Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

A Survey of Current Practices and Tools in Environmentally Conscious Electrical Appliances

가전에 있어서 친 환경 제품 개발의 평가기술 연구현황

  • Published : 2000.08.01
Download PDF
⟨ Previous Next ⟩

Abstract

Development of Environmentally conscious products in the electrical appliance industry is necessary not only for environmental law and green consumer but also for competitiveness by cost reduction. In this paper the current trends of evaluation tools are described. And practices in the development of environmentally conscious products are explained and improvement cases are presented by ways of design guides. The paper concludes with suggested future tasks which will need to be addressed in order that product designers can utilize the said tools effectively.

Keywords

References

  1. T. Kamei, 'Product Life Cycle of Electrical Appliances,' International journal of Environmentally Conscious & Manufacturing, Vol. 4, No. 1, pp. 43-63, 1995
  2. C. Mizuki, P. Sandborn, and G. Pitts, 'Design for Environment- A Survey of Current Practices and Tools,' IEEE International Symposium on Electronics & the Environment, pp. 1-6, 1996 https://doi.org/10.1109/ISEE.1996.500387
  3. M. J. Hrinyak, and B. Bras, 'Enhancing Design for Disassemble: A Benchmark of DFD Software Tools,' Proceedigns of the 1996 ASME Design Engineering Technical Conference and Computers in Engineering Conference, 1996
  4. Y. K. Kim, Y. J. Kim, J. Hesselbach, and M. Kuhn, 'Assessment of the Product and Process to Improve Disassembly and Recyclability for Design for Environment,' CARE INNOVATION, pp. 116-121, 1996
  5. 김영규, 조규갑, 권성우, '재활용성 향상을 위한 분해성 평가 방법에 관한 연구,' 한국 경영과학회/대한산업공학회'97 춘계공동학술대회, 1997
  6. Y. K. Kim, S. W. Kweon, J. Hesselbach, and M. Kuhn, 'Assembly Tool for Recycling Oriented Product Design and Disassembly Proceed Planning,' 4th IFAC Workshop on Intelligent Manufacturing Systems: IMS '97, pp. 141-145, 1997
  7. H. Srinivasan, and N. Shyamundar and R. Gadh, 'A Virtual Disassembly Tool to support Environmentally Conscious Product Design,' IEEE International Symposium on Electronics & the Environment, pp. 7-12, 1997 https://doi.org/10.1109/ISEE.1997.605198
  8. P. Gu, M. Hashemian, and S. Sosale, 'An Intergrated Modular Design Methodology for Life-Cycle Engineering,' Annals of the CIRP, Vol. 46, No. 1, pp. 71-74, 1997
  9. 김영규, 서정원, 조규갑, '친환경 제품개발을 위한 DFE 평가기술 개발,' 대한산업공학회 98추계학술대회, 1998
  10. S. Brink, J. C. Diehl and A. Stevels, 'ECO- QUEST, An Ecodesign Self Audit Tool for Suppliers of The Electronics Industry,' IEEE International Symposium on Electronics & the Environment, pp. 129-132, 1998 https://doi.org/10.1109/ISEE.1998.675044
  11. P. Sheng, and E. Hertwich, 'Indices for Comparative Waste Assessment in Environmentally Conscious Manufacturing,' Journal of Manufacturing Science and Engineering, Vol. 120, pp. 129-140, 1998
  12. H. C. Zhang, and S. Y. Yu, 'A Quantitative Approach in Environmentally Conscious Product Design Support,' IEEE International Symposium on Electronics & the Environment, pp. 280-285, 1999 https://doi.org/10.1109/ISEE.1999.765890
  13. S. Siddhaye and P. Sheng, 'Environmental Impact and Design Parameters in Electronics Manufacturing- A Sensitivity Analysis Approach,' IEEE International Symposium on Electronics & the Environment, pp. 39-44, 2000 https://doi.org/10.1109/ISEE.2000.857623