• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.49-52
• /
• 2007

We investigated hydrogen storage and production properties using redox system of iron oxide($Fe_{3}O_{4}$ + $4H_{2}$ ${\leftrightarrows}$ 3Fe + $4H_{2}O$) modified with rhodium, ceria and zirconia under atmospheric pressure. Reduction of iron oxide with hydrogen(hydrogen storage) and re-oxidation of reduced iron oxide with steam(hydrogen evolution) was carried out using a temperature programmed reaction(TPR) technique. On the temperature programmed studies, the effects of amounts of cerium and zirconium on the re-oxidation rate of partial reduced iron oxides were increased with increasing metal additives amount, but the rhodium amount showed little effect on the re-oxidation rate. On the thermal studies, the re-oxidation rates were enhanced with increasing temperature(300 $^{\circ}C$ < 350 $^{\circ}C$).

• 터널과지하공간
• /
• 제26권4호
• /
• pp.293-303
• /
• 2016

이산화탄소 지중저장 기술은 이산화탄소 저감을 위한 가장 효과적인 방법 중 하나로 주목받고 있다. 본 연구에서는 이산화탄소 저장조건을 실험실에서 모사하였다. 사암과 셰일 시료를 1M NaCl 용액에 포화시킨 후 $45^{\circ}C$, 10기압의 조건에서 4주 동안 반응시키며 물리적 성질과 미세구조적 성질의 변화를 측정하였다. 부피, 밀도, 탄성파속도, 포아송비, 동탄성계수 등 모든 항목에서 사암 시료에 비해 셰일 시료의 물리적 성질 변화가 크게 나타났다. X선 단층촬영을 통한 미세구조 분석 결과 두 가지 시료 모두에서 공극의 총개수가 감소하였고, 각각의 공극들이 가지는 평균 부피, 평균 표면적, 평균 등가직경 등이 변화하였다. 이는 이산화탄소와 광물의 반응으로 인한 점토 광물의 팽창 및 유출이 원인인 것으로 판단된다. 본 연구결과는 이산화탄소 지중저장 시 발생되는 암반의 물리적, 미세구조적 변화를 예측하는 데 효과적으로 이용될 것으로 기대된다.

• 한국식품과학회지
• /
• 제32권2호
• /
• pp.396-401
• /
• 2000

장류를 이용한 대표적 조미식품인 쌈장에 감마선을 조사한 후 $25^{\circ}C$와 $37^{\circ}C$에 10주간 저장하면서 제품의 품질변화를 살펴보았다. 감마선조사에 의하여 효모는 2.5 kGy 조사구에서도 완전 사멸되었으며, 일반세균은 10 kGy 조사구에서 5 log cycle 정도의 감소율을 나타내었고 보존 기간 중에도 미생물의 생장이 억제되었다. 감마선조사는 제품의 외관평가 요소인 gas 발생에 의한 제품의 swelling과 갈색화를 유의적으로 억제하였으며, 장류제품의 숙성정도 및 보존기간 중의 품질 평가 지표가 되는 아미노태질소와 pH의 변화, 그리고 효소활성평가의 지표가 되는 단백질분해효소의 활성변화에서도 안정적인 품질유지 효과를 보여주었다. 또한, 관능평가에 있어서도 감마선조사구가 대조구에 비하여 유의적으로 높은 선호도를 나타내어 감마선 조사 기술이 쌈장의 관능적, 생화학적 품질을 유지시키는 효과적인 방법인 것으로 평가되었다.

