• 한국정밀공학회지
• /
• 제17권8호
• /
• pp.19-25
• /
• 2000

Development of Environmentally conscious products in the electrical appliance industry is necessary not only for environmental law and green consumer but also for competitiveness by cost reduction. In this paper the current trends of evaluation tools are described. And practices in the development of environmentally conscious products are explained and improvement cases are presented by ways of design guides. The paper concludes with suggested future tasks which will need to be addressed in order that product designers can utilize the said tools effectively.

• 한국정밀공학회지
• /
• 제4권3호
• /
• pp.60-68
• /
• 1987

An optoelectronical method for in process monitoring of flank wear of cutting tools is presented. The method is based upon real-time vision technology in which the tool is illuminated by a beam of laser and then the image of wear zone is taken by a vidicon camera. The image is converted to a series of digital pixel data and processed through an algorithm specially developed for measurement of the wear land width. Detailed aspects of the prototype measurement system byilt for experiment are described, and test results are discussed. As conclusions, it is proved that the methods are effec- tive especially for-in situ application with a measuring accuracy of 0.01mm.

• 한국소음진동공학회논문집
• /
• 제20권10호
• /
• pp.891-899
• /
• 2010

Since the working machine generates an excessive loud noise as much as its use-purpose and dimension, those damages are occurring to the exposed workers such as unpleasant sense, stress and occupational hearing-impaired. Accordingly, as one of the measures for prevention such loud noise, various soundproof protection tools were developed. However, such soundproof protection tools were presented the physical measured value only, it is real state that the psychological study result with regard to the soundproof effect which the workers are actually feeling, is not existing. On such point of view, with the object on the typical earplugs and earcaps among the soundproof protection tools, this study has ever tried a subjective evaluation about the degree of soundproof effect through Psycho-acoustics experiment. It is considering that such study result could be utilized as the useful material when establishing the soundproof measure for the workers in the future.

• International Journal of Computer Science & Network Security
• /
• 제21권1호
• /
• pp.162-173
• /
• 2021

The Honeypot is the mechanism that is made to learn more about the attackers like knowing about the method and pattern of attack and is also used to obtain very useful info about all intrusive activities. Honeypots usually categorized according to the interaction's level as (high, medium, low) interaction. The main purpose which is used as honey production and honey research. This paper includes a detailed study of two honeypot tools. The different honey pot findings are put in in this paper to illustrate how honey is working in a real environment and even how it reacts when undesirable interest obtain in this network, and these tools are used to improve the concept of security, protection and confidentiality within or outside the organization to avoid attacks, vulnerabilities and breaches.

• 한국정밀공학회지
• /
• 제13권3호
• /
• pp.56-62
• /
• 1996

This paper presented a new measuring system to improve circular motion accuracy by using two-dimensonal probe and master ring for NC machine tools. This measuring system reduced the circular motion error conspicuously by eliminating the influence of the acceleration/deceleration range and compensating the friction force whose influences were significant while measuring the motion. Experimental results show that this system had enough accuracy to measure a circular motion for NC machine tools, compared with the circular test method and the r .theta. method.

• 한국정밀공학회지
• /
• 제12권2호
• /
• pp.37-47
• /
• 1995

In recent years, it has been variously developed for testing the accuracy of circular motion of NC machine tools, for example Telescoping Ball Bar Method by Bryan, Circular test Method by Knapp and $r^{-{\theta} }$ Method by Tsutsumi etc., but these methods are all 2-dimentional measuring methods on plane. These simple methods of circular motion accuracy test of NC machine tools have been studied by many reserchers as above, but it is not yet settled in the code of measuring methods of motion errors of NC machine tools, because of errors of measuring units and sensors, and also especially the difficulties of centering of measuring units and the spindle of machining center. In this paper, in use of 2 rotary encoders and 1 magnetic type linear scale with resolution of 0.5 .mu. m, it has become possible for measuring of 3 dimentional space motion accuracy.

• Molecules and Cells
• /
• 제45권2호
• /
• pp.76-83
• /
• 2022

Neurons-on-a-Chip technology has been developed to provide diverse in vitro neuro-tools to study neuritogenesis, synaptogensis, axon guidance, and network dynamics. The two core enabling technologies are soft-lithography and microelectrode array technology. Soft lithography technology made it possible to fabricate microstamps and microfluidic channel devices with a simple replica molding method in a biological laboratory and innovatively reduced the turn-around time from assay design to chip fabrication, facilitating various experimental designs. To control nerve cell behaviors at the single cell level via chemical cues, surface biofunctionalization methods and micropatterning techniques were developed. Microelectrode chip technology, which provides a functional readout by measuring the electrophysiological signals from individual neurons, has become a popular platform to investigate neural information processing in networks. Due to these key advances, it is possible to study the relationship between the network structure and functions, and they have opened a new era of neurobiology and will become standard tools in the near future.

• 한국정밀공학회지
• /
• 제11권6호
• /
• pp.86-97
• /
• 1994

An experimental investigation is reported on the wear mechanism of CBN cutting tools. The cutting experiments were conducted on a lathe equipped with a tool dynamometer for cutting force measurement. The investigation of wear mechanism was executed by observing the worn tools using tool microscope and scanning electron microscope. Results indicate that the flank wear occurs dominantly by abrasive wear mode and the crater wear by adhesive wear mode. The results also indicate that the width of flank wear is closely related with the passive component of cutting force.

• 산업기술연구
• /
• 제43권1호
• /
• pp.49-55
• /
• 2023

Cluster tools are extensively employed in various wafer fabrication processes within the semiconductor manufacturing industry, including photo lithography, etching, and chemical vapor deposition. Contemporary fabrication facilities encounter customer orders with technical specifications that are similar yet slightly varied. Consequently, modern fabrications concurrently manufacture two or three different wafer types using a cluster tool to maximize chamber utilization and streamline the flow of wafer lots between different process stages. In this review, we introduce two methods of concurrent processing of multiple wafer types: 1) concurrent processing of multiple wafer types with different job flows, 2) concurrent processing of multiple wafer types with identical job flows. We describe relevant research trends and achievements and discuss future research directions.

• 설비공학논문집
• /
• 제23권2호
• /
• pp.111-119
• /
• 2011

Recently, the performances of speed and accuracy are enhanced in machine tools. The high speed of the machine tools usually causes harmful thermal displacements on the objects. To reduce the thermal displacements, machine tools generally adopt oil coolers with precise temperature control function. This study aims at precise control of oil outlet temperature in the oil coolers with hot-gas bypass manner based on PI control logic. The control system was designed for obtaining steady state error within ${\pm}0.1^{\circ}C$ and maximum overshoot with 0.8% even though abrupt disturbances are added to the system. We showed that the PI gains could be easily decided by numerical simulations using practical transfer function which got experiments. Also, transient characteristics could be improved significantly by reflecting the inlet temperature of an evaporator to the output of a controller feedforwardly considering periodic abrupt disturbances. Through some experiments, excellent control performances were established by the suggested control.