• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.742-753
• /
• 2008

Currently an increasing number of urban tunnels with small overburden are excavated according to the principle of the New Austrian Tunneling Method (NATM). Therefore, a possibility of a tunnel collapse during excavation is getting higher in a proportionate manner. This paper will analyze causes the failure mechanism of a shallow NATM tunnel for different geological conditions, ground-water and invert solutions by investigation typical collapse site during tunnel construction. In this paper, this analysis performed two phase, firstly, the field investigation considering displacement measurement, ground-water level, geological characteristic, secondly, the numerical simulation considering the exist of invert construction and the effect of ground-water. It has been found that environmental factors such as state of underground water or construction sequences could influence failure mechanism of a shallow tunnel.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.23 no.4
• /
• pp.392-397
• /
• 2014

Recently, there is an increase in the need for precision linear stages with vacuum compatibility in such areas as lithography equipment for wafer or mask manufacturing, mask mastering equipment for optical data storage and electron beam equipment. A simple design, high stiffness and low cost can be achieved by using ball bearings. However, a ball bearing have friction and wear problems just as in ambient air. In order to decrease the friction, a special finish, a diamond-like carbon (DLC) film coating, is applied to the surface of a guide rail by sputtering deposition. This paper presents the result of an experimental investigation on the control performance of a ball bearing-guided linear motion stage under two environmental conditions: in air and vacuum. A comparison between the results with and without the DLC coating was also considered in the experimental investigation.

• Structural Engineering and Mechanics
• /
• v.65 no.3
• /
• pp.223-231
• /
• 2018

A numerical investigation of the impact of steel ductility on the strength and ductility of two-way corner and edge-supported concrete slabs containing low ductility welded wire fabric is presented. A finite element model was developed for the investigation and the results of a series of concurrent laboratory experiments were used to validate the numerical solution. A parametric investigation was conducted using the numerical model to investigate the various factors that influence the structural behavior at the strength limit state. Different values of steel uniform elongation and ultimate to yield strength ratios were considered. The results are presented and evaluated, with emphasis on the strength, ductility, and failure mode of the slabs. It was found that the ductility of the flexural reinforcement has a significant impact on the ultimate load behavior of two-way corner-supported slabs, particularly when the reinforcement was in the form of cold drawn welded wire fabric. However, the impact of the low ductility WWF has showed to be less prominent in structural slabs with higher levels of structural indeterminacy. The load-deflection curves of corner-supported slabs containing low ductility WWF are brittle, and the slabs have little ability to undergo plastic deformation at peak load.

• Journal of Soil and Groundwater Environment
• /
• v.16 no.6
• /
• pp.10-18
• /
• 2011

This study presents a state of the art in evaluation on naturally occurring asbestos (NOA) areas and effective strategies for investigation and management of NOA areas in Korea. First of all, we defined and classified the NOA area as compiling various countries' regulations, then discussed the best methods for evaluation and management of NOA for reducing exposure of asbestos in the vicinity of NOA areas. According to the literature survey, a three-steps management strategy was suggested in this study. The first step is a confirmation stage of asbestos contamination possibility and the second step is an assessment stage of asbestos contamination using investigation, analysis, evaluation and reclamation. The final step is a following-up control stage. These three management steps for NOA area will give the maximum effectiveness of NOA control in Korea.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.26 no.1
• /
• pp.55-64
• /
• 2018

The purpose of this study is to provide a design and operation technical guideline for meeting the appropriate design criteria to biogas utilization treating organic wastes. In accordance with the government's mid-to long-term policies on bio-gasification and energization of organic wastes, the expansion of the waste-to-energy (WTE) facilities is being remarkably promoted. However, because of the limitation of livestock manure containing low-concentration of volatile solids, there has been increased in combined bio-gasification without installing new anaerobic digestion facilities. The characteristics and common problems of each treatment processes were investigated for on-going 11 bio-gasification facilities. The seasonal precision monitoring of chemicophysics analysis on anaerobic digestor samples was conducted to provide guidelines for design and operation according to the progress of biogas utilization. Consequently, Major problems were investigated such as large deviation of organic materials depending on seasons, proper dehumidification of biogas, pretreatment of hydrogen sulfide, operation of power generation and steam. This study was conducted to optimize biogas utilization of type of organic waste(containing sewage sludge and food waste, animal manure), research the facilities problem through field investigation.

• Journal of The Korean Association For Science Education
• /
• v.20 no.2
• /
• pp.344-352
• /
• 2000

In this study, high school students' environmental conceptions and attitudes, and their relationships with affective variables (self-esteem, enjoyment of science lesson, and leisure interest in science) were investigated. Students' environmental conceptions were found to be low, and male students' environmental conceptions were higher than female students. However, the environmental attitudes of female students were more positive than those of male students. There were no differences between male and female students in the ecocentric attitudes, but male students had more egocentric attitudes than female students. Students of higher prior science achievement level possessed higher level of environmental conceptions than their counterparts. Among the affective variables studied, leisure interest in science was significantly correlated with environmental attitudes.

