• Journal of Environmental Health Sciences
• /
• v.32 no.4 s.91
• /
• pp.373-380
• /
• 2006

The photocatalytic reactor using immobilized $TiO_2$ on silicone sealant was studied bench scale using solar light as the source of radiation. The influences of parameters such as shape, polishing extent and size of reflector, distance between reactor and reflector, an angle of inclination between reactor system and ground, were studies using Rhodamine B (RhB) as a model compound. respectively. The decolorization of round type among the reflector shapes was higher than that of the polygon and W type. The polishing extent of the reflector did not show the decolorization largely. The optimum size of reflector and distance between reactor and reflector were 38 cm and 6 cm, respectively.

• Rapid Communication in Photoscience
• /
• v.4 no.3
• /
• pp.73-75
• /
• 2015

Cr(VI) reduction was successfully achieved in the presence of cationic micelles (CMs) under visible light illumination. Micelle formation of cationic surfactants seems to be critical in Cr(VI) reduction. Cr(VI) was reduced very fast above the critical micelle concentration (cmc) of CTAB solutions, but was not reduced at all either below or around the cmc of CTAB. The reduction rate of Cr(VI) was enhanced in the absence of dissolved oxygen, supporting that the removal of Cr(VI) should be achieved via a reductive pathway. When CTAB was substituted by Brij 35 or SDS, the reduction of Cr(VI) was negligible. This indicates that the electrostatic interaction between Cr(VI) and headgroups of surfactants is important in the visible light-induced Cr(VI) reduction in micellar solutions.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.4
• /
• pp.1269-1274
• /
• 2012

A visible light responsive N, Mo co-doped $TiO_2$ were prepared by sol-gel method. X-ray diffraction, TEM, $N_2$ adsorption, UV-vis spectroscopy, photoluminescence, and X-ray photoelectron spectroscopy were used to characterize the prepared $TiO_2$ samples. Doping restrained the phase transformation from anatase to rutile and reduced the particle sizes. The band gap was much narrowed after N, Mo co-doping. The photocatalytic activities were tested in the degradation of an aqueous solution of a reactive dyestuff, methylene blue, under visible light. The photocatalytic activities of doped $TiO_2$ were much higher than that of neat $TiO_2$. The photocatalytic stability of N, Mo co-doped $TiO_2$ was much better than that of N doped $TiO_2$.

• ALGAE
• /
• v.34 no.3
• /
• pp.237-251
• /
• 2019

The dinoflagellate genus Alexandrium is known to often form harmful algal blooms causing human illness and large-scale mortality of marine organisms. Therefore, the population dynamics of Alexandrium species are of primary concern to scientists and aquaculture farmers. The growth rate of the Alexandrium species is the most important parameter in prediction models and nutrient conditions are critical parameters affecting the growth of phototrophic species. In Korean coastal waters, Alexandrium affine and Alexandrium fraterculus, of similar sizes, often form red-tide patches together. Thus, to understand bloom dynamics of A. affine and A. fraterculus, growth rates and nitrate uptake of each species as a function of nitrate ($NO_3$) concentration at $100{\mu}mol\;photons\;m^{-2}s^{-1}$ under 14-h light : 10-h dark and continuous light conditions were determined using a nutrient repletion method. With increasing $NO_3$ concentration, growth rates and $NO_3$ uptake of A. affine or A. fraterculus increased, but became saturated. Under light : dark conditions, the maximum growth rates of A. affine and A. fraterculus were 0.45 and $0.42d^{-1}$, respectively. However, under continuous light conditions, the maximum growth rate of A. affine slightly increased to $0.46d^{-1}$, but that of A. fraterculus largely decreased. Furthermore, the maximum nitrate uptake of A. affine and A. fraterculus under light : dark conditions were 12.9 and $30.1pM\;cell^{-1}d^{-1}$, respectively. The maximum nitrate uptake of A. affine under continuous light conditions was $16.4pM\;cell^{-1}d^{-1}$. Thus, A. affine and A. fraterculus have similar maximum growth rates at the given $NO_3$ concentration ranges, but they have different maximum nitrate uptake rates. A. affine may have a higher conversion rate of $NO_3$ to body nitrogen than A. fraterculus. Moreover, a longer exposure time to the light may confer an advantage to A. affine over A. fraterculus.

• Journal of Environmental Science International
• /
• v.28 no.5
• /
• pp.521-526
• /
• 2019

In this study, a solar light collector that collects and transmits solar light required for crop production in a closed plant production system was developed. The solar light collector consisted of a Fresnel lens for collecting solar light, and a tracking actuator for tracking solar light from sunrise to sunset to increase the light collection efficiency. The optical fiber that transmitted solar light was made of Glass Optical Fiber (GOF), and it had an excellent optical transmission rate. After collecting the solar light, the amount of light was measured at 5, 10, 15, 20, 25, and 30 cm distances from the GOF through the darkroom by using a light sensor logger connected to a quantum and pyranometer sensor. Compared with solar light, the light intensity of pyranometer sensor measured at 5 cm was 114% higher than solar light, and 61% at 10 cm. In addition, it was observed that it is possible to transmit the necessary amount of light for growing crops up to about 15 cm (as over 22%) through GOF. Therefore, adding diffusers to the solar light collector should be expected to replace artificial light in plant factories or plug seedlings nurseries for leafy vegetables. More studies on the solar light collection devices and the light transmission devices that have high light collection efficiency should be conducted.

