• 한국산업보건학회지
• /
• 제17권1호
• /
• pp.63-70
• /
• 2007

This study investigated the current management staus of chemical substance information on Material Safety Data Sheets(MSDS) and Chemical Information Cards(CIC) provided by Korea Occupational Safety & Health Agency(KOSHA) and also researched the kind and the characteristics of chemical substance information provided in other organizations. MSDS DB in Korean provided on KOSHANET(which is Kosha website) is 50,802 in total, among whom are single chemical substances with 31,870 kinds(18,932%) and are mixed chemical substances with 31,870 kinds(62.7%). The number of visiting MSDS DB on KOSHANET for the search of chemicals was 2,049,806. The number has increased each year. The CIC provided for workplaces is all 542 kinds : 14 harmful substances subject to permission, 168 harmful substances subject to management, 360 KOEL(Korean Occupational Exposure Limits) establishment substances. MSDS internationally provided by organizations producing MSDS DB was written with 16 sections, which is suitable for the writing basis of American Standards Institute(ANSI) and International Organization for Standardization(ISO) and provided chemical substance information on more than 100,000 kinds in most organizations.

• 대한환경공학회지
• /
• 제28권4호
• /
• pp.362-367
• /
• 2006

도시 하수처리장에서 수집되는 폐활성 슬러지는 유기성 물질을 다량 함유하고 있는 바이오매스이다. 하지만, 대부분의 연구 결과 폐활성 슬러지를 이용한 생물학적 수소생산율은 매우 낮다고 보고되고 있다. 본 연구에서는 폐활성 슬러지를 산, 알카리 처리, 기계적 처리, 열처리, 오존 처리, 초음파 처리 등의 전처리에 대한 효과를 살펴보았다. 전처리 실험결과, 폐활성 슬러지 내의 유기물질들은 가용화되었으며 $SCOD_{Cr}$값으로 약 14.6배의 증가를 보였다. 열처리된 혐기성 슬러지를 이용하여 폐활성 슬러지로부터 최적의 생물학적 수소생산을 위한 실험은 전처리 방법에 대한 효과 및 완충용액의 효과, 수소분압, 그리고 염소이온의 농도 등에 대하여 회분식 조건에서 살펴보았다. 실험결과 효과적인 전처리 방법 및 완충용액의 첨가, gas sparging 등의 방법에 의한 낮은 수소분압인 경우에 수소생산율이 0.52 mmol $H_2/g$-DS(Dried Solids)로 크게 증가함을 확인하였다.

• 한국산업보건학회지
• /
• 제28권3호
• /
• pp.241-256
• /
• 2018

Objectives: This study aimed to review the characteristics of three-dimensional printing technology focusing on printing types, materials, and health hazards. We discussed the methodologies for exposure assessment on hazardous substances emitted from 3D printing through article reviews. Methods: Previous researches on 3D printing technology and exposure assessment were collected through a literature review of public reports and research articles reported up to July 2018. We mainly focused on introducing the technologies, printing materials, hazardous emissions during 3D printing, and the methodologies for evaluation. Results: 3D printing technologies can be categorized by laminating type. Fused deposition modeling(FDM) is the most widely used, and most studies have conducted exposure assessment using this type. The printing materials involved were diverse, including plastic polymer, metal, resin, and more. In the FDM types, the most commonly used material was polymers, such as acrylonitrile-butadiene-styrene(ABS) and polylactic acids(PLA). These materials are operated under high-temperature conditions, so high levels of ultrafine particles(mainly nanoparticle size) and chemical compounds such as organic compounds, aldehydes, and toxic gases were identified as being emitted during 3D printing. Conclusions: Personal desktop 3D printers are widely used and expected to be constantly distributed in the future. In particular, hazardous emissions, including nano sized particles and various thermal byproducts, can be released under operation at high temperatures, so it is important to identify the health effects by emissions from 3D printing. Furthermore, appropriate control strategies should be also considered for 3D printing technology.

• 한국환경보건학회지
• /
• 제40권1호
• /
• pp.17-26
• /
• 2014

Background: Despite children's unique characteristics that distinguish them from adults, relatively few attempts have been made to measure exposure factors for characterization of children's exposure to hazardous chemicals in child-specific products (CSP). This study was conducted to establish the child-specific exposure factors for exposure and risk assessment of hazardous substances in CSP. Methods: We investigated the exposure factors (e.g., time use of child-products, time and frequency of object-to-body contact, time and frequency of object-to-mouth contact) influencing children's exposure to CSP (e.g., toys, playmats, oil pastels, etc.) in 650 children through a parent-completed questionnaire using a web-based survey. Participants were recruited in five age groups, <1, 1-2, 2-3, 3-6, and 6-12 years of age. Results: The child-specific exposure factors were presented as the mean, median, $95^{th}$ percentile, minimum, and maximum values. Time activity for play mats was the longest among CSP and infants spent more time on them than did elder age groups (189.3-224.7 min/day for <1-2 years vs. 91.2 min/day for 6-12 years). It is apparent that time and frequency of toy block- and plastic toy-to-mouth contact significantly decreased as a function of age. When the variation of CSP use patterns was compared by gender, the only variable that was statistically different between genders was time activity in child-products exposure space. Conclusion: We believe the five child-specific exposure factors suggested in the present study will be valuable for reducing uncertainty in the estimation of chemical exposure during risk assessment of CSP and furthermore, in the appropriate regulations to protect children's health.

