• 한국재료학회지
• /
• 제29권4호
• /
• pp.221-227
• /
• 2019

This study examines the role of the nano- and micro-particle ratio in dispersion stability and mechanical properties of composite resins for SLA(stereolithography) 3D printing technology. VTES(vinyltriethoxysilane)-coated $ZrO_2$ ceramic particles with different nano- and micro-particle ratios are prepared by a hydrolysis and condensation reaction and then dispersed in commercial photopolymer (High-temp) based on interpenetrating networks(IPNs). The coating characteristics of VTES-coated $ZrO_2$ particles are observed by FE-TEM and FT-IR. The rheological properties of VTES-coated $ZrO_2/High-temp$ composite solution with different particle ratios are investigated by rheometer, and the dispersion properties of the composite solution are confirmed by relaxation NMR and Turbiscan. The mechanical properties of 3D-printed objects are measured by a tensile test and nanoindenter. To investigate the aggregation and dispersion properties of VTES-coated $ZrO_2$ ceramic particles with different particle ratios, we observe the cross-sectional images of 3D printed objects using FE-SEM. The 3D printed objects of the composite solution with nano-particles of 80 % demonstrate improved mechanical characteristics.

• 한국수소및신에너지학회논문집
• /
• 제16권3호
• /
• pp.238-243
• /
• 2005

Mg and Mg-based alloys are most important hydrogen storage materials. It is a lightweight and low-cost materials with high hydrogen storage capacity. However, the formation of hydride at high temperature, the deterioration effect, the hydriding and dehydriding kinetics are bad factor for application. In this study, Mg and Ni have been produced by hydrogen induced mechanical alloying(HIMA) process. The raw materials, Mg(purity 99.9%) chip and Ni(purity 99.95%) chip was prepared by using a planetary ball mill apparatus(FRITSCH pulverisette 5). The balls to chips mass ratio(BCR) are 30:1. The hydrogen pressure induced 2.0MPa and milling times were 12, 24, 48, 72, 96 hours with a rotating speed of 200rpm. X-ray diffraction(XRD) analysis was made to characterize the crystallite size and misfit strain. The crystallite size measured by laser particle size analysis(PSA). Microstructure changes were investigated by scanning electron microscopy(SEM) and the transmission electron microscopy(TEM). The hydrogen storage properties were evaluated by using an Sivert's type automatic pressure-composition-therm(PCT) apparatus.

• 폴리머
• /
• 제29권1호
• /
• pp.8-13
• /
• 2005

상변환 물질(PCM)을 함유하는 폴리스티렌(PS) 입자는 미니에멀션 중합을 이용하여 제조하였고, 여러 제조 조건에 따라 제조된 고분자 라텍스는 평균 입자크기, 입자 분포 그리고 잠열 저장특성에 관하여 조사하였다. 제조된 PS 입자의 형태와 입자 특성은 각각 SEM과 입도 분석기에 의하여 측정하였다. 분석 결과, 생성된 라텍스 입자의 특성은 각 변수에 의하여 조절할 수 있었으며, 제조된 PS 입자는 나노크기의 안정한 구형의 입자가 생성되는 것을 관찰할 수 있었다. 이는 중합시 첨가된 공유화제는 단량체 입자간의 Oswald ripening과 유착을 억제시키기 때문인 것으로 판단된다. 또한 PCM을 함유하는 PS 입자의 열적 특성은 시차주사열량계(DSC)를 이용하였고, PS 입자의 용융-동결 싸이클에 의하여 열에너지 저장 및 방출 특성을 조사하였다. DSC 결과로부터, PCM을 함유하는 PS 입자의 최대 잠열량은 약 145 J/g으로 나타나는 것을 확인할 수 있었고, 이로부터 PCM을 함유하는 PS 입자는 열에너지 저장매체로서 우수한 잠재성을 갖는 것으로 판단된다.

