• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2006년도 춘계 종합학술대회 논문집
• /
• pp.285-289
• /
• 2006

현재 국내에서 카툰(Cartoon)은 풍자(諷刺)와 유머를 바탕으로 한 호흡이 짧은 내용의 만화(漫畵)를 통칭한 용어로 사용한다. 오늘날 카툰의 표현양식은 전통적 표현양식과 더불어 디지털을 통한 표현양식들을 적극적으로 활용하기도 하고 미술의 표현양식인 판화나 동양화적 느낌을 차용하여 표현하고 있으며 컵, 핸드백 등 오브제(object)를 활용한 입체적 표현양식의 카툰도 있다. 본 연구는 촉각적 감각을 가미한 입체적 표현 양식으로 카툰의 영역확장이 가능하다는 전제 하에 이루어졌다. 또한, 본 논문의 목적은 카툰의 새로운 표현 양식을 통해 카툰의 콘텐츠 산업화와 에듀테인먼트로서의 가능성을 제언하는데 있으며, 카툰의 새로운 영역확장에 필요한 기초적 학문 연구의 토대가 되는 데 있다.

• 한국레이저가공학회지
• /
• 제11권1호
• /
• pp.1-6
• /
• 2008

We proposed new light guide panel (LGP) fabrication method exploiting laser-processed inner scatterers and surface pattern. The proposed method has achieved LGP performance improvement in both brightness and uniformity. The inner scatterers and surface pattern of grid type were fabricated with a 2nd harmonic Nd:YAG pulse laser engraving system and a $CO_2$ laser scanning system, respectively. In the implementation of LGP, inner scatterers was arranged in accordance with linear or curved pattern with changing density and surface pattern was engraved on the surface of an inner-scatterers embedded LGP. The increase of scatterers' density and the use of surface patterns in both linear and curved pattern provided high luminance and uniformity enhancement. While thecurved pattern incorporated with increased scatterers' density and surface patterns yielded brightness improvement with preserving good uniformity, the linear pattern showed highly localized brightness near the light entrance of the LGP. We can also observe that the uniformity was mainly determined by pattern of inner scatterers, and the brightness was improved by the higher density and the utilization of surface patterns. From the results, the use of laser-processed inner and surface patterns can be a potential alternative for efficient and simple LGP fabrication method.

• 한국실내디자인학회논문집
• /
• 제13권6호
• /
• pp.158-166
• /
• 2004

This study aims to analyze how the color of Korean traditional architecture affects its plasticity. The researcher took (our distant and near photographs of each representative building of each use, measured the colors, and analyzed these using the color perception theory. The results are summarized as follows: 1. When perceiving the entire plasticity of a building, the color of Korean traditional architecture reduces the heavy feeling that may be brought about by the roof's weight, but stresses the solidity of the pillars. This color perception effect displays the visual stability and balanced plastic beauty of the building's facade. 2. When looking at a building up close, the building's color emphasizes the solidity of the major materials used to construct it through a contrast effect, and highlights the characteristics of each building, such as the dignity of its seal engraving, its magnificence, its simplicity, etc. 3. The color of Korean traditional architecture is a major factor that expresses plastic language as it displays topographical level differences and intercepts or opens view through the artificial division of space, etc., according to the building's use.

• 한국기계가공학회지
• /
• 제2권4호
• /
• pp.33-39
• /
• 2003

The stiffness of multi-articulated industrial robots is very weak, because their structure is an articulated type with some links and joints. Thus it is known that cutting processes for metals are not accepted in machine shop well, but they have a lot of merits for cutting processes, for example, drilling, tapping, and engraving etc, because of the characteristics of their high degree of freedom. The temptation of cutting aluminium was carried out to investigate the feasibility and the limitations or constraints for cutting metals on them. First the mode shapes of 6 degree of freedom welding robot were taken and analysed, and next the cutting processes were practically carried out on it. The results of study were found out to show the feasibility of cutting processes at drilling under 6mm of tool diameter, as well as to have some limitations and constraints, for examples, feed rate, depth of cut and cutting force etc.

• 한국생산제조학회지
• /
• 제19권2호
• /
• pp.216-223
• /
• 2010

The general way to process the surface by means of the laser was heat treatment for strengthening the surface hardness. They have used the laser for changing the property of the surface, especially for metal. Generally, it is recent increasing tendency to use the thin plate panel for making things smaller and lightweight. However, thin plate should be strengthened or let the thin plate panel have moment of inertia by means of engraving the groove or wave on them for lightweight and strengthening. Therefore it is expected that the thin plate panel can be harder and more stable through processing the metal surface by laser beam irradiation and the hardness of thin plate possibly can be also changed how many parts of them are harden. Through this research, it can be grasped how the hardness and mechanical characteristic changes according to width and depth of groove by laser affect the max stress by the ratio of $A_H/A_T$ (hardening area/total area) and characteristic of displacement and structural characteristic for making the thin plate harder by the strengthening metal surface of thin plate by laser through the experiment and analysis of FEA can be presented.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.9-10
• /
• 2005