• Structural Engineering and Mechanics
• /
• 제65권5호
• /
• pp.557-572
• /
• 2018

The academic research works about liquid storage tanks are reviewed for the purpose of providing valuable reference to the engineering practice on their aseismic design. A summary of the performance of tanks during past earthquakes is described in this paper. Next, the seismic response of tanks under unidirectional earthquake is reported, supplemented with the dynamic response under multidirectional motions. Then, researches on the influence of soil-structure interaction are brought out to help modify the seismic design approach of tanks in different areas with variable properties of soils. Afterwards, base isolation systems are reported to demonstrate their effectiveness for the earthquake-resistant design of liquid storage tanks. Further, researches about the liquid-structure interaction are reviewed with description of simplified models and numerical analytical methods, some of which consider the elastic effect of tank walls. Moreover, the liquid sloshing phenomenon on the hydrodynamic behaviors of tanks is presented by various algorithms including grid-based and meshfree method. And then the impact of baffles in changing the dynamic characteristics of the liquid-structure system is raised, which shows the energy dissipation by the vortex motion of liquid. In addition, uplifting effect is given to enhance the understanding on the capacity of unanchored tanks and some assessment of their development. At last, the concluding remarks and the aspects of extended research in the field of liquid storage tanks under seismic loads are provided, emphasizing the thermal stress analysis, the replaceable system for base isolation, the liquid-solid interaction and dynamic responses with stochastic excitations.

• 대한가정학회지
• /
• 제42권2호
• /
• pp.213-227
• /
• 2004

This study was attempted to investigate the sensory and textural characteristics of mungbean starch gels with soy bean oil and sucrose fatty acid ester(SE) addition during room temperature storage. Freshly prepared mungbean starch gels, with and without soy bean oil and SE, were stored at 25$^{\circ}C$ for 24, 48 and 72 hours. The color value, syneresis, texture and sensory properties of the gels were measured. The lightness(L) of the gels with soy bean oil and without additives was similar whereas that with SE was lower than that without additives. Syneresis of the gels with soy bean oil and SE was lower than that without additives. Rupture stress, rupture strain and rupture energy of the freshly prepared gel with 2∼4% soy bean oil were increased, but there were no differences in rupture properties between the gel with soy bean oil and that without additives. Rupture stress, rupture stain and rupture energy of all the gels with SE were decreased. Addition of soy bean oil to the gel did not change the texture profile of the gel, whereas hardness, springiness and chewiness of the gel with SE were decreased. In sensory evaluation, the acceptability of freshly prepared gel with soy bean oil was similar to that without additives, whereas that of the gel with 2% soy bean oil stored for 24 hours was higher than that without additives. The acceptability of the gel with SE was decreased significantly.

• 접착 및 계면
• /
• 제3권4호
• /
• pp.1-9
• /
• 2002

본 연구의 목적은 목분과 폴리프로필렌으로 제조한 목질-고분자 복합재료의 점탄성적 성질에 미치는 결합제, 기핵제의 영향에 대해 고찰하는데 있으며, 목분과 결합제간의 esterification 반응이 목질-고분자 복합재의 기계적 성질에 미치는 영향 또는 고찰하고자 한다. 복합재는 목분 60%와 폴리프로필렌 40%를 혼합하여 제조하였으며, DMTA (Dynamic mechanical thermal analysis)를 사용하여 damping peaks (than ${\delta}$), storage modulus (E'), loss modulus (E")를 측정하였다. 또한 XPS (X-ray Photolectron Spectroscopy)를 사용하여 목분에 MAPP를 처리하기 전과 후의 상태를 고찰하였다. DMA 시험은 온도범위 $-20{\sim}100^{\circ}C$에서 여러가지 주파수 (1, 5, 10, 25 HZ) 조건과, 승온속도 $5^{\circ}C/min$으로 실시하였다. 이 시험결과를 토대로 복합재의 활성화에너지를 구하여 결합제와 기핵제가 목분과 고분자물질간 계면의 성질에 미치는 영향을 고찰하였다.

