• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.3A
• /
• pp.215-222
• /
• 2011

In this paper, we propose a power control scheme for effective serving cell selection in Relay environment of 3GPP (3rd Generation Partnership Project) LTE (Long Tenn Evolution)-Advanced system. A conventional serving cell selection scheme which does not use channel states of backhaul link has a problem that this scheme does not select serving cell supporting maximum throughput. Also, conventional proposed serving cell selection schemes that eNB or RN transmits channel states of backhaul link have problems that conventional schemes need to additional data transmission, serving cell selection process complexity is increased because UE considers channel states of backhaul link, and received signal is degraded because strong interference which is transmission signal from RN. Therefore, for solve these problems, we propose power control scheme that RN control transmission power according to received SINR (Signal to Interference plus Noise Ratio) of backhaul link. By extensive computer simulation, we verify that the power control Relay scheme is attractive and suitable for the Relay environment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.1
• /
• pp.109-114
• /
• 2014

Recently the operating system share of linux on embedded system is increasing. The embedded systems on linux environment, commonly equip a file system as mini hard disk or flash memory to keep data. The types of the file system of the system are various according to it's operating system. Anyway, the more embedded system depends on the file system, the selection of the type of the file system effects more on the performance of the system. This thesis performs the performance benchmark of a FAT and Ext file systems which are most popular in embedded system. As the result, it is discussed that what file system is better at which case. These results will be a index at the selection of flash file system of the embedded systems on linux environment.

• KIEAE Journal
• /
• v.16 no.6
• /
• pp.21-27
• /
• 2016

Purpose: The research is focused on the 25th King Cheoljong's mother's parents' traditional House in Ganghwa-do, for finding out how the surrounding natural environment was considered with Pungsu, a traditional ecological architectural science in case of site selection and architectural planning by the relative of royal family of Joseon period. Method: The study is processed as follows. Human Environment of the region where the house is located, is analyzed in chapter 2. Feature of mountain expressed as dragon and four important hills of the house are analyzed in chapter 3, Highly regarded factors for site selection by the scholar of the Realist School of Confucianism such as wind environment, the front and back of the Hyunmubong and building orientation are analyzed in chapter 4. Finally Pungsu applied in architectural space is analyzed in chapter 5. Result: The house considered Pungsu to some extent, but it shows the appearance contrary to the Pungsu in a certain part in order to show authority and proud as the house of the relatives of the King. It can be seen that the degree of application of Pungsu may be different depending on the will of the building owner.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.9
• /
• pp.3120-3137
• /
• 2021

Small-sized IoT wireless sensing devices can be deployed with small aircraft such as drones, and the deployment of mobile IoT devices can be relocated to suit data collection with efficient relocation algorithms. However, the terrain may not be able to predict its shape. Mobile IoT devices suitable for these terrains are hopping devices that can move with jumps. So far, most hopping sensor relocation studies have made the unrealistic assumption that all hopping devices know the overall state of the entire network and each device's current state. Recent work has proposed the most realistic distributed network environment-based relocation algorithms that do not require sharing all information simultaneously. However, since the shortest path-based algorithm performs communication and movement requests with terminals, it is not suitable for an area where the distribution of obstacles is uneven. The proposed scheme applies a simple Monte Carlo method based on relay nodes selection random variables that reflect the obstacle distribution's characteristics to choose the best relay node as reinforcement learning, not specific relay nodes. Using the relay node selection random variable could significantly reduce the generation of additional messages that occur to select the shortest path. This paper's additional contribution is that the world's first distributed environment-based relocation protocol is proposed reflecting real-world physical devices' characteristics through the OMNeT++ simulator. We also reconstruct the three days-long disaster environment, and performance evaluation has been performed by applying the proposed protocol to the simulated real-world environment.

• The Journal of Society for e-Business Studies
• /
• v.17 no.1
• /
• pp.53-74
• /
• 2012

This study developed a method for selection of available human resources for incomingjob allocation that considers factors affecting resource performance in the business process management (BPM) environment. For many years, resource selection has been treated as a very important issue in scheduling due to its direct influence on the speed and quality of task accomplishment. Even though traditional resource selection can work well in many situations, it might not be the best choice when dealing with human resources. Humanresource performance is easily affected by several factors such as workload, queue, working hours, inter-arrival time, and others. The resource-selection rule developed in the present study considers factors that affect human resource performance. We used a Bayesian Network (BN) to incorporate those factors into a single model, which we have called the Bayesian Selection Rule (BSR). Our simulation results show that the BSR can reduce waiting time, completion time and cycle time.

