• Journal of Environmental Health Sciences
• /
• v.47 no.2
• /
• pp.166-174
• /
• 2021

Objectives: This study aimed to provide temporal Acute Exposure Guideline Levels (AEGL) for a hazardous substance as a pilot study. Methods: As one of the substances designated by the Korea Ministry of Environment as requiring preparations for potential accidents, formaldehyde was selected to estimate the AEGLs. The calculation was based on Haber's formula (Cn×t=k) using valid toxicity data (for humans/animals). A total of 96 points of AEGL levels were provided using an interval of five minutes over eight hours. Results: The AEGL-1 and 2 values were constant for the entire exposure duration at 0.9 ppm and 14 ppm, respectively. The values were obtained from clinical/animal tests, and the adaptation effect after a given exposure duration was also considered. AEGL-3 was based on animal toxicity data, and it was estimated from 127 ppm for the initial five minutes to 35 ppm for eight hours. Conclusions: More specific AEGL levels for formaldehyde could be obtained in this study using toxicity data with Haber's formula. Based on this methodology, it would be also possible to estimate AEGL levels that can be used at the scene of a chemical accident for other substances requiring preparation for potential accidents.

• Journal of environmental and Sanitary engineering
• /
• v.7 no.2
• /
• pp.53-68
• /
• 1992

Since 1962, Korea has made a remarkable progress with continuous success of Five-Year Economic Development Plans. Over the last 30 years, Korea has achieved a fast growth in various industries including heavy industry and chemical industry with rapid urbanization at the same time. The fast industrialization and urbanization brought about huge amount of hazardous/toxic substances and wastes. The environmental pollution problems have now emerged from regional concerns to overall social issues accordingly. The situation has come to a point where pollution control and environment preservation have become one of the nation's major policies. Following the recent Earth Summit of UNCED Conference held in Riode Janeiro in June 1992, where the topic was environmentally sound and sustainable development, awareness upon the importance of environmental preservation has been heightened globally, The environmental issues will gradually influence the international society more and more, politically as well as economically, The environmental pollution control industry in Korea started in the early 70's with the development of the nation's industrialization, As the people's awareness on pollution increases and environmental laws and enforcing regulations were established, demand for pollution control began to increase. The environmental pollution control business came to be recognized as an independent industry in the mid'70's. It should be evaluated properly that over the last 30 years, the Korean pollution control industry has supplied locally manufactured pollution control facilities to the increasing local demand. Concerning the quality and customer satisfaction, however, there are still many aspects which need to be improved compared with those of advanced countries. Although the start of the pollution control industry in Korea is just 10 to 15 years behind the advanced countries such as Japan and European countries, current gap in the environmental technology is rather considerable. And, studies should be made to find out the reasons for the current technology gap, and therefore, to implement solutions to improve the technology and competitiveness of the environmental pollution control industry in Korea.

• Korean Journal of Community Nutrition
• /
• v.16 no.4
• /
• pp.466-472
• /
• 2011

Hazardous chemicals, such as polycyclic aromatic hydrocarbons (PAHs), volatile organic compounds (VOCs) and heavy metals, are known as being harmful to human health were included in oils released by the Herbei Spirit Oil Spill accident in December 2007. To investigate changes of eating habits by the exposure to harmful substances, we conducted 5 focus group interviews for residents at Taean coast areas, who had experienced the oil spill accident. Participants included 46 women (mean age: $57.2{\pm}10.9$) who were mainly responsible for preparing family meals. Focus group discussions were audio-taped, transcribed and categorized by themes. Participants expressed more frequent illness symptoms such as dizziness, vomiting, visual loss, and skin diseases after the accident. They mentioned that their worries about economic hardship and worsened health status since the accident induced mental problems, such as depression about their children. Regarding eating habits, participants reported less intakes of fishes and meats and relatively more intakes of vegetables and kimchi due to the lack of household incomes after the accident. Although the participants had been used to collecting or catching fish or shellfish for their consumption previously, they mainly purchased these foods from local markets after the accident. Changes of eating habits induced by the accident included drinking boiled water and having steamed or fried seafood rather than raw seafood. Changes of food intakes occurred less frequently in older adults due to their longterm fixed eating habits, although they felt uncomfortable for having raw fish. The findings of this study clearly present that the exposure of hazardous substances by the oil spill accident had a significant impact on changes in eating habits besides economic, physical, and mental problems among the residents in Taean. Continuous health and nutrition monitoring and support are needed.

