• Environmental and Resource Economics Review
• /
• v.9 no.5
• /
• pp.925-945
• /
• 2000

This paper analyses the impact of energy-saving investment on Greenhouse gas emissions using a model of energy demand in Korea. SUR method was employed to estimate the demand equation. The econometric estimates provide information about the energy price divisia index, sector income, and energy saving-investment elasticities of energy demand. Except for energy price divisia, the elasticities of each variable are statistically significant. Also, the price and substitution elasticities of each energy price are similar to the results reported by the previous studies. The energy-saving investment is statistically significant and elasticities of each sector is inelastic. Using the coefficient of energy-saving investment and carbon transmission coefficient, the amount of reduction of energy demand and the reduction of carbon emissions can be estimated. The simulation is performed with the scenario that the energy-saving investment increase by 10~50%, keeping up with Equipment Investment Plan of 30% increase in energy-saving investment by 2000. The results show that the reduction of energy demand measured as 11.2% based upon 1995's level of the energy demand, in industrial sector. Accordingly, the carbon emissions will be reduced by 11.3% based upon 1995's level of the carbon emissions in industrial sector.

• Environmental and Resource Economics Review
• /
• v.16 no.3
• /
• pp.485-510
• /
• 2007

The purpose of this paper is to empirically analyze the economic effect of energy saving investment on the improvement of energy intensity. The data used in this paper are panel data, both time-series and cross-section data. In addition, eight manufacturing sectors has been divided into two groups: massive energy consuming (four industries) and non-massive energy consuming (four industries) ones and the time period of analysis is from 1982 to 2004. According to the empirical results, firstly, energy saving investment has a negative relationship with energy intensity, however, its effect is not high in terms of absolute volume of energy consuming. Secondly, in improving energy intensity of energy saving investment, its elasticity IS higher in non-massive energy consuming sector compared it with massive energy consuming sector. Thirdly, automation investment is also playing an important role in energy conservation. The elasticities of automation investment to energy intensity are larger than those of energy saving investment. In terms of the reduction of greenhouse gas per investment unit cost, however, energy saving investment has larger effect than automation investment.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.30 no.1
• /
• pp.10-16
• /
• 2018

The climate of summer in Korea is quite hot and humid. Many studies have been carried out to reduce the energy required for operating a dehumidifier. The dehumidifier is mainly connected to the cooling system since it operates in the summer. Conventional dehumidification methods often require additional cooling and energy for dehumidification. In this study, a system for increasing the efficiency by applying a membrane was analyzed. Its energy saving effect was analyzed when it was applied to residential buildings. Economic efficiency was also evaluated. As a result of this study, 9.0% energy savings were achieved for residential buildings. The investment recovery period was 28.9 years. Such long investment recovery period was because the initial investment cost was excessive and annual energy saving only appeared in the summer.

• KIEAE Journal
• /
• v.13 no.2
• /
• pp.53-60
• /
• 2013

This study examined the building envelope structure used in small housings near urban area which have not good energy source in relation to the application of passive design for energy saving of small-sized architectural design firms in local cities and aimed to provide the basic materials of future design direction of designers and housing owners by analyzing economy of a project in order to know the amount of energy saving and additional expenses depending on the building envelope pattern. As a result of comparing and examining the energy saving cost from the period of use compared to investment by the thickness of insulating materials based on building envelope pattern for energy saving, it was found that the thicker the insulating materials are, the more energy saving amount is. While the current bead-type insulating materials have short payback period due to low initial investment, extruded insulating materials show the difference of five years compared to bead-type insulation because of its high initial investment.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.13 no.2
• /
• pp.16-21
• /
• 2017

In this study, the flow effect of warming and cooling in the air supply of a pit for air conditioning were evaluated in BS art museum. We simulated the flow temperature for a pit winter and summer seasons using computational fluid dynamics. Consequential, energy saving, energy saving costs and initial payback periods were calculated and the following conclusions were drawn. The warming effect of the winter increased by $18.1^{\circ}C$ and $0.2^{\circ}C/m$ and the cooling effect of the summer decreased by $6.1^{\circ}C$ and dropped to $0.07^{\circ}C/m$. Energy saving appeared to be 19.1 kW in the summer and 54.3 kW in winter. Energy saving costs ranged from 2,567,119 won/year to 5,134,238 won/year and at minimum, initial payback period for initial investment was 3.9 years. As a result, the air supply system using an existing pit without any burden on initial investment costs is believed to contribute to energy saving through warming and cooling of unutilized energy effects.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.23 no.10
• /
• pp.656-661
• /
• 2011

