• Title/Summary/Keyword: entry/exit toll

Search Result 9, Processing Time 0.03 seconds

Analysis of Open Toll Segments in Urban Freeways (개방식고속도로 통행특성과 영업체계 전환분석)

  • Nam, Du-Hui
    • Journal of Korean Society of Transportation
    • /
    • v.25 no.5
    • /
    • pp.101-109
    • /
    • 2007
  • Two variations of toll roads exist: mainline toll plazas and entry/exit tolls. On a mainline toll system(open toll scheme), all vehicles stop at various locations along the highway to pay a toll. While this may save money from the lack of need to construct tolls at every exit, it can cause lots of traffic congestion, and drivers could evade tolls by going around them. With entry/exit tolls, vehicles collect a ticket when entering the highway, which displays the fares it will pay when it exits, increasing in cost for distance travelled. Upon exit, the driver will pay the amount listed for the given exit. The pressures on the Seoul ring roadway network have been changing over time. In the past, the emphasis was on mobility and maintenance of the road network to provide an efficient transportation network, but recently, road use has outstripped the network's ability to extend and expand the road network and hence the policy emphasis has moved towards reducing free riders rather than mitigating its effects. In addition to this pressure is an incidental pressure, which argues that provision of free ride segments generates further traffic in isolation of other factors. This paper is examining policies to reduce the burden of traffic congestion in Seoul ring roadway which is used open toll scheme for decades. One key mechanism to achieve this policy aim is automatic charging mechanism on freeway, but if a nation-wide electronic toll collection is to be implemented successfully, there are a number of prerequisites which must be place.

Generalized K Path Searching in Seoul Metropolitan Railway Network Considering Entry-Exit Toll (진입-진출 요금을 반영한 수도권 도시철도망의 일반화 K-경로탐색)

  • Meeyoung Lee
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.21 no.6
    • /
    • pp.1-20
    • /
    • 2022
  • The basic way to charge vehicles for using road and public transport networks is the entry-exit toll system. This system works by reading Hi-Pass and public transportation cards of the vehicles using card readers. However, the problems of navigating a route in consideration of entry-exit toll systems include the non-additive costs of enumerating routes. This problem is known as an NP-complete task that enumerates all paths and derives the optimal path. So far, the solution to the entry-exit toll system charging has been proposed in the form of transforming the road network. However, unlike in the public transport network where the cards are generalized, this solution has not been found in situations where network expansion is required with a transfer, multi-modes and multiple card readers. Hence, this study introduced the Link Label for a public transportation network composed of card readers in which network expansion is bypassed in selecting the optimal path by enumerating the paths through a one-to-one k-path search. Since the method proposed in this study constructs a relatively small set of paths, finding the optimal path is not burdensome in terms of computing power. In addition, the ease of comparison of sensitivity between paths indicates the possibility of using this method as a generalized means of deriving an optimal path.

A Development of the Design Guidelines for Connecting Roads in Highway Rest Area (고속도로 휴게소 연결로 설계 기준 설정에 관한 연구)

  • Lee, Choulsoo;Won, Jaimu
    • International Journal of Highway Engineering
    • /
    • v.15 no.1
    • /
    • pp.143-154
    • /
    • 2013
  • PURPOSES: Design of approach roads of rest areas in highway has many drawbacks such as geometric design elements. There has been traffic accidents occured in these approach roads of rest areas. Thus, design criteria is required in order to protect accidents from being occurred. In case of Korea, geometric structure design criteria of entry facilities, such as toll-gate, interchange, junction etc was established. However there are no presence in a detailed standards for geometric structure of the rest area which affiliated road facilities. METHODS: In this study, analytic on accidents was carried out in regards to the entry of geometric structure of resting areas by utilizing a sight survey and an investigation research of traffic accidents. The survey was targeting 135 general service areas. Collisions with physical channelization and safety facilities occurred due to speeding, rapid entry, and etc at the entrance nose section. At the entrance connector roads, accidents caused by speeding, negligence, over-operation of handle of drivers were main reason of accidents. Discriminant analysis were conducted about geometric elements to distinguish influencing factors for traffic accidents. the lengths and access angles of the entrance connector roads were regarded as to have the high relation with traffic accidents. RESULTS: After classifying the design section of resting areas' entry as well as derive design elements on each section, a speed measurement by targeting entry of rest areas and car behavior surveys were performed, then each element's minimum standard was derived through the analyses. According to the speeds at the starting/end point of entrance connector road, the range of the junction setting angle of the entrance connector road is defined as $12^{\circ}{\sim}17^{\circ}$ and the connector length model was suggested. CONCLUSIONS: Suggest improvement plans for existing rest areas that can be applied realistically. This should be corresponded to the standards of entry and exit of developed rest areas.