• 한국수소및신에너지학회논문집
• /
• 제19권6호
• /
• pp.482-489
• /
• 2008

Ti-Cr alloys consist of BCC solid solution, C36, C14 and C15 Laves phase at high temperature. Among others, the BCC solid solution phase was reported to have a high hydrogen storage capacity. However, activation, wide range of hysteresis at hydrogenation/dehydrogenation, and degradation of hydrogen capacity due to hydriding/dehydriding cycles must be improved for its application. In this study, to improve such problems, we added a Nb. For attaining target materials, Ti-10Cr-xNb(x=1, 3, 5wt.%) specimens were prepared by arc melting. The arc melting process was carried out under argon atmosphere. As-received specimens were characterized using XRD(X-ray diffraction), SEM(Scanning Electron Microscopy) with EDX(Energy Dispersive X-ray) and TG/DSC(Thermo Gravimetric Analysis/Differential Scanning Calorimetry). In order to examine hydrogenation behavior, the PCI(pressure-Composition-Isotherm) was performed at 293, 323, 373 and 423K.

• 전기화학회지
• /
• 제10권4호
• /
• pp.257-261
• /
• 2007

The electronic properties of quantum dots can be tuned by changing the size of particles without any change in their chemical composition. CdSe quantum dots, the sizes of which were controlled by changing the concentrations of Cd and Se precursors, were adsorbed on $TiO_2$ photoelectrodes and used as sensitizers for photovoltaic cells. For applications of CdSe quantum dot as sensitizers, $CdSe/TiO_2$ films on conducting glass were employed in a sandwich-type cell that incorporated a platinum-coated conductive glass and an electrolyte consisting of an $I^-/I_3^-$ redox. The fill factor (FF) and efficiency for energy conversion ($\c{c}$) of the photovoltaic cell was 62 % and 0.32 %, respectively.

• Journal of Electrochemical Science and Technology
• /
• 제10권2호
• /
• pp.159-169
• /
• 2019

The activated carbon materials were prepared from waste biomass by ultrasonic assisted chemical activation method (UCA), ultrasonic assisted physical activation method (UPA) and Manganese nitrogen doped carbon (Mn/N-C). The XRD result shows the turbostatic (fully disordered) structure. The cyclic voltammetry test was done at 50 mV/s using 1M sodium sulfate and the values of specific capacitance were found to be 93, 100 and 115 F/g for UCA, UPA and Mn/N-C respectively. The power density values for the samples UCA, UPA and Mn/N-C were found to be 46.04, 87.97 and 131.42 W/kg respectively. The electrochemical impedance spectroscopy was done at low frequency between 1 to 10 kHz. The Nyquist plot gives the resistant characteristics of the materials due to diffusional resistance at the electrode-electrolyte interface. The Energy Dispersive X-Ray Spectroscopyanalysis (EDAX) analysis showed that the percentage doping of nitrogen and manganese were 3.53 wt% and 9.44 wt% respectively. It is observed from the experiment Mn/N-C doped carbon show good physical and electrochemical properties.

• Corrosion Science and Technology
• /
• 제20권4호
• /
• pp.183-188
• /
• 2021

The increasing demand for energy storage in mobile electronic devices and electric vehicles has emphasized the importance of electrochemical energy storage devices such as Li-ion batteries (LIBs) and supercapacitors. For reversible Li storage, alternative anode materials are actively being developed. In this study, we designed and fabricated an Nb₂O₅-Li₃VO₄ composite for use as an anode material in LIBs and hybrid supercapacitors. Nb₂O₅ powders were dissolved into a solution and the precursors were precipitated onto Li₃VO₄ through a simple, low-temperature hydrothermal reaction. The annealing process yielded an Nb₂O₅-Li₃VO₄ composite that was characterized by X-ray diffraction, electron microscopy, and X-ray photoelectron spectroscopy. Electrochemical tests revealed that the Nb₂O₅-Li₃VO₄ composite electrode demonstrated increased capacities of approximately 350 and 140 mAh g^-1 at 0.1 and 5 C, respectively, were maintained up to 1000 cycles. The reversible capacity and rate capability of the composite electrode were enhanced compared to those of pure Nb₂O₅-based electrodes. These results can be attributed to the microstructure design of the synthesized composite material.