The amount of water resources that can be used tend to be decreased gradually. In contrast, the rapidly increasing water consumption is a problem that need to be addressed. Renovation and equipment replacement to improve energy efficiency and to reduce expenditure for building usage is required. But the excessive initial investment cost and the prolonged of pay back period may be uneconomical choice. Water usage for cleaning the toilet bowl accounts for 27%of the total water usage. Water-saving valve that can select the amount of water for cleaning toilet bowl can be reduced expenditure. After installing water-saving valve, analysed the economic effects. Water-saving valves compared with flush valves, and researched the amount of water usage. Then analyzed for the economic effects. Water-saving valve was used 5.6 ${\ell}$/time for cleaning toilet bowl. In contrast, flush valve was consumed 8.4 ${\ell}$/time. Water-saving valve's water-saving rate was 33.3%. The initial payback period for Water-saving valve was 459.5 days. By a small investment in water saving valve, the economic benefits can be obtained.

• Environmental and Resource Economics Review
• /
• v.20 no.1
• /
• pp.99-118
• /
• 2011

'Low Carbon, Green Growth' may be the achievable target in industry section, depending on whether less reliance on fossil-fuels use can bring higher productivity growth in the long run. This paper tests for the short-run and long-run effects of investment on energy-saving equipments on productivity growth in the Korean manufacturing industries. The investment in energy efficiency causes an increase in costs (measurement effect) in the short-run, but in the long-run likely improve energy intensity and reduce costs (positive real effect) despite the delay in new other investment for technical innovation (negative real effect). A 2SLS regression was attempted to deal with endogeneity of energy-saving investment. The productivity effects were tested for five manufacturing sub-industries showing relatively high energy intensity with annual time series data from 1982 through 2006. No productivity effects were accepted for all five sub-industries except Chemical products. Positive real effect was considered to be exceeded by negative real effect, resulting in decreased productivity growth for Chemical products.

• 한국태양에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.338-341
• /
• 2011

Water usage for cleaning the toilet bowl accounts for 27% of the total water usage. Water-saving valve that can select the amount of water for cleaning toilet bowl can be reduced expenditure. After installing water-saving valve, analysed the economic effects. Water-saving valves compared with flush valves, and researched the amount of water usage. Then analyzed fort he economic effects. Water-saving valve was used 5.6 ${\ell}/time$ for cleaning toilet bowl. In contrast, flush valve was consumed 8.4 ${\ell}/time$. Water-saving valve's water-saving rate was 33.3%. The initial payback period for Water-saving valve was 459.5 days. By a small investment in water saving valve, the economic benefits can be obtained.

• Journal of the military operations research society of Korea
• /
• v.35 no.2
• /
• pp.99-117
• /
• 2009

Energy is essential factor of production for a firm to produce goods and services. If so, what is the condition of maintaining profit of a firm when energy price is going up? In conclusion, the condition is that the rate of productivity improvement should be greater than the rate of energy price increase. To put this concretely, when the elasticity of energy price as to the productivity improvement is greater than the weight of the energy cost on to the total revenue of the firm, the firm can escape the negative effect of energy price increase. This is that, saying that once more, the firm have to reduce the energy cost or promote energy efficiency to maintain appropriate or sufficient profit when energy price is going up fast. Therefore, in this study we will analyze the effect of the oil price increase on the energy saving investment and that of energy saving investment on the energy efficiency in the field of Korean manufacturing industry. In doing so, this study could show that the effect of energy price increase on the energy efficiency of the firm and the factor of that mechanism.

• The Journal of Sustainable Design and Educational Environment Research
• /
• v.6 no.2
• /
• pp.25-52
• /
• 2007

This paper is focused on the economical efficiency of the geothermal heat pump system in school. As the importance of problems of environment and energy becomes larger, the development and distribution of energy-saving technology in the whole nation has become influential. This paper is intended, targeting on school buildings scattered all over the country, to evaluate the introduction and possibility of a terrestrial heat system which is in the first stage of introduction in the country, through energy consumption and efficiency in case where a terrestrial heat system is introduced. To do that, the author performed a qualitative analysis of the heat pump system using various terrestrial heat energy and the system introduced to existing school buildings and, through the analysis, made tentative evaluation on the most environment-friendly and energy saving type system. Also, the author performed simulation analysis using a currently typical school building standard and, on the basis of this result, conducted efficiency analysis of various heat pump systems. The conclusion according to synthetical analysis & evaluation can be summarized as follows. In case a heat pump system is introduced to a school building, it was deemed the investment in the early stage would increase, but the investment could be collected within 5~6 years through reduction of large operation expenses. Also, it was analyzed in case of terrestrial heat contracted heat mode using midnight electric power among heat pump systems, not only early investment but also operation expenses could be reduced to a great extent. Accordingly in case the system using terrestrial heat energy is applied to the school buildings that are to be newly built or repaired in the future, it will provide an object-lesson to students as well as contributing to energy saving.