• Analytical Science and Technology
• /
• v.20 no.3
• /
• pp.183-192
• /
• 2007

The various environmental regulation directives such as RoHS (restriction of hazardous substances in electrical and electronic products) and WEEE (waste from electrical and electronic equipments) are practically used as the technical barrier in international trade (TBT) of vehicles and electrical and electronic products recently. Regarding such an environmental regulation, Korea Research Institute of Standards Science (KRISS) organized a proficiency testing scheme to establish the reliability of measurement results produced by the relevant research institutes and test laboratories in Korea. Participants were 31 laboratories related to production of the electrical and electronic equipments and mobile vehicles. Two polypropylene samples of pellet type were employed as the proficiency testing materials (PTMs). Cadmium and lead were the analytes chosen among six components regulated in European Union (EU) RoHS directive. The PTMs were sent to the participants by post on September $1^{st}$ 2006, and deadline for results submission were October $10^{th}$ 2006. The results of each laboratory were evaluated in comparison with KRISS reference values using Robustic Z-score and Youden plot methods. The results of the various sample digestion methods were also compared. Most of participants reported good agreement within 10 % range of reference values. However, results from several laboratories showed significant biases from reference values. These laboratories should establish the quality assurance system for improvement of the measurement reliability.

• Journal of the Korean Society of Safety
• /
• v.33 no.5
• /
• pp.150-156
• /
• 2018

As the types and usage of chemical increase, modern countries should protect their health and environment from the risk of hazardous chemical. Chemical accidents not only affect humans but also cause huge losses to the environment. Moreover, since its effects do not end in a short period of time, it is necessary to identify the extent of the damage and establish a prevention and response system in advance. In 2015, the Chemical Substances Management Act provided a system for assessing the impact on the people and the environment around the workplace. However, it is difficult to quantitatively evaluate the impact on environmental factors such as vegetation and aquatic, with the current hazard assessment methods. The purpose of this study is to analyze the quantitative risk of environmental receptors. This study improved the existing risk assessment formula by using the environmental vulnerability index and established the end point concentration criterion which can estimate the damage range to environmental media. To verify the results of the study, a virtual accident scenario was selected and a case study was conducted. As a result, the extent of impact on the environmental medium can be calculated, and the degree of environmental risk of the zone can be quantified through the risk analysis considering the environmental vulnerability. This study is expected to increase the reliability of the reliability of the existing risk anaylsis method beacause it is a risk analysis method that can be applied when the environmental factors are absolutely necessary and when the residents and environment are complex.

• Environmental Engineering Research
• /
• v.13 no.3
• /
• pp.112-118
• /
• 2008

Residual solid in excess sludge treated by hydrothermal reaction was investigated as raw material for its recycling. Treated excess sludge and residual solid were also focused on their content change during hydrothermal reaction. Two kinds of excess sludge, obtained from a local food factory and a municipal wastewater treatment process, were tested under various conditions. Following hydrothermal reaction, depending on the reaction conditions, biodegradable substrates in treated excess sludge appeared to increase. The separated residual solid was a composite composed of organic and inorganic materials. The proportion of carbon varied from 34.0 to 41.6% depending on reaction conditions. Although 1.89% of hazardous materials were detected, SiO2 (Quartz) was a predominant constituent of the residual solid. X-ray diffraction (XRD) experiments revealed that the residual solid was of a partially amorphous state, suggesting that the residual solids could be easily converted to stable and non harmful substances through a stabilization process. Thus, this technology could be successfully used to control excess sludge and its reuse.

• Korean Journal of Hazardous Materials
• /
• v.2 no.1
• /
• pp.18-26
• /
• 2014

We analyzed the demand of competent authorities requiring adequate technical information for initial investigation of chemical accidents. Reflecting technical reports on chemical accident response by environmental agencies in the U.S. and Canada, we presented information on environmental diffusion and toxic effects available for the first chemical accident response. Hydrogen fluoride may have the risk potential to corrode metals and cause serious burns and eye damages. In case of inhalation or intake, it could have severe health effects. The substance itself is inflammable, but once heated, it decomposes producing corrosive and toxic fume. In case of contact with water, it can produce toxic, corrosive, flammable or explosive gases and its solution, a strong acid, may react fiercely with a base. In case of hydrogen fluoride leak, the preventive measures are to decrease steam generation in exposed sites, prevent the transfer of vapor cloud and promptly respond using inflammable substances including calcium carbonate, sodium bicarbonate, ground limestone, dried soil, dry sand, vermiculite, fly ash and powder cement. The method for fire fighting is to suppress fire with manless hose stanchions or monitor nozzles by wearing the whole body protective clothing equipped with over-pressure self-contained breathing apparatus from distance. In case of transport accident accompanied with fire, evacuation distance is 1,600m radius. In cae of fire, fire suppression needs to be performed using dry chemicals, CO₂, water spray, water fog, and alcohol-resistance foam, etc. The major symptoms by exposure route are dyspnoea, bronchitis, chemical pneumonia and pulmonary edema for respiration, skin laceration, dermatitis, burn, frostbite and erythema for eyes, and nausea, diarrhea, stomachache, and tissue destruction for digestive organs. In atmosphere, its persistency is low, and its bioaccumulation in aquatic organism is also low.

