• Journal of Korean Society on Water Environment
• /
• v.31 no.6
• /
• pp.610-618
• /
• 2015

This study was conducted to find out the influence of sample size (accumulated survey areas) on the seven biological indices of benthic macroinvertebrates. BMI, the index similar to Zeilika-Marvan’s saprobic index, tended to be independent on the variations of sample size. The other indices (Shannon-Weaver’s diversity, Margalef’s richness, Menhinick’s richness, Pielou’s evenness, and Lenat’s EPT index) showed the considerable variations along with the increase of sample size and environmental conditions. To get the appropriate index values, it should be sampled at least 6 replicates more based on 30×30cm Surber sampler. In addition, the habitat heterogeneity index of benthic macroinvertebrates suggested in this study, it will be able to be used for evaluating the heterogeneity of habitats.

• Journal of the Korean Society of Safety
• /
• v.25 no.2
• /
• pp.55-64
• /
• 2010

Since various weathered soils are encountered in many domestic construction sites, it is necessary to estimate characteristics of natural weathered soils. However, the remolded sample of weathered soils are commonly used to estimate their characteristics because it is very difficult to sample weathered soils in undisturbed states. However, it is well known that the behavior of remolded sample is different from that of the undisturbed sample particularly in the dynamic response, because the particle structure of undisturbed sample maintains its original structure from the mother rock. Thus, to evaluate the influence of sampling method and preparation method on stress-strain behavior, the resonant column tests were performed on the block, tube samples, remolded samples with static compression and remolded samples with tamping of the weathered granite soils. The shear modulus of the remolded sample with tamping is larger than the other samples presumably due to the high tamping pressure enough to induce particle breakage. The tube samples show larger damping ratios than other samples. Furthermore, one-dimensional ground response analysis was performed to compare the results qualitatively.

• ALGAE
• /
• v.24 no.2
• /
• pp.111-120
• /
• 2009

Choosing an appropriate sample unit is a fundamental decision in the design of ecological studies. While numer-ous methods have been developed to estimate organism abundance, they differ in cost, accuracy and precision.Using both field data and computer simulation modeling, we evaluated the costs and benefits associated with twomethods commonly used to sample benthic organisms in temperatc kelp forests. One of these methods, theTargeted Sampling method, relies on different sample units, each "targeted" for a specific species or group ofspecies while the other method relies on coefficients that represent ranges of bottom cover obtained from visual esti-mates within standardized sample units. Both the field data and the computer simulations suggest that both meth-ods yield remarkably similar estimates of organisnm abundance and among-site variability, although the Coefficientmethod slightly underestimates variability armong sample units when abundances are low. In contrast, the twomethods differ considerably in the effort needed to sample these communities; the Targeted Sampling requiresmore time and twice the persormel to complete. We conclude that the Coeffident Sampling metliod may be bettcrfor environmental monitoring programs where changes in mean abundance are of central conccm and resources arelimiting, but that the Targeted sampling methods may be better for ecological studies where quantitative reIation-ships among species and small-scale variability in abundance are of central concern.

• Applied Chemistry for Engineering
• /
• v.34 no.1
• /
• pp.30-35
• /
• 2023

The glass bead surface was coated using a TiO₂ sol, after which dry-treated (TB) and calcined (TBc) samples were prepared. Photocatalytic degradation of methylene blue and toluene, as well as characterization of the TiO₂ thin films, were carried out. The TiO₂ thin film of the TB sample had the same shape as the sponge foam, according to FE-SEM, XPS, and FTIR analyses, and contained both amorphous and crystalline TiO₂. On the other hand, crystalline TiO₂ was mainly present in the TiO₂ thin film of the TBc sample, and needle-shaped particles and tiny ones were mixed. The adsorption capacity for methylene blue and the degradation rate of the TBc sample were less than 10 % compared with those of the TB sample, and the adsorption capacity and degradation rate of the TBc sample decreased similarly as the amount of TiO₂ coating increased. The amount of toluene adsorption for the TBc sample (46 mg/g) was smaller than that of the TB sample with the same coating amount, but the degradation rate was similar. In the case of the TB sample, the degradation rate for toluene decreased less than the adsorption capacity as the amount of TiO₂ coating increased. This result is considered to be because, in the non-calcined TB sample, the active site reduction of the crystalline particles occurred less and the specific surface area of the amorphous texture decreased as the amount of TiO₂ coating increased.