Outlier Filtering and Missing Data Imputation Algorithm using TCS Data (TCS데이터를 이용한 이상치제거 및 결측보정 알고리즘 개발)

  • Do, Myung-Sik;Lee, Hyang-Mee;NamKoong, Seong
    • Journal of Korean Society of Transportation
    • /
    • v.26 no.4
    • /
    • pp.241-250
    • /
    • 2008
  • With the ever-growing amount of traffic, there is an increasing need for good quality travel time information. Various existing outlier filtering and missing data imputation algorithms using AVI data for interrupted and uninterrupted traffic flow have been proposed. This paper is devoted to development of an outlier filtering and missing data imputation algorithm by using Toll Collection System (TCS) data. TCS travel time data collected from August to September 2007 were employed. Travel time data from TCS are made out of records of every passing vehicle; these data have potential for providing real-time travel time information. However, the authors found that as the distance between entry tollgates and exit tollgates increases, the variance of travel time also increases. Also, time gaps appeared in the case of long distances between tollgates. Finally, the authors propose a new method for making representative values after removal of abnormal and "noise" data and after analyzing existing methods. The proposed algorithm is effective.

Effect of Passenger Car Fuel Consumptions and Fuel Cost Savings by Hi-Pass System (하이패스 이용시 승용차 연료소모 및 연료비용 절감효과)

  • Kwak, Jin-Ho;Kim, Dong-Nyong;Jeong, Ae-Ra
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.14 no.1
    • /
    • pp.94-102
    • /
    • 2015
  • The high-pass(brand name of Electronic Toll Collection System) utilization trend on the highway continues to grow as 59.4% (by the end of 2013). In this study, we applied the carbon balance method using a fuel chassis dynamometer with the four passenger car classes in order to measure the fuel consumption of the car using the expressway tollgate. We experimented 18 driving mode at general tollgate and high-pass tollgate. As a result, in case of entry/exit toll there were 21.0~56.4ml/veh fuel consumption savings, in case of open toll fuel consumption savings was analyzed as 10.5~28.1ml/veh. In addition, the annual fuel cost savings by virtue of high-pass was 28.2~57.3 billion won at 70% utilization rate, 32.2~65.5 billion won at 80%, 36.2~73.7 billion won at 90% and 40.3~81.9 billion won at 100%.

Improvement of Hi-Pass Users' Satisfaction Using Modified Importance Performance Analysis (M-IPA 기법을 이용한 하이패스 만족도 제고 방안)

  • Choi, Yoon-Hyuk;Ko, Han-Geom;Yun, Ilsoo;Kim, Dong-In
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.15 no.1
    • /
    • pp.52-65
    • /
    • 2016
  • The electronic toll collection system(ETCS), is globally used in about 40 countries. In Korea, the Korea Expressway Corporation led the nationwide introduction of the ETC system in 2007 under the brand name of the Hi-pass. Since then, Hi-pass, with its rate of average daily use reaching about 70%, has become an essential facility in Korean expressways. To identify users' perception on Hi-pass (satisfaction, preference, etc.), this study conducted a Modified Importance-Performance Analysis (M-IPA). With this, this study attempted to identify the kind of efforts necessary to enhance current Hi-pass users' convenience and satisfaction. According to the result of M-IPA, the items including "non-stop payment" and "toll discount" are identified as key items that require further improvement. For improvement in the "non-stop payment" item, operations of Hi-pass toll booths appropriate for the demand for Hi-pass use and the selection of Hi-pass booths' locations in consideration of entry and exit lanes need to be improved. In addition, with regard to the "toll discount" item, although toll discount is currently provided to Hi-pass users, thus, PR thereof will have to be strengthened. It is expected that this study will be used as basic data to devise methods of enhancing Hi-pass usage through improvement of Hi-pass users' satisfaction.