• 한국산업보건학회지
• /
• 제29권3호
• /
• pp.310-321
• /
• 2019

Objectives: The purpose of this study was to investigate types and characteristics of chemical substances used in LCD(Liquid crystal display) panel manufacturing process. Methods: The LCD panel manufacturing process is divided into the fabrication(fab) process and module process. The use of chemical substances by process was investigated at four fab processes and two module processes at two domestic TFT-LCD(Thin film transistor-Liquid crystal display) panel manufacturing sites. Results: LCD panels are manufactured through various unit processes such as sputtering, chemical vapor deposition(CVD), etching, and photolithography, and a range of chemicals are used in each process. Metal target materials including copper, aluminum, and indium tin oxide are used in the sputtering process, and gaseous materials such as phosphine, silane, and chlorine are used in CVD and dry etching processes. Inorganic acids such as hydrofluoric acid, nitric acid and sulfuric acid are used in wet etching process, and photoresist and developer are used in photolithography process. Chemical substances for the alignment of liquid crystal, such as polyimides, liquid crystals, and sealants are used in a liquid crystal process. Adhesives and hardeners for adhesion of driver IC and printed circuit board(PCB) to the LCD panel are used in the module process. Conclusions: LCD panels are produced through dozens of unit processes using various types of chemical substances in clean room facilities. Hazardous substances such as organic solvents, reactive gases, irritants, and toxic substances are used in the manufacturing processes, but periodic workplace monitoring applies only to certain chemical substances by law. Therefore, efforts should be made to minimize worker exposure to chemical substances used in LCD panel manufacturing process.

• 생태와환경
• /
• 제55권3호
• /
• pp.185-200
• /
• 2022

수환경 내 다양한 유해물질의 위해성에 대한 관심은 환경 매체 내 물질의 농도뿐만 아니라 복잡한 먹이단계를 통한 어류 체내의 축적과 어류를 통한 인체 위해성으로 이어진다. 국내의 경우 2016년 이후 생활에서 사용되고 있는 화학제품(생활화학제품) 기인 위해 우려물질의 관리를 위한 등록과 평가 등에 관한 법률 개정과 함께 이들 물질의 환경 배출이 주목받게 됨에 따라 수생태계 내 잔류여부에 대한 조사도 수행되기 시작했다. 최근에는 이러한 물질의 관리를 위한 생태계 내 분포 조사 및 배출 계수 산정을 위한 연구사업이 수행되고 있는데 해당 연구 사업에서는 세정제, 접착제, 염색제, 방향제 등을 비롯한 화장품이나 세제 등에 포함되는 성분과 살균·소독제를 대상으로 영양단계 내 축적과 전달을 이해하기 위한 물질의 축적과 확대를 포함한다. 본 논문은 최근 발표된 생활화학제품기인 유해물질의 수환경 유입 및 분포에 대한 연구 결과를 정리하고 그 과학적 의미를 제시하며 또한 국내외 수행되고 있는 수환경 모니터링 기법에 대한 연구의 예를 바탕으로 현재 유해화학물질의 수환경 내 잔류 농도 및 분포, 생태계 모니터링을 위한 연구의 방향을 제안하고자 한다. 특히 어류를 대상으로 하는 조사에서 국내 수역에 서식하는 주요 어류조사 및 이를 바탕으로 한 대상 어류 선정의 필요성과 인체 위해성 연구의 필요성 등 시기적으로 요구되는 연구를 위한 영양단계 해석과 생물확대계수 연구의 방향을 소개하며 향후 국내에서 수행되고 있는 생물상 모니터링과 화학물질 연구에 대한 제언을 포함한다.

• Journal of the Korean Wood Science and Technology
• /
• 제48권1호
• /
• pp.86-94
• /
• 2020

This study serves as basic research for the development of a new wood-based building finishing material that improved the weakness of inorganic materials such as gypsum board and magnesium board widely used as interior finishing materials and brought out the strength of the wood. The results of evaluating the physical and mechanical properties and the environmental effect related to hazardous substance discharge having manufactured a wood-magnesium laminated composite are as follows. The thermal conductivity and thermal resistance of WML board was improved by about 28~109 percent over magnesium board due to the low thermal conductivity of wood. The adhesive strength of WML board showed a similar result to that of plywood as it exceeds 0.7N/㎟, the adhesive standard of wood veneer which is presented by KS F 3101. Bending strength and screw holding strength were more improved by manufacturing WML board than magnesium board. The WML board manufactured in this study satisfied the criteria for emissions of hazardous substances prescribed in the Indoor Air Quality Control Act, and confirmed the possibility of development as a new wood-based composite material that can replace existing inorganic materials.