• Environmental Analysis Health and Toxicology
• /
• v.27
• /
• pp.12.1-12.8
• /
• 2012

Objectives: The aim of this study was to identify the health and environmental risk factors of air contaminants that influence environmental and respiratory diseases in Gyeongju, Pohang and Ulsan in South Korea, with a focus on volatile organic compounds (VOCs). Methods: Samples were collected by instantaneous negative pressure by opening the injection valve in the canister at a fixed height of 1 to 1.5 m. The sample that was condensed in $-150^{\circ}C$ was heated to $180^{\circ}C$ in sample pre-concentration trap using a 6-port switching valve and it was injected to a gas chromatography column. The injection quantity of samples was precisely controlled using an electronic flow controller equipped in the gas chromatography-mass spectrometer. Results: The quantity of the VOC emissions in the industrial area was 1.5 to 2 times higher than that in the non-industrial area. With regards to the aromatic hydrocarbons, toluene was detected at the highest level of 22.01 ppb in Ulsan, and chloroform was the halogenated hydrocarbons with the highest level of 10.19 ppb in Pohang. The emission of toluene was shown to be very important, as it accounted for more than 30% of the total aromatic hydrocarbon concentration. Conclusions: It was considered that benzene in terms of the cancer-causing grade standard, toluene in terms of the emission quantity, and chloroform and styrene in terms of their grades and emission quantities should be selected for priority measurement substances.

• Journal of Environmental Health Sciences
• /
• v.47 no.3
• /
• pp.205-226
• /
• 2021

Objectives: Biomonitoring programs have been widely implemented in the field of environmental health, both in Korea and worldwide. Recently, it has been suggested that the storage, management, and utilization of biosamples collected from biomonitoring programs should be organized based on a biobank system. Therefore, we attempted to review the current status of representative biomonitoring programs and biobank systems that have been implemented in Korea and in other countries. Methods: We searched for bio-samples collected in domestic and foreign biomonitoring programs and their applications. For this, we referred to research papers, homepages hosted by biomonitoring programs, and project reports. We also checked information for biobanks related with biomonitoring programs, including the operating systems, facilities, technologies, and regulations of biobanks. Results: We summarized six domestic and 32 foreign biomonitoring programs. These biomonitoring programs collected bio-samples to determine the relationship between environmental chemicals and diseases. Domestically, bio-samples from KoNEHS, KorSEP, MOCEH, KoCHENS, and KorEHS-C were stored at -80℃ in a deep freezer at the National Institute of Environmental Research, while KNHANES samples were stored at Korea Biobank, which has a stabilized biobanking system with a well-established database. Nine foreign biomonitoring programs (JECS, China-NHBP, CKB, CHMS, NHANES, GerES, Germaan ESB, MoBa, and UK Biobank) were ongoing for large populations. Among them, CKB, GermanESB, and UK biobank have been maintained for at least 10 years with their own biomonitoring programs as well as advanced systems for the safe storage of bio-samples. Conclusion: Currently on-going biobanks have devoted considerable efforts to managing bio-samples for public purposes. The preceding domestic and foreign biomonitoring programs and biobanks will be great references for constructing biobank facilities and systems for environmental public health in Korea in the future.

