• Journal of Electrical Engineering and Technology
• /
• v.12 no.1
• /
• pp.145-150
• /
• 2017

This paper present a unified method of steady state performance analysis and limits characteristics of an autonomous three-phase self-excited induction generator (SEIG) driven by a wind turbine under different types of loads and speeds. The proposed method is based on a new mathematical function to solve for the real and imaginary components of the complex equation of the mathematical model. Performances limits, regulation and characteristics of different configurations will be thoroughly examined and compared. The proposed system will be modeled and simulated and the performance limits characteristics will be compared with variable speed and variable capacity.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.453-456
• /
• 2001

The thrust control characteristics of single-sided linear induction motor (SLIM) is achieved using PI controller in this paper. The trembling of air gap length between the primary winding and the secondary structure of the SLIM must be minimized in order to get quick response results. Also, the input voltage of SLIM is involved with the time harmonics because most SLIM is driven by inverter. According to the feedback linear control system, this paper describes with applying the non-linear control, speed and estimated flux algorithm. At the result of this experiment, we reached to the improvement of thrust characteristics with PI controller.

• Journal of electromagnetic engineering and science
• /
• v.5 no.2
• /
• pp.72-79
• /
• 2005

The leaky dispersion characteristics of a circular dielectric rod were investigated using Davidenko's method for several lower-order transverse magnetic(TM) modes. The normalized complex propagation constants were precisely determined and their tolerances below $10^{-10}$ compared with zero for both real and imaginary parts. It was also checked whether the normalized complex propagation constants obtained represented forward leaky waves. The leaky modes existing below the cutoff frequency of the guided mode were classified as a nonphysical mode, reactive mode, antenna mode, and spectral gap based on a precise determination of the complex propagation constants. Finally, the effects of the dielectric constant and radius of the dielectric rod on the leaky dispersion characteristics were also considered.

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.158-161
• /
• 1991

A new analytical expression for the temperature variation characteristics of hydrogenerated amorphous silicon (a-si:H) thin film transistors, between 223K and 433K, is presented and experimentally virified. The result show that the experimental transfer and output characteristics at several temperatures are easily modeled between $-50^{\circ}C\;and\;90^{\circ}C$. The model is based on three function obtained from the experimental data of $I_D$ versus $V_G$. Theoretical results comfirm the simple form of the model in terms of the device geometry. It was determined that as the temperature increaseed, the saturated drain current increased.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.1103-1109
• /
• 2010

In this paper in order to analyze the mechanical properties, the permeability and the freezing properties of SB-2 materials which are mainly used with the subbase materials on the rod. For this ends, a series of the physical test, the permeability test and the freezing test were carried out the samples mixed the small aggregate and the big aggregate from which was re-classified the SB-2. From the test results, it was analyzed the characteristics of permeability and the characteristics of freezing of the samples.

• Journal of Ocean Engineering and Technology
• /
• v.28 no.6
• /
• pp.493-499
• /
• 2014

The resistance performances were studied for two 50-ft-class power yachts made of carbon fiber reinforced plastic (CFRP) with different hull form characteristics using model tests. The tests were carried out at a high-speed circulating water channel (CWC) for the 16–38 knot range. The total resistance, trim, and sinkage were measured, and the results were compared with wave patterns. The results showed that a chine position at the draft line had a strong effect on the planning performance and resistance performance in a certain velocity range.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.10a
• /
• pp.231-238
• /
• 2005

Incompetent sediments and competent volcanics are consisted of the Cenozoic geology in Korea. Although the Cenozoic area is small, it is necessary to special interesting for ground of these geological material. The Cenozoic geology shows heterogeneous characteristics. We can look at the weak Cenozoic sedimentary rocks under the hard Cenozoic basalt in the area. Some Cenozoic un(or half)-consolidated soft sediments have large, heavy and hard boulders. Some volcanics and tuffaceous sediments have swelling clays. These characteristics give very difficult problems to engineering geologists and civil engineers.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.924-926
• /
• 2001

This paper presents the characteristics of current harmonics and torque ripple of Brushless DC motor, which is developed the fan blower of vehicles, according to permanent magnet shape input voltage wave form. To investigate the torque ripple and the phase current harmonics, these characteristics is analysed and compared the experimental results. In the process of analysis, FEM is introduced and computed a transient state torque of BLDC with a sinusoidal and a PWM wave voltage.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.849-851
• /
• 2001

This paper presents experimental method of parameter measurement and starting characteristics of 3 phase induction motor. Equivalent circuit parameters measured by DC test, the blocked rotor test, and no load test were used as the input data for computer simulation. Starting characteristics, such as starting current and torque were analyzed through computer simulation by Matlab, and the simulation results were compared with experiment using strain gauge attached on motor shaft. We conform that experimental results are very similar to that of simulation.

• Journal of information and communication convergence engineering
• /
• v.5 no.4
• /
• pp.320-323
• /
• 2007

This paper presents the resonance characteristics of the ZnO-based FBAR devices with multilayered Bragg reflectors with Cr adhesion layer inserted between $SiO_2$ and W layers. Due to the post- annealing, the return loss ($S_{11}$) and series/parallel quality factor are significantly improved when compared with the non-post annealing. This post-annealing method seems to be a very efficient way to improve the resonance characteristics of FBAR devices.