• 통상정보연구
• /
• 제11권1호
• /
• pp.379-403
• /
• 2009

The Purpose of this study is to research the problems of trade restriction for an environment protection. Environmental regulation relate to trade are Convention on International Trade in Endangered Species of Wild Fauna & Flora, Montreal Protocol on Substances that Deplete the Ozone Layer, Kyoto Protocol to the UN Framework Convention on Climate Change, Basel Convention on the Control of Transboundary Movements of Hazardous Wastes & Their Disposal, Cartagena Protocol on Biosafty and WTO Agreement. Regulatory action for environmental protection has economics instrument, command & control, liablity, damage compensation, voluntary agreement. In the case of our country, impact of regulatory action for environmental protection is low. Because is recognized position of developing country yet. For in the balance rules of trade and enviroment, First must satisfy WTO's basic principles and principle of quantitative restrictions prohibition, Second, operation of protection action must reasonable and objective standards Third, must satisfy GATT article 20 (b) clause and (g) protestation each essential factor To grow for environment advanced country, we should do i) using of FTA ii) international cooperation strengthening for developing country position iii) construction of environment information network

• 한국환경농학회지
• /
• 제28권2호
• /
• pp.194-201
• /
• 2009

영농지역에서 비점오염원인 농약의 살포가 수질환경에 미치는 영향과 유출량을 평가 하였다. 충북 괴산군 괴산읍 능촌리 일대 폐쇄권역에서 소수계내 물 중 잔류농약은 20종의 성분이 검출되었으며, 살균제 4종, 살충제 10종, 제초제 6종이었고, 검출범위는 0.008${\sim}$7.59 ppb 수준으로 배출수 기준보다 훨씬 못 미치는 수준이었다. 대하천 유입전 소수계 물 중 시기별 잔류농약 성분은 살균제가 5${\sim}$8월, 살충제는 7${\sim}$8월 및 제초제는 5${\sim}$7월에 주로 검출되었고, 밭에 사용하는 농약보다 수도용 농약이 검출 빈도가 높았다. 또한 강우강도가 높을 때는 밭토양의 토사 유출로 밭에 사용하는 농약이 상대적으로 높게 검출되었다. 작물 재배조건별 검출된 잔류농약성분은 고추밭 토양 6종, 과수원 토양 4종, 참깨밭 토양 3종 및 논토양 5종으로 총 13종이 검출되었으며, 검출 범위는 0.001${\sim}$0.109 ppm 수준이었다. 공주시 정암면 고성리 영농지역의 소수계내 물 중 농약잔류성분은 13종(살균제2, 살충제6, 제초제5)의 성분이 검출되었으며 검출범위는 0.01${\sim}$7.21ppb 수준으로 잠정 배출수 기준보다 못 미치는 수준이었다. 농약 종류별 검출양상은 살균제는 5${\sim}$8월, 살충제는 7${\sim}$8월, 제초제는 5${\sim}$6월에 주로 검출되었으며 강우시간별 물 중 농약잔류량은 강우시작 3${\sim}$5시간에 최고농도가 검출되었고 수도용 농약의 검출 빈도가 높았다.

• 한국산업보건학회지
• /
• 제27권4호
• /
• pp.257-268
• /
• 2017

Objectives: This study was conducted to review the Toxic UseReduction Act of Massachusetts, USA, which has been evaluated as a successfulcase of a chemical reduction policy, and to search for ways to introduce it inKorea. Methods: We analyzed the implementation of the TURA by attending TUR Planning Course of the Toxic Use Reduction Institute in Massachusetts and researching the related literature. Results: As TURA took effect, the use of chemicals in Massachusetts was reduced, and cost savings were achieved in workplaces. The success factors for the legislation are considered to be support form the federal and state governments and the active participation of business and civic group. Domestic efforts to reduce toxic substances have already begun, so if the process of TURA is appropriately applied to domestic legislation of chemicals control, it would be expected to produce visible results. Therefore, we reviewed the 'Act on Chemicals Registration and Assessment', 'Act on Chemical Control' and 'Act on the Integrated Control of Pollutant-Discharging Facilities' and sought solution for applying TURA to each piece of legislation. For the first case, 'Toxic or Hazardous Substance List' and 'Establishment of Toxic Use Fee' is applicable. For the second case, 'Annual Toxic or Hazardous Substance Reports' is applicable. For the third case, 'Toxic Reduction Plans' and 'Toxics Use Reduction Institute and 'Toxic Use Reduction Planners' is applicable. Conclusions: The government should take notice appropriateness for the reduction of toxic chemicals and provide financial support. Businesses should invest in technologies that build trust with local communities, improve productivity, and reduce costs. Finally, civic group should cooperate with government and businesses.