• Hwankyungkyoyuk
• /
• v.12 no.1
• /
• pp.311-321
• /
• 1999

This survey was conducted to investigate the perception on environmental education by teachers, the current situation of environmental education including problems faced by them in teaching environmental education in the primary and secondary schools. Questions in the survey are designed to aid the development of an environmental education program on trees and forests for teachers to use in their instruction of environmental education. Eight hundred teachers were chosen as a sample in the survey and some of them were again invited to a workshop on environmental education afterwards. In the workshop the survey result was discussed in order to make it more meaningful for program development. The process of environmental education program development, which is sponsored by UNDP and the Korean Government, will be shared with the participants of the conference.

• Journal of Environmental Science International
• /
• v.13 no.2
• /
• pp.175-180
• /
• 2004

A prompt gamma-ray neutron activation (PGNA) system was simulated by the Monte Carlo N-Particle transport code (MCNP-4A) to estimate the level at which the scattered photon fluence rate, the absolute efficiency of the HPGe-detector, the volume of the concrete sample and the $^{35}$ /Cl(n, ${\gamma}$) reaction rate in this sample contribute to the count rate in the NaCl concentration measurement. The n- ${\gamma}$ fluence rates at the ST-2 beam tube exit of the HANARO reactor were used as input data, and the GAMMA-X type HPGe detector was modeled to tally 1.1649 MeV ${\gamma}$ -rays emitted from the $^{35}$ Cl(n, ${\gamma}$) reaction in the concrete sample. For three cylindrical concrete samples of 13.8, 46.8 and 157.1 ㎤ volumes, respectively, the relations between the NaCl weight fractions of 0.1, 1, 2 and 5 % in each of the concrete samples and the 1.1 649 MeV pulses created in the HPGe detector model were studied. As a result, it was found that the count rate at the same NaCl concentration nearly depends on the volume of the samples in a simulated condition of the same NaCl concentration samples, and that the linearities of the NaCl concentration calibration curves were reasonable in the narrow range of the NaCl weight fraction.

• Journal of Environmental Health Sciences
• /
• v.34 no.1
• /
• pp.95-100
• /
• 2008

An automatic titration system using a PC-camera with a color filter on its lens was used in the $KMnO_4$ consumption test of tap water and distilled water in relation to blank tests. The very faint pink color of titration end point could be effectively detected by using a yellow cellophane paper as a color filter. The average hue value (Havg) of 192 pixels in the image of the sample solution being titrated was computed and followed up at regular time intervals during titration in order to detect the titration end point. The Havg decrease of 2 degrees from the average of first 10 Havgs was regarded as reaching the end point. The volume of 0.01N $KMnO_4$ consumed by a tap water sample was $0.728{\pm}0.022ml$ in manual titration and $0.735{\pm}0.013ml$ in automatic titration (p=0.580). The volume of 0.01N $KMnO_4$ consumed by a distilled water sample was $0.383{\pm}0.015ml$ in manual titration and $0.367{\pm}0.015ml$ in automatic titration (p=0.252). The high p-values for t-test suggested that there were good agreements between manual and automatic titration data and the automatic method proposed in this article was considered to effectively replace the manual titration.

• Asian Journal of Atmospheric Environment
• /
• v.11 no.1
• /
• pp.54-60
• /
• 2017

Quantifying the trace elements in infinitesimal ambient liquid samples (e.g., single raindrop, cloud/fog water, and the soluble fraction extracted from the particles collected for a short time) is an important task for understanding formation processes, heating/cooling rates, and their health hazards. The purpose of this study is to employ an in-air micro PIXE system for quantitative analysis of the trace elements in a thimbleful of reference liquid sample. The bag type liquid sample holder originally designed with $10{\mu}m$ thick $Mylar^{(R)}$ film retained the original shape without any film perforation and apparent peaks of film blank by the end of the analysis. As one of tasks to be solved, the homogeneity of the elemental distribution in liquid reference species was verified by the X-ray line profiles for several references. It was possible to resolve the significant peaks for whole target elements corresponding to the channel number of micro-PIXE spectrum. The calibration curves for the six target elements (Si, S, Cl, Fe, Ni, and Zn) in standard solutions were successfully plotted by concentration (ppm) and ROI of interest net counts/dose (nC).