• Journal of Electrochemical Science and Technology
• /
• 제8권4호
• /
• pp.338-343
• /
• 2017

Activated carbon has lower electrical conductivity and reliability than other carbonaceous materials because of the oxygen functional groups that form during the activation process. This problem can be overcome by doping the material with heteroatoms to reduce the number of oxygen functional groups. In the present study, N, F co-doped activated carbon (AC-NF) was successfully prepared by a microwave-assisted hydrothermal method, utilizing commercial activated carbon (AC-R) as the precursor and ammonium tetrafluoroborate as the single source for the co-doping of N and F. AC-NF showed improved electrical conductivity ($3.8\;S\;cm^{-1}$) with N and F contents of 0.6 and 0.1 at%, respectively. The introduction of N and F improved the performance of the pertinent supercapacitor: AC-NF exhibited an improved rate capability at current densities of $0.5-50mA\;cm^{-2}$. The rate capability was higher compared to that of raw activated carbon because N and F codoping increased the electrical conductivity of AC-NF. The developed method for the co-doping of N and F using a single source is cost-effective and yields AC-NF with excellent electrochemical properties; thus, it has promising applications in the commercialization of energy storage devices.

• Journal of Communications and Networks
• /
• 제18권6호
• /
• pp.902-912
• /
• 2016

Recent advances in energy harvesting (EH) technology have motivated the adoption of rechargeable mobile devices for communications. In this paper, we consider a point-to-point (P2P) wireless communication system in which an EH transmitter with a non-ideal rechargeable battery is required to send a given fixed number of bits to the receiver before they expire according to a preset delay constraint. Due to the possible energy loss in the storage process, the harvest-use-and-store (HUS) architecture is adopted. We characterize the properties of the optimal solutions, for additive white Gaussian channels (AWGNs) and then block-fading channels, that maximize the energy efficiency (i.e., battery residual) subject to a given rate requirement. Interestingly, it is shown that the optimal solution has a water-filling interpretation with double thresholds and that both thresholds are monotonic. Based on this, we investigate the optimal double-threshold based allocation policy and devise an algorithm to achieve the solution. Numerical results are provided to validate the theoretical analysis and to compare the optimal solutions with existing schemes.

• 한국수소및신에너지학회논문집
• /
• 제13권2호
• /
• pp.151-158
• /
• 2002

The hydorgen storage alloys were produced by melting in arc melting furnace and then solution heat treated at $1,100^{\circ}C$ followed by pulverization. The chemical analysis on the samples showed that the major elements of misch metal(Mm) were La, Ce, Pr and Nd with impurity less than 1wt.%. X-ray diffraction indicated that the structure for these samples were a single phase of hexagonal with $CaCu_5$ type. Compared to the initial particle size $100{\sim}110{\mu}m$, the many fine cracks were found and particle size decreased to $14{\mu}m$ for $MmNi_{4.5}Mn_{0.5}$ after hydriding/dehydring test run. To activate the sample the vessel filled with hydrogen storage alloys was first evacuated for for at $70^{\circ}C$ and then treated for 10.5hr under hydrogen pressure of 20atm for $MmNi_{4.5}Mn_{0.5}$ alloy. The experimental data showed that the hydrogen storage alloy of $MmNi_{4.5}Mn_{0.5}$ had superior adsorption and description properties within a temperature rang of $40^{\circ}C{\sim}80^{\circ}C$ and also they had a good P-C-T curve.

• 한국식품과학회지
• /
• 제16권2호
• /
• pp.139-142
• /
• 1984

혼합(混合) 조미료(調味料)의 부원료(副原料)로 사용되고 있는 마늘분말(粉末)의 효과적(效果的)인 살균법(殺菌法) 개발(開發)을 목표((目標)로 $\gamma$-선(線) 조사후(照射後) $30{\pm}1^{\circ}C$에서 3개월간(個月間) 저장(貯藏)하면서 미생물(微生物)의 생육상태(生育狀態)와 몇가지 이화학적(理化學的) 대성(待性)에 대한 실험(實驗)을 수행(遂行)하였다. 마늘 분말(粉末)의 일반세균(一般細菌)과 대장균군(大腸菌群)은 g당(當) $4.7{\times}10^{4}$과 $5.0{\times}10^{3}$으로 각각 나타났으며, 대장균군(大腸菌群)은 5kGy, 일반세균(一般細菌)은 7kGy조사(照射)로서 완전(完全) 사멸(死滅)되어 저장(貯藏) 3개월후(個月候)에도 미생물(微生物)은 전혀 생육(生育)되지 않았으며, 세균(細菌)의 $D_{10}$값은 3.34로 나타났다. 살균선량(殺舊線量)에서 시료(試料)의 수분(水分), 당(糖), pH 및 색도(色度)는 거의 변화(變化)되지 않았고. pyruvic acid는 조사(照射)에 의해 거의 영향을 받지 않았으나 저장기간(貯藏期間)의 경과로 모든구(區)에서 점차 감소(減少)되었다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제21권1호
• /
• pp.40-44
• /
• 2019