Developing Design Guidelines for Rest Area Based on the Traffic Safety (교통안전을 고려한 고속도로 휴게소 설계기준 개발)

  • Lee, Hyun-Suk;Lee, Eui-Eun;Seo, Im-Ki;Park, Je-Jin
    • International Journal of Highway Engineering
    • /
    • v.14 no.3
    • /
    • pp.173-182
    • /
    • 2012
  • Entry and exits of the rest area are sections where designed speed can be rapidly change and also a weak traffic safety section. In addition, two tasks can be performed simultaneously at entry of the rest area, particularly searching for deceleration and parking spaces/parking sides etc. Thus, design criteria is required in order to procure the stability of accessed vehicle. In case of Korea, geometric structure design criteria of entry facilities, such as toll-gate, interchange, junction etc was established. However there are no presence in a detailed standards for geometric structure of the rest area which affiliated road facilities. In this study, Derive problems in regards to the entry of geometric structure of resting areas by utilizing a sight survey and an investigation research of traffic accidents. The survey was targeting 135 general service areas. After Classifying the design section of resting areas' entry as well as derive design elements on each section, a speed measurement by targeting entry of rest areas and car behavior surveys were performed, then each element's minimum standard was derived through the analyses. According to the speeds at the starting/end point of entrance connector road, the minimum length of the entrance connector road is decided as 40m using Slowing-down length formula and based on the driving pattern, the range of the junction setting angle of the entrance connector road is defined as $12^{\circ}{\sim}17^{\circ}$. Suggest improvement plans for existing rest areas that can be applied realistically. This should be corresponded to the standards of entry and exit of developed rest areas.

Exploring the Temporal Relationship Between Traffic Information Web/Mobile Application Access and Actual Traffic Volume on Expressways (웹/모바일-어플리케이션 접속 지표와 TCS 교통량의 상관관계 연구)

  • RYU, Ingon;LEE, Jaeyoung;CHOI, Keechoo;KIM, Junghwa;AHN, Soonwook
    • Journal of Korean Society of Transportation
    • /
    • v.34 no.1
    • /
    • pp.1-14
    • /
    • 2016
  • In the recent years, the internet has become accessible without limitation of time and location to anyone with smartphones. It resulted in more convenient travel information access both on the pre-trip and en-route phase. The main objective of this study is to conduct a stationary test for traffic information web/mobile application access indexes from TCS (Toll Collection System); and analyzing the relationship between the web/mobile application access indexes and actual traffic volume on expressways, in order to analyze searching behavior of expressway related travel information. The key findings of this study are as follows: first, the results of ADF-test and PP-test confirm that the web/mobile application access indexes by time periods satisfy stationary conditions even without log or differential transformation. Second, the Pearson correlation test showed that there is a strong and positive correlation between the web/mobile application access indexes and expressway entry and exit traffic volume. In contrast, truck entry traffic volume from TCS has no significant correlation with the web/mobile application access indexes. Third, the time gap relationship between time-series variables (i.e., concurrent, leading and lagging) was analyzed by cross-correlation tests. The results indicated that the mobile application access leads web access, and the number of mobile application execution is concurrent with all web access indexes. Lastly, there was no web/mobile application access indexes leading expressway entry traffic volumes on expressways, and the highest correlation was observed between webpage view/visitor/new visitor/repeat visitor/application execution counts and expressway entry volume with a lag of one hour. It is expected that specific individual travel behavior can be predicted such as route conversion time and ratio if the data are subdivided by time periods and areas and utilizing traffic information users' location.

Constructing Transfer Data in Seoul Metropolitan Urban Railway Using Transportation Card (교통카드기반 수도권 도시철도 환승자료 구축방안)

  • Lee, Mee Young;Sohn, Jhieon;Cho, Chong Suk
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.15 no.4
    • /
    • pp.33-43
    • /
    • 2016
  • Public transportation card data, which is collected for purposes of the Integrated Public Transportation Fare System, provides neither transfer time nor transfer frequency occurring on the metropolitan city-rail (MCR). And because there are no transfer toll gates installed on the MCR, data on transfers between lines are estimated through means such as elicitations using survey questionnaire, or otherwise through macroscopic observations, which poses the risk of transfer time and frequencies being underestimated. For the accurate estimation thereof, an explanation of the transit path that arises between the Entry-and Exit-Gates must be provided. The purpose of this research is twofold : 1) to build a transit path model to reflect the current state of transfer movements on the basis of transportation card reader data, and 2) to deduce information on transfers occurring in the greater metropolis. To achieve these aims, the idea of Big Nodes is introduced in the model to align transportation card reader operation system characteristics with those of the MCR network. The link-label method is applied in the model as well to make certain that the MCR network runs in an effective manner. Administrative information obtained by the transportation card reader is used to derive transfer time and frequency both in the city's mid-zones, and in the Seoul-Gyeonggi-Incheon district's large-zones. Public transportation card data from a single specific day in year 2014 is employed in the building of the quantified transfer specific data. Extended usage thereof as providing comprehensive data of transfer resistance on the MCR is also examined.