• Korean Journal of Environmental Agriculture
• /
• v.39 no.3
• /
• pp.253-262
• /
• 2020

BACKGROUND: It has been reported that the nutritional composition of Locusta migratoria (Orthoptera: Acrididae) changes nutrients depending on the host plants. In this study, to confirm whether Locusta migratoria is an edible insect, the nutrients and harmful substances such as heavy metals and pathogens were analyzed and compared according to corn (LC) or wheat (LW) as host plants. METHODS AND RESULTS: All experimental methods mainly referred to AOAC (2004). The content of crude protein per dry weight was 77.3% in (LW), 1.1 times higher than 69.8% in LC. Crude fat was 6.5% in LW, 2.2 times less than LC 14.3%. Alpha-linolenic acid, which has the highest content among unsaturated fatty acids, was 1.2 times higher in LC (39.9%) than LW (32.5%). As a result of analysis of harmful substances by LC and LW, lead and cadmium among heavy metals were at levels suitable for heavy metal standards of edible insects, and arsenic was not detected in both groups. E. coli and Salmonella spp. were not detected in both groups. CONCLUSION: When comparing the overall nutrients composition of LW and LC, it was confirmed nutrients are different depending on the host plants, and the safety was proved.

• Journal of Environmental Health Sciences
• /
• v.46 no.4
• /
• pp.470-479
• /
• 2020

Objectives: The Coronavirus Disease 2019 (COVID-19) pandemic has caused the death of 740,000 people around the world as of August 12, 2020. Foot-and-Mouth Disease, Avian Influenza, and African Swine Fever are serious livestock diseases. Government agencies in Korea have provided ingredient information and usage instructions for disinfectants used to counter those infectious diseases. The purpose of this study was to provide information on the chemical ingredients in disinfectant products used against COVID-19 and certain livestock diseases. Methods: We collected information from the Korean government. The Central Disaster Management Headquarters and Central Disease Control Headquarters provided information on disinfectant products used against COVID-19. The Animal and Plant Quarantine Agency of Korea provided information on efficacy-certified disinfectant products for use against selected livestock diseases. Health hazard and environmental hazard information on the ingredients in the disinfectants was collected from the Korea Occupational Safety & Health Agency's Material Safety Data Sheets, and toxicity value information was collected from United States Environmental Protection Agency's CompTox Chemicals Dashboard. Results: There were 76 COVID-19 disinfectant products in use, and the most common ingredients were benzalkonium chloride (51%), alkylbenzyl dimethyl ammonium (30%), and ethanol (3%). There were 216 livestock disease disinfectant products comprised of 89 acidic, 88 oxidic, 30 aldehydic, three alkaline, and six other products. Among the 49 active ingredients used in the disinfectants that were investigated, health and environmental hazard information was provided for many of them, but only 20 chemicals had official toxicological information. Conclusion: Since the disinfectants included numerous chemicals, an understanding of their chemical characteristics could be critical to prevent unintended human or environmental exposure.

• Analytical Science and Technology
• /
• v.25 no.5
• /
• pp.273-283
• /
• 2012

Phthalate plasticizers are regulated by RoHS, REACH and CPSC as hazardous substances. Responding to these international environmental restrictions, we developed ABS certified reference material (CRM) for determination of phthalate plasticizers such as DMP, DEP, DBP, BBP, DEHP and DnOP. The candidate material has been made with ABS resin widely used in electric and electronic products and 6 kinds of phthalate plasticizers. The making of the material involved a series of processes like extruding, cooling, pelletizing, and drying using twin screw extruder. Then it has been certified according to ISO Guide 35. Using isotope dilution-gas chromatography/mass spectrometry (ID-GC/MS), homogeneity, short-term stability, and long-term stability were evaluated. The certified values were determined by using primary reference material (PRM) of KRISS for traceability. From now on, we will provide ABS CRM to national and international companies and research institutes after certification as certified reference material and registering on COMAR (code of reference material).