This study investigates mixtures of water and cryoprotectant agents (CPAs) to store high-grade cold energy. Although water is an ideal material for a cold thermal storage (CTS) due to its high specific heat, undesirable volume expansion may cause structural stresses during freezing. The volume expansion can be alleviated by adding the CPAs to water. However, the CPA aqueous solutions not only have different thermal properties but also transit to amorphous state different from pure water. Therefore, these characteristics should be considered when using them as material of the CTS. In experiments, glycerol and dimethyl sulfoxide (DMSO) are selected as the candidate CPA. The volume expansion of the solution is measured by an in-situ strain gauge in low temperature region. The specific heat capacity of the solution is also measured by differential scanning calorimetry (DSC). Both the amount of volume expansion and the specific heat capacity of the CPA aqueous solution decrease in the case of higher concentration of CPA. These characteristics should be contemplated to select optimal aqueous solution for CTS for liquid air energy storage system (LAES). The CPA solutions have advantages of having wide temperature range to utilize the latent heat of water and higher sensible heat of the CPA. The CPA solutions which can satisfy the allowable stress of the structure are determined. Consequently, among the CPA solutions investigated, DMSO 20% w/w solution is the most suitable for the CTS.

• 정보학연구
• /
• 제10권2호
• /
• pp.37-45
• /
• 2007

The multiple-ability which the structure and the physical properties which the carbon or scull tube are unique show the applicability is superior in the plane indication element which is an indispensability of information communications apparatus, the stubbornness memory element, 2nd change of air and the rough copy dosage [khay] plaque seater, the hydrogen store material and the chemical sensor back and it has the possibility which will pass over the limit which the element of existing has. from the present paper it compared in the steel and only 10 the boat it did and it analyzed against an energy storage space voluntary application and developmental apply the carbon or scull tube trend in order about under researching the effective energy storage element it could be appeared, the technique of the strong carbon nano tube. 1. The hazard which embodies the energy storage element which uses the carbon or scull tube it follows in the function which stands and CNT of the structure which is various is necessary. 2. CNT fabrications of each one must precede possible not only must be each Cabinet conference circumstances quality gain and loss. 3. The structural control of syntheses, length controls, diameter controls and the metal - CNT junction control backs of quality CNT must precede. Applies the hereafter carbon or the scull tube in the various element with the primary preceding base technique for the structural plan technique of the carbon or scull tube to be certainly established, it does, secondarily the various element functional control technique which uses the carbon or scull tube is researched and will do.

• 전기화학회지
• /
• 제10권2호
• /
• pp.126-131
• /
• 2007

[ $Li_+$ ]를 기반으로 하는 비수용액 전해질에서 Prussian blue가 degradation이 없이 구동할 수 있도록 소재를 design하고 제조하여 전기화학적 변색특성을 연구하였다. Prussian blue는 ITO가 코팅되어 있는 유리판위에 일정전류-전착법으로 코팅을 했고, 이 때 사용된 코팅 용액은 $FeCl_3,\;K_3Fe(CN)_6$을 deionized water에 녹이고, HCl, KCl, LiCl을 각각 넣었다. 전기화학적 변색특성을 비교하기 위해 continuous와 pulse potential cycle 하는 동안 transmittance 변화를 in-situ He-Ne laser를 이용하여 측정하였고, electroactive layer thickness를 통해 degradation된 정도를 실험하였다.