We report on the fabrication and characterization of self- and artificially-controlled ZnO nanostructures have been investigated to establish nanostructure blocks for ZnO-based nanoscale device application. Systematic realization of self- and artificially-controlled ZnO nanostructures on $SiO_2/Si$ substrates was proposed and successfully demonstrated utilizing metalorganic chemical vapor deposition (MOCVD) in addition with a focused ion beam (FIB) technique. Widely well-aligned two-dimensional ZnO nanodot arrays ($4{\sim}10^4$ nanodots of 130-nm diameter and 9-nm height over $150{\sim}150{\mu}m^2$ with a period of 750 nm) have been realized by MOCVD on $SiO_2/Si$ substrates patterned by FIB. A low-magnification FIB nanopatterning mode allowed the periodical nanopatterning of the substrates over a large area in a short processing time. Ga atoms incorporated into the surface areas of FIB-patterned nanoholes during FIB engraving were found to play an important role in the artificial control of ZnO, resulting in the production of ZnO nanodot arrays on the FIB-nanopatterned areas. The nanodots evolved into dot clusters and rods with increasing MOCVD growth time.

• 한국가구학회지
• /
• 제27권2호
• /
• pp.145-153
• /
• 2016

Today, furniture design, which is changing and diversified, a movement to search a new formative world while reviving our traditionality is continuously proceeded, that implies a new possibility in our culture. In respect of such diversified materials, Korean traditional paper, Hanji (韓紙), has already been acknowledged with its excellence. Also, Hanji is a material that fully contains aesthetic consciousness of Korean people, accordingly, this research investigated and analyzed mainly with Sarangbang furniture among Joseon antique furniture, in order to study the possibility of Hanji decorated furniture as the objet in our interior space. This research utilized Paper cut technique (剪紙技法) among Hanji Crafts technique of expressive elements of Sarangbang furniture using Hanji, which is to make patterns and attach them by cutting out or engraving colored papers using scissors or graver to the wooden frame (白骨). Through this, this research could investigate production process utilizing Paper cut technique, also, Sarangbang furniture utilizing such Paper cut could be settled down as the objet with functional aspect and aesthetic completion in our interior space. Also, the researcher presents value of our original furniture by suggesting final output and considers that systematic researches should be conducted continuously on furniture henceforth utilizing Paper cut technique.

• 소성∙가공
• /
• 제22권8호
• /
• pp.437-441
• /
• 2013

Recently, the engraving of letters or a pattern on a product surface has received more attention especially in trying to satisfy the customer requirements. Half-piecing is a protrusion forming process that pierces only 40~50% of the material thickness. In the current study, the half-piercing technique for making clear letters by protruding sheet material was selected and studied. The influence of clearance and penetration depth was investigated by measuring the camber and extruded length of a protrusion after experiments. In addition, a numerical analysis was performed for the same working conditions and compared with experimental results. It is shown that, as the clearance increases, the camber of a protrusion increases rapidly and the extruded length decreases slightly. The deformation pattern around the cutting edge during half-piercing changes from an extrusion mode to a shearing mode as the clearance changes from minus to plus values. It is also confirmed that the experimental results show a good agreement with the numerical analyses.

• 한국의사학회지
• /
• 제21권2호
• /
• pp.123-133
• /
• 2008

The Meridian and Collateral Diagram is one of the most important 圖像s of Traditional Korean Medicine. A 圖像 is a picture made on a two-dimensional surface using lines and colors to portray an object or an image. Meridian and Collateral diagram is a 圖像 of the human body with indications of acupoints and meridian passageways and have different names such as 經穴圖, 輸穴圖, 鍼灸圖, 明堂圖, 銅人圖, in accordance with its classification. The documental basis of the Meridian and Collateral Diagram is the Internal Classic and the very first Meridian and Collateral Diagram confirmed through textual evidence can be found in 葛洪's "抱朴子 雜應". The Korean 동인도 in existence today, called '銅人明堂之圖', exists in two versions; a hand-copied version and a wooden engraving block version. It displays all the locations of the acupoints located on the anterior side of the human body, labels the names of the acupoints, and specifically distinguishes 起始穴 and 終止穴 of the eight meridian vessels.

• 한국의류학회지
• /
• 제31권1호
• /
• pp.107-118
• /
• 2007

The purpose of this study is to examine the realities of the chaotic use of terms, 'tattoo' and 'moonsin', through the empirical field researches. This paper will research the differences in the origins and the etymological meanings of 'tattoo' and 'moonsin' through examining related literatures. Clarifying the term definitions on 'tatto' and 'moonsin', this research is to help fashion consumers to use these terms discretely. In order to figure out consumers' perceptive attitude, this study has performed the questionnaire inquiry and has reached the result by analyzing the level of frequency of using the two terms. 1. The result of the term-preference inquiry tells that consumers prefer 'tattoo' to 'moosin'. However, the inquiry shows considerable number of them use the two terms indiscretely. 2. The study on the perceptions from the two terms shows: the term 'tattoo' is often related to positive images-fashionable, charming, and sexy, and the term 'moonsin' to negative ones-violent, anti-social, and demonic. 3. Both 'tattoo' and 'moonsin' shares the similarity in terms of engraving patterns on skin and coloring them. 4. 'Tattoo' is originally derived from the Polynesian word 'tatau', which means 'artistic'. 'Tatau' is a kind of ethnic art practiced on Polynesian people's skin. The design patterns and practicing techniques are very similar to those on the Polynesian earthware called 'Lapita'.