• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.04a
• /
• pp.117-120
• /
• 2007

This study investigated the spray modeling of the pressure-swirl atomizer installed in liquid rocket engine and the effect of drop distribution function especially. The $X^2$, originally implemented to KIVA, Rosin-Rammler and modified Rosin-Rammler distribution functions were investigated theoretically and compared to each other. Also, they were applied to pressure-swirl atomizer similar to the injector installed in liquid rocket engine to evaluate the feasibility for LRE injector. Among the distribution functions, original Rosin-Rammler distribution function was the most compatible with predicting the spray characteristics of pressure-swirl atomizer installed in liquid rocket engine.

• International Journal of Automotive Technology
• /
• v.6 no.6
• /
• pp.571-577
• /
• 2005

Combustion of turbulent sprays in a direct injection diesel engine is modeled by the conditional moment closure (CMC) model. The CMC routines are combined with the KIVA code to provide conditional flame structures to determine mean state variables, instead of mean reaction rates. An independent transport equation is solved for each flame group with equal mass of sequentially evaporating fuel vapor. CMC calculation begins as the fuel mass for each flame group begins to evaporate with corresponding initialization conditions. Comparison is made with measured pressure traces for four operating conditions at different rpm's and injection conditions. Results show that the CMC model with multiple flame histories can successfully be applied to ignition and mixing-controlled combustion phases of a diesel engine.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.1 no.1
• /
• pp.120-130
• /
• 1993

In the analysis of automobile exhaust system, the exciting forces from the engine determine the dynamic behavior of the system and the dynamic characteristics influence the riding quality. Therefore, the identification of the force in numeric value is quite important for the vibrational reduction. However, the value is difficult to obtain by experiments due to harsh conditions around the engine. In this research, an optimization technology is adopted to evaluate the exciting forces. An experimental method is conducted for the verification of the finite element modeling. Displacements on the end of the exhaust system are measured under the idling environment. cost function is set up to minimize the differences between the displacements of the numerical simulation and the experiment. Design variables are the components of the exciting forces. That is, optimization is utilized to estimate the forces with existing data. Excellent estimations have been calculated efficiently and the information is used again for the forced vibration of the exhaust system.

• International Journal of Automotive Technology
• /
• v.5 no.3
• /
• pp.165-172
• /
• 2004

Phenomenological models for direct injection diesel engine emissions including NO, soot, and HC were implemented into a full engine cycle simulation and validated with experimental data obtained from representative heavy-duty DI diesel engines. The cycle simulation developed earlier by Jung and Assanis (2001) features a quasi-dimensional, multi-zone, spray combustion model to account for transient spray evolution, fuel-air mixing, ignition and combustion. In this study, additional models for HC emissions were newly implemented and the models for NO, soot, and HC emissions were validated against experimental data. It is shown that the models can predict the emissions with reasonable accuracy. However, additional effort may be required to enhance the fidelity of models across a wide range of operating conditions and engine types.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.05a
• /
• pp.417-418
• /
• 2009

Aiming at time-dependent performance prediction of Liquid Rocket Engine(LRE) system, Program for Dynamic Characteristic Prediction of LRE is overviewed, and a modeling and dynamic analysis of rocket engine system with reference to developed transient simulator for LRE is outlined.

• Proceedings of the KIEE Conference
• /
• 1989.11a
• /
• pp.430-433
• /
• 1989

This paper describes dynamic engine model that is appricable to idle speed control system development. A basic linear engine model responds to throttle and load torque Inputs to provide manifold pressure and speed outputs. Transfer functions are then derived for the modified linear engine model and significant dynamic characteristics are discussed. Lastly, the strategy for controlling idle speed uses the linear optimal control theory. The linear optimal regulator was designed using a state variable and the performance Index was minimized.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2011.10a
• /
• pp.59-59
• /
• 2011

H-mode or X-mode predominates in marine engines according to the number of cylinder. Generally, H-mode noticeably happen in the engine below 7-cylinder and X-mode remarkably happen above 8-cylinder in the engine operating range. Until now, FEA (Finite Element Analysis) of 3D engine model has been mainly used to estimate the engine vibration but it is very time consuming for simulation and difficult to model simplification. Furthermore, the accuracy of simulation shows a marked difference according to modeling method. Therefore it is very difficult to have contentable result from FEA for beginners and laymen. In this paper, the estimation method based on a test has been suggested to solve the difficulty.

• International Commerce and Information Review
• /
• v.10 no.4
• /
• pp.81-96
• /
• 2008

uEFL is an open source solution to integrate general business/learning activities and processes. uEFL is originally developed to adopt LD (Learning Design) specification, which represents learning as various combination of learning activities with learning conditions and outcomes. Learning activities are described with participant's role, learning environment, and contextual sequence. This viewpoint resembles BPM (Business Process Modeling). uEFL can convert LD to BPM description. uEFL engine can run converted LD activity with other business activities. This paper presents 4 templates and 2 sample models for uEFL. The templates and models will show how learning activities can be integrated with business activities efficiently.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.3
• /
• pp.228-233
• /
• 2014

Reduction of the atmospheric pressure in high altitude affects brake booster system which was operated by the difference between the intake pressure and the atmospheric pressure. So, braking system can not stably perform due to decrease of brake boost pressure. In this study, effects of altitude change on engine intake pressure was analyzed by prediction model of engine intake pressure which was studied previously. And engine intake pressure was simulated by simulation model in various driving conditions and environmental conditions.

• Proceedings of the KSME Conference
• /
• 2000.04b
• /
• pp.213-219
• /
• 2000

In this work, it has been predicted the thermal performance of the engine cooling system in cases of stationary mode, constant speed mode, city-drive mode, and hill-climb mode by theoretical modeling of each component and numerical analysis. The modelling components are engine, radiator, heater, thermostat, water-pump, and cooling-fan. And also it has been developed the simulation program that can be used in case of design and system configuration changes. The comparison has not been made to verify the results of this work with experimental data, but the overall tendencies were agreed well with those of actual situation in four modes.