Browse > Article

CONDITIONAL MOMENT CLOSURE MODELING OF TURBULENT SPRAY COMBUSTION IN A DIRECT INJECTION DIESEL ENGINE  

HAN I. S. (Division of Mechanical Engineering, Pohang University of Science and Technology)
HUH K. Y. (Division of Mechanical Engineering, Pohang University of Science and Technology)
Publication Information
International Journal of Automotive Technology / v.6, no.6, 2005 , pp. 571-577 More about this Journal
Abstract
Combustion of turbulent sprays in a direct injection diesel engine is modeled by the conditional moment closure (CMC) model. The CMC routines are combined with the KIVA code to provide conditional flame structures to determine mean state variables, instead of mean reaction rates. An independent transport equation is solved for each flame group with equal mass of sequentially evaporating fuel vapor. CMC calculation begins as the fuel mass for each flame group begins to evaporate with corresponding initialization conditions. Comparison is made with measured pressure traces for four operating conditions at different rpm's and injection conditions. Results show that the CMC model with multiple flame histories can successfully be applied to ignition and mixing-controlled combustion phases of a diesel engine.
Keywords
Conditional moment closure; Turbulent spray combustion; Direct injection diesel engine; Multiple flame structures;
Citations & Related Records

Times Cited By Web Of Science : 2  (Related Records In Web of Science)
Times Cited By SCOPUS : 2
연도 인용수 순위
1 Hasse, C., Bikas, G. and Peters, N. (2000). Modeling DIdiesel combustion using the eulerian particle flamelet model (EPFM). SAE Paper No. 2000-01-2934
2 Kim, S. H., Huh, K. Y. and Fraser, R. A. (2000). Modeling autoignition of a turbulent methane jet by the conditional moment closure model. Proc. Combust. Inst., 28, 185-191   DOI   ScienceOn
3 Kim, S. H. and Huh, K. Y. (2004). Second-order conditional moment closure modeling of turbulent piloted Jet diffusion flames. Combust. Flame, 138, 336-352   DOI   ScienceOn
4 O'Brien, E. E. and Jiang, T. L. (1991). The conditional dissipation rate of an initial binary scalar in homogeneous turbulence. Phys. Fluids, A3, 3121-3123
5 Pitsch, H., Wan, Y. P. and Peters, N. (1995). Numerical ivestigation of soot formation and oxidation under diesel engine conditions. SAE Paper No. 952357
6 Kim, S. H. and Huh, K. Y. (2002). Use of the conditional moment closure model to predict NO formation in a turbulent $CH_4/H_2$ flame over a bluff body. Combust. Flame, 130, 94-111   DOI   ScienceOn
7 Smith, N. S. A., Bilger, R. W., Carter, R. D., Barlow, R. S. and Chen, J. Y. (1995). A comparison of CMC and PDF modelling predictions with experimental nitric oxide LIF/Raman measurements in a turbulent H2 jet flame. Combust. Sci. Tech., 105, 357-375   DOI   ScienceOn
8 Magnussen, B.F., Hjertager, B. H., Olsen, J. G. and Bhaduri, D. (1978). Effect of turbulent structure and local concentration on soot formation and combustion in $C_2H_2$diffusion flames. Proc. Combust. Inst., 17, 1383-1393
9 Kim, W. T. and Huh, K. Y. (2002). Numerical simulation of spray autoignition by the first-order conditional moment closure model. Proc. Combust. Inst., 29, 569-576   DOI   ScienceOn
10 Jones, W. P. and Whitelaw, J. H. (1982). Calculation methods for reacting turbulent flows. Combust. Flame, 48,1-26   DOI   ScienceOn
11 Barths, H., Antoni, and Peters, N. (1998). Threedimensional simulation of pollutant formation in a DIdiesel engine using multiple interactive flamelets. SAE Paper No. 982459
12 Klimenko, A. Y. and Bilger, R. W. (1999). Conditional moment closure for turbulent combustion. Prog. Energy Combust. Sci., 25, 595-687   DOI   ScienceOn
13 Halstead, M. P., Kirsch, L. J., Prothero, A. and Quinn, C. P. (1975). A mathematical model for hydrocarbon autoignition at high pressures. Proc. R. Soc. Lond., A. 346,515-538   DOI
14 Ko, K. N., Lee, C. S. and Huh, J. C. (2005). Atomization process of diesel fuel spray in the initial stage of injection. Int. J. Automotive Technology 6, 1, 9-14