• Journal of Agricultural Extension & Community Development
• /
• v.25 no.1
• /
• pp.45-56
• /
• 2018

This study analyzed the selection factors for cultivation practices in paddy rice farming. For the study, conjoint model with part-worth utility was adopted, where model profiles included three attributes of yield, production cost, and cultivation difficulties and two levels for each attribute. The value of each level was set up with experimental data obtained from National Institute of Crop Science. Ninety three rice farmers, who joined Korea Rural Economic Institute as farmer correspondences, were surveyed through internet with the profiles selected by factorial design. Result showed that rice farmers considered cultivation difficulties as the most important selection factor to adopt new cultivation practices followed by production cost and yield in consecutive order. This results were robust in spite of past experiences with new practices, willingness to adopt new practices in the future, imitative nature and government interventions.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.56 no.3
• /
• pp.193-201
• /
• 2020

The mesh selectivity of a drum shaped pot for finely-striate buccinum (Buccinum striatissimum) was conducted a total of eight times with four different mesh sizes (22, 35, 50 and 60 mm) from May to September, 2019 in the eastern coastal waters of Korea. The size selectivity analysis was estimated by the SELECT method to express logistic selectivity curves. In the results, the catch of finely-striate buccinum was occupied about 90% in the total catch weight. The equation of the master curve of selectivity was estimated to s(R) = exp(-7.778R+9.983)/[1+exp(-7.778R+9.983)]. The relative shell height of 50% selection was 1.284 and the selection range (SR) was 0.282. The optimal mesh size for 50% selection on the minimum maturation size (75 mm, Shell height) was estimated more than 60 mm by the master selectivity curve.

• Journal of Korean Society for Atmospheric Environment
• /
• v.17 no.4
• /
• pp.331-345
• /
• 2001

The increase of carbon monoxide in the ambient air due to the emissions from point sources without control was estimated using three -dimensional numerical models. The target area was Ulsan where one of the largest industrial complexes was located. As a typical example using numerical models for air quality impact analysis of criteria pollutants that will determine whether the air quality standards would be exceeded or not, the following approaches were suggested. They include: (1) investigation of pre-existing atmospheric conditions, (2) identification of major factors causing high concentrations, (3) selection of episode days. (4) preparation of three-dimensional meteorological data, (5) confirmation of agreement between measured and predicted concentrations in the emission conditions of episode days, and (6) estimation of the impact due to changes of the emission conditions. In the present work, daily meteorological conditions for the specific period were classified into four clusters of distinctive features, and the episode days were selected individually from each cluster. Emphasis was placed on the selection of episodes representing meteorological conditions conducive to high concentrations especially for point sources that were sensitive to the wind direction variations.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.11
• /
• pp.3008-3025
• /
• 2012

In this paper, the downlink resource allocation of OFDMA system with decode-and-forward (DF) relaying is investigated. A non-convex optimization problem maximizing system throughput with users' satisfaction constraints is formulated with joint relay selection, subcarrier assignment and power allocation. We first transform it to a standard convex problem and then solve it by dual decomposition. In particular, an Optimal resource allocation scheme With Time-sharing (OWT) is proposed with combination of relay selection, subcarrier allocation and power control. Due to its poor adaption to the fast-varying environment, an improved version with subcarrier Monopolization (OWM) is put forward, whose performance promotes about 20% compared with that of OWT in the fast-varying vehicular environment. In fact, OWM is the special case of OWT with binary time-sharing factor and OWT can be seen as the tight upper bound of the OWM. To the best of our knowledge, such algorithms and their relation have not been accurately investigated in cooperative OFDMA networks in the literature. Simulation results show that both the system throughput and the users' satisfaction of the proposed algorithms outperform the traditional ones.

• Journal of Information Technology Services
• /
• v.12 no.3
• /
• pp.23-37
• /
• 2013

Social commerce is a subset of e-commerce that involves using social media, and user contributions to assist in the online buying and selling of products and services. Given the rapid growth of social commerce sites such as Groupon, Ticketmonster, and Coupang, it has become critical to understand customer purchasing decision-making processes in the social commerce environment. This study developed a theoretical model to examine the role of social commerce site's stickiness in customers' repurchasing decision processes. This study identifies price attribute, variety of selection, shopping enjoyment, and anger as the key factors of social commerce site's stickiness. Data collected from 164 users who had more purchasing experiences with social commerce for more than 7 months were empirically tested against the research model. The analysis results indicate that social commerce site's stickiness plays an important role in enhancing customer's purchasing behavior. Moreover, price attribute and shopping enjoyment significantly influence social commerce site's stickiness, whereas anger does not significantly affect consumer purchasing decision-making processes. However, contrary to our expectation, variety of selection negatively influences social commerce site's stickiness. The theoretical and practical implications of the findings are described.