• Journal of Environmental Science International
• /
• v.22 no.11
• /
• pp.1499-1508
• /
• 2013

In the results of investigating the role of LED light quality in enhancing the ornamental value of indoor foliage plants, amber and red light increased plant height, leaf width, and leaf stalk, and the consequent tree shape decreased the ornamental value. The chlorophyll content increased significantly under white light and compound light. With regard to the effect of plant leaf color on ornamental value, the value of lightness was markedly enhanced by red light. As to the functionality of plants according to photosynthetic activity, plants such as Dieffenbachia, Clusia, and Dracaena were found favorable to those staying indoors for a longtime from morning to evening. Spathiphyllum, and Ficus were found to be recommendable for indoor spaces used actively during afternoon because their photosynthesis was activated in the afternoon. With regard to power consumption according to light quality, white light consumed 119 W/hour, around 45% lower than that of fluorescent lamps, so it is considered the optimal artificial light quality that can enhance energy efficiency. Red light consumed 72 W/hour, only 33% of that of fluorescent lamps, but it was not considered the optimal light quality because plant growth was poor under the light quality. White light and compound light were found to be the ideal light sources for improving the functionality and ornamental value of indoor plants and reducing the cost of maintenance, but because compound light hinders people from recognizing the original color of plants and makes their eyes easily tired, white light was considered the optimal light satisfying all of the ornamental value, economic efficiency and functionality resulting from plant growth.

• Journal of Mushroom
• /
• v.18 no.1
• /
• pp.10-19
• /
• 2020

Light is an important factor for cordycepin production in Cordyceps militaris. We investigated the effects of different light-emitting diode (LED) conditions including various LED wavelengths and their combinations on cordycepin production in Cordyceps militaris cultivated in submerged culture. The results of our study showed that the combinations of LED wavelengths were more beneficial than single LED sources for cordycepin production. Among the three tested wavelength combinations, the greatest effects for cordycepin production were observed for the red:blue light combination at the wavelength ratio of 5:5 or 3:7. The optimal culture conditions were 19.2278 h/day of illumination time; 9.19497 g/50 mL of glucose content in the media; and 53.112 h of cultivation time. Our model predicted a maximum yield of 2860.01 ㎍/mL cordycepin. Finally, to verify the calculated maximum, we performed experiments in the culture media representing the obtained optimum combination and the cordycepin yield of 2412.5 ㎍/mL.

• Journal of Korean Society of Water and Wastewater
• /
• v.31 no.5
• /
• pp.441-445
• /
• 2017

This study aimed to investigate growth rate and nutrient consumption of Chlorella vulgaris according to different light irradiation interval. Applied light irradiation intervals were 12 hr, 4 hr, 1 hr, and 1 min. The light source was flexible LED(Blue:Red=1:1), light intensity was 200 PPFD and Light/Dark cycle was 1:1. As a result, growth rate and nutrient removal efficiencies showed no significant differences depending on the light irradiation interval. Considering the reproduction characteristics of applied microalgae cultures of this study, this is thought to be one of the possible reasons of above results. Because Chlorella vulgaris performs an asexual reproduction and it is known that there is no significant relationship between light irradiation interval and growth rate, including nutrient consumption in case of asexual reproduction.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.150-150
• /
• 2022

This study investigates the roles of decomposition methods on high accuracy in daily rainfall prediction from light gradient boosting machine (LightGBM) algorithm. Here, empirical mode decomposition (EMD) and singular spectrum analysis (SSA) methods were considered to decompose and reconstruct input time series into trend terms, fluctuating terms, and noise components. The decomposed time series from EMD and SSA methods were used as input data for LightGBM algorithm in two hybrid models, including empirical mode-based light gradient boosting machine (EMDGBM) and singular spectrum analysis-based light gradient boosting machine (SSAGBM), respectively. A total of four parameters (i.e., temperature, humidity, wind speed, and rainfall) at a daily scale from 2003 to 2017 is used as input data for daily rainfall prediction. As results from statistical performance indicators, it indicates that the SSAGBM model shows a better performance than the EMDGBM model and the original LightGBM algorithm with no decomposition methods. It represents that the accuracy of LightGBM algorithm in rainfall prediction was improved with the SSA method when using multivariate dataset.

• Journal of Environmental Science International
• /
• v.33 no.5
• /
• pp.305-322
• /
• 2024

The aim of this study was to investigate the effects of artificial light sources on the germination and seedling vigor of lettuce, aiming to identify the optimal artificial light source for producing high-quality seedlings. Lettuce cultivar of 'Tomalin' and 'Seonpunggold' exhibited the highest seed emergence in the Metal halide(MH) lamp and High-pressure sodium(HPS) lamp treatment group, while the emergence rate parameter, T50, was the fastest in the HPS lamp treatment group. Both cultivars showed good growth characteristics such as number of leaves, root length, and stem diameter under RGB-LED, and their seedling vigor was excellent as well. The plant height was smallest in the Red + Green + Blue LED treatment, but the leaves were round and thick, resulting in higher biomass and dry weight. Single light sources of Red LED and Blue LED led to reduced growth compared with that under the mixed light treatments. Chlorophyll content in lettuce varied with the type of artificial light, with both cultivars exhibiting the highest chlorophyll content in the Red + Green + Blue LED treatment. The most suitable artificial light for lettuce seedling growth was the Red + Green + Blue LED treatment.