• Journal of Research and Publication Ethics
• /
• v.3 no.2
• /
• pp.13-17
• /
• 2022

Purpose: Environmental education-research mainly focuses on the relationship between people and the environment. The purpose of this study is to focus on elaborating on the various ethical behaviors crucial in environmental education-related research. The study utilized a literature review of initial studies conducted on the topic as the primary source of information. Research design, data and methodology: This study has selected the literature content analysis as a research design because this analysis tool provided the present author numerous and tremendous previous works in the realm of authors' ethical issues within environmental education area and prior research already confirmed the high quality of an instrument. Results: Based on the investigation of the literature analysis, the findings emphasize that, while making any choice regarding environmental studies and research, authors and researchers must consider how ethical behavior might be applied to the particular circumstance. There are three ethical behaviors for authors and they can be founded in the section 3 of this study. Conclusions: As a conclusion of this study, three major subfields of environmental ethics-resource ethics, animal ethics, and ethics of nature protection-serve as the foundation for ethical behavior in research on environmental education. The ethical treatment of scarce resources, deployable resources, and environmental media.

• Economic and Environmental Geology
• /
• v.39 no.4 s.179
• /
• pp.403-416
• /
• 2006

Magnetic method is rapid, cheap and simple geophysical exploration technique, and has wide range of applications such as resources prospecting, geological structure investigation and even geotechnical and environmental problems. Especially, aeromagnetics gives fundamental and useful geoscientific data fnr not only assessment of potential resources, but also national land planning. Magnetic method, perhaps the oldest geophysical technique, was relatively early introduced into Korea. Documents during Japanese occupation says that magnetic method was used for exploring metallic ore deposits and hot spring, and that a geomagnetic observatory was operated. From mid 1950's, after Korean War, magnetic explorations for natural resources such as metallic ore, uranium, coal, and groundwater were intensively executed for industrialization. Apache aeromagnetic survey project during $1958{\sim}1959$ and its ground follow-up surveys are typical and important cases in those days. Magnetic survey techniques were rapidly advanced during 1970's and 1980's with improvements of instruments, growth of geophysical manpower, and availability of computers. The national aeromagnetic mapping project by KIGAM in 1981 showed the improved technical capability of those days. Decline of mining industry since mid 1980's moved the exploration objects from traditional resources to new ones such as groundwater and geothermal resources, and applications to investigation of geological structure were revived. Recently appeared applications such as natural hazard assessment, and engineering and environmental studies increased the magnetic method's utility in the realm of exploration.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.3
• /
• pp.65-74
• /
• 2014

Borehole investigation which is mainly used to figure out geotechnical characterizations at construction work has the benefit that it provides a clear and convincing geotechnical information. But it has limitations to get the overall information of the construction site because it is performed at point location. In contrast, geophysical measurements like seismic survey has the advantage that the geological stratum information of a large area can be characterized in a continuous cross-section but the result from geophysics survey has wide range of values and is not suitable to determine the geotechnical design values directly. Therefore it is essential to combine borehole data and geophysics data complementally. Accordingly, in this study, a three-dimensional spatial interpolation of the cross-sectional distribution of seismic refraction was performed using digitizing and geostatistical method (krigring). In the process, digital map were used to increase the trustworthiness of method. Using this map, errors of ground height which are broken out in measurement from boring investigation and geophysical measurements can be revised. After that, average seismic velocity are derived by comparing borehole data with geophysical speed distribution data of each soil layer. During this process, outlier analysis is adapted. On the basis of the average seismic velocity, integrated analysis techniques to determine the three-dimensional geological stratum information is established. Finally, this analysis system is applied to dam construction field.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2007.11a
• /
• pp.139-144
• /
• 2007

Although human beings have been able to lead the affluent life owing to industrialization and development of science and technology, as the result of this, the nature has be destroyed, energy consumption has been accelerated, urban area has got wide and the nature has got narrow. In the face of such critical situations, concerns have been aroused to environment. In order to minimize the environment destruction and accompany the aesthetic, efficient and advantage methods, environmental marketing has been introduced to indoor. Environmental marketing is the marketing that minimizes the reverse function so as to obtain the satisfactory result, and it is still in the stage of fundamental investigation. stage. As the concept and type of environmental marketing have not been established yet for interior design, environmental marketing currently applied to indoor space is classified Into three types in this study. Through the four types of environmental marketing, which are the introduction of natural elements to indoor space, the use of eco-friendly materials and the use of sustainable materials, renovation it is intend to derive the environmental marketing strategy and present the sequence of strategy establishment and desirable direction in environmental marketing.