2015. The nitrogen resorption rates at T50 were 0.45% for Q. serrata and 0.48% for C. laxiflora, and the resorption rate in 2015 with less precipitation was higher than in 2016. Since falling of leaf litter is affected by environmental factors such as temperature, precipitation, photoperiod, and $CO_2$ during the period attached foliage, the leaf fall pattern and nitrogen resorption differed year by year depending on the species. If we quantify the fall phenomena of deciduous trees and analyze them according to various conditions, we can predict whether the changes in leaf fall timing and speed due to climate change will prolong or shorten the growth period of trees. In addition, it may be possible to consider how this affects their nutrient use strategy.

• Journal of Rhinology
• /
• v.25 no.2
• /
• pp.91-98
• /
• 2018

Background and Objectives: The present study evaluated the results of skin prick test using 55 allergens at 20 centers in the Republic of Korea in 2006, 2010, and 2014-2015. The aim was to assess changes in the positive rate of allergens according to temporal, regional, and environmental factors. Materials and Method: In total, 20 hospitals were selected based on the population distribution in the Republic of Korea. A skin prick test panel comprising 55 aeroallergens was distributed to 18 hospitals for this prospective study. The 2006 and 2010 skin prick test results were collected and analyzed retrospectively from 20 hospitals, while the 2014/2015 skin prick test results (from June 2014 to May 2015) were collected prospectively from 18 hospitals. Results: A total of 14,897 SPT test results were analyzed: 4,319 in 2006, 7,431 in 2010, and 1,852 in 2014/2015. The overall rate of skin prick test positivity to more than two allergens was significantly higher in males than females. The positive rates of alder pollens and birch, oak and ragweed pollen positivity were increased in older patients. Several positive rates were increased according to the temperature in spring. The positive rates for beech pollen, birch pollen, hazel pollen, oak pollen, Tyrophagus putrescentiae, mugwort, cat, Acarus siro, Lepidoglyphus destructor and Tyrophagus putrescentiae were significantly increased, while those of Cult rye pollen and dandelion were significantly decreased over the three test periods. The overall positive rate for allergens in Jeju province varied significantly from Seoul and other cities. Conclusion: Change in the positive rate of multiple aeroallergens was evaluated in the Republic of Korea over time. Our findings can be used to recommend aeroallergens suitable for inclusion in skin prick test panels in the Republic of Korea and will facilitate further investigation of changes in the patterns of allergic diseases.

• Korean Journal of Plant Resources
• /
• v.32 no.4
• /
• pp.312-317
• /
• 2019

This study was conducted with the purpose of examining the suitability of Euphorbia jolkinii Boiss. as cut flower, so that it may be introduced as a new ornamental crop. For this purpose, effect of various holding solutions on vase solution uptake rate, vase life, and relative fresh weight of cut flowering branches of E. jolkinii was examined. After harvest, cut branches were treated with 10, 50, and $100mg{\cdot}L^{-1}$ of 8-hydroxyquinoline sulfate (8-HQS), 0.1 and 0.2 mM of silver thiosulfate (STS), Chrysal, and Floralife. The cut branches of E. jolkinii were placed under the environmental conditions maintained at air temperature of $22.6^{\circ}C$, relative humidity of 45%, and 9/15h photoperiod that was controlled using fluorescent lamps (light intensity of $9.89{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$). A holding solution containing $10mg{\cdot}L^{-1}$ 8-HQS was found to be significantly effective for vase solution uptake rate compared to control, $50mg{\cdot}L^{-1}$ 8-HQS, and $100mg{\cdot}L^{-1}$ 8-HQS treatments. However, no significant difference was found in vase life between the branches treated with $10mg{\cdot}L^{-1}$ 8-HQS holding solution and branches of the control group. Increasing holding solution concentrations of STS was found to have negative effect on the vase life of cut E. jolkinii branches. Relative fresh weight of cut E. jolkinii branches were significantly decreased by two commercial holding solutions, Chrysal and Floralife. It is expected that these results would aid further studies on utilization of E. jolkinii as cut flower crop.

• Korean Chemical Engineering Research
• /
• v.59 no.1
• /
• pp.127-137
• /
• 2021

Air emission charge for nitrogen oxide as a precursor of fine dust has been introduced and implemented within the country from 2020. Therefore, the development of economical combustion technology for NOx reduction has got more needed urgently. This study investigated the air-staging effect as a way to reduce the NOx during combustion of domestic unused forest biomass, recently possible to secure REC (Renewable Energy Certification) as a substitute for overseas wood pellets in a 0.1 MWth circulating fluidized bed combustion test-rig. Operating conditions were comparison with and without air-staging, the supply position of tertiary air (6.4 m, 8.1 m, 9.4 m in the combustor) and variation of air-staging ratio (Primary air:Secondary air:Tertiary air=91%:9%:0%, 82%:9%:9%, 73%:9%:18%). NO and CO concentrations in flue gas, profiles of temperature and pressure at the height of the combustion, unburned carbon in sampled fly ash and combustion efficiency on operating conditions were evaluated. As notable results, NO concentration with air-staging application under tertiary air supply at 9.4 m in the combustor reduced 100.7 ppm compared to 148.8 ppm without air-staging while, CO concentration increased from 52.2 ppm without air-staging to 99.8 ppm with air-staging. However, among air-staging runs, when tertiary air supply amount at 6.4 m in the combustor increased by air-staging ratio (Primary air:Secondary air:Tertiary air=73%:9%:18%), NO and CO concentrations decreased the lowest 90.8 ppm and 66.1 ppm, respectively. Furthermore, combustion efficiency at this condition was improved to 99.3%, higher than that (98.3%) of run without air-staging.