• 제목/요약/키워드: energy intensity

검색결과 2,026건 처리시간 0.029초

환경산업연관표 2000을 이용한 산업부문의 이산화탄소(CO2) 발생 분석 (CO2 Emission Structure Analysis with Environmental Input-Output Table 2000)

  • 김윤경
    • 자원ㆍ환경경제연구
    • /
    • 제15권3호
    • /
    • pp.425-450
    • /
    • 2006
  • 산업부문은 생산 활동을 담당하는 특성 때문에 많은 에너지를 소비하고 많은 $CO_2$를 배출한다. 산업부문 중에서 에너지다소비산업이라고 일컬어지는 산업들은 다른 산업에 비해서 에너지소비가 많고 $CO_2$ 배출을 많이 하므로 관련정책의 목표대상으로서 우선적으로 거론된다. 그러나 해당 산업의 생산액과 $CO_2$ 배출량을 사용하는 환경원단위는 해당 산업만의 환경오염물질 배출의 정도를 측정하기에는 적합하지만, 산업들이 유기적으로 연결되어 서로 생산품을 수요하고 공급하고 있는 점을 고려한다면 환경원단위를 확대시킨, 그리고 산업 전체를 고려하는 지표로 해당 산업의 환경물질의 배출 정도를 평가해야 한다. 이에 본 논문에서는 우리나라의 환경산업연관표 2000을 작성하고, 에너지다소비산업 외에 전 산업을 대상으로 하여 산출액기준 및 열량기준의 환경원단위와, 이를 보다 확대하고 산업의 유기적 관계까지를 모두 고려하는 유발 $CO_2$ 발생량을 추정하여 우리나라의 경제주체간 및 산업간의 상품생산과 흐름에 수반되는 에너지소비와 환경오염물질의 흐름을 분석하였다. 분석결과에 따르면 산출액기준 및 열량기준의 환경원단위가 상대적으로 높은 산업들의 유발 $CO_2$ 발생량은 크다. 이 산업들은 직접적으로 발생시키는 $CO_2$가 많은 산업들이며, 환경부하가 큰 재화나 서비스를 생산한다. 그러므로 이 산업들을 대상으로 환경원단위 저감을 유도한다면 $CO_2$ 발생량을 감소시킬 수 있다. 그러나 환경원단위가 낮은 산업의 생산 시에 환경원단위가 높은 산업들의 생산품이 투입재로 사용된다면 그 산업의 유발 $CO_2$ 발생량은 커지고 경제 전체의 환경부하를 크게 만든다. 따라서 산출액기준의 환경원단위가 높은 산업들만을 중심으로 하여 환경원단위를 저하시키는 것 외에, 낮은 환경원단위를 갖는 산업들의 환경원단위도 지속적으로 감소시켜 다른 산업에 대한 연관을 통한 유발 $CO_2$ 발생량을 감소시켜야 한다. 이는 모든 산업에 대한 지속적인 환경원단위 저감이 경제 전체를 기준으로 더 큰 $CO_2$ 발생량 저감을 유도하는 것을 의미한다.

  • PDF

관통보와 평판의 연결 구조물에 대한 진동인텐시티 해석 (Vibration Intensity Analysis of Penetration Beam-plate Coupled Structures)

  • 홍석윤;강연식
    • 한국음향학회지
    • /
    • 제21권1호
    • /
    • pp.73-81
    • /
    • 2002
  • 본 논문에서는 중고주파영역에서의 진동해석기법인 파워흐름해석 법을 보와 평판이 연성된 구조물에 적용하기 위하여 무한보가 무한평판을 수직으로 투과하는 구조물에서의 파워투과반사계수를 파동전달법을 이용하여 구하였다. 이러한 파워투과반사계수를 실제 구조물에 적용하기 위해서는 파워흐름유한요소법으로의 활용이 필요하다. 이를 위해 본 논문에서는 파워투과반사계수를 이용하여 보 평판구조물을 위한 연결요소행렬식을 정립하였으며, 또한 보와 평판요소를 각각 해석할 수 있는 파워흐름유한요소해석 프로그램을 구성하고, 여기에 정립된 보와 평판간의 연결요소 행렬식을 대입하여 보와 평판이 연성된 구조물까지 해석이 가능한 프로그램으로 개발하였다. 이 프로그램을 이용하여 이상화한 선박의 선미부 구조물을 해석한 결과, 선박구조물에서 진동에너지분포를 구할 수 있었고, 진동 인텐시티를 통하여 구조물에서의 파워전달경로를 예측할 수 있었다.

지상기반 라이다의 측정 오차에 영향을 미치는 요인 분석 (Analysis of Factors Influencing the Measurement Error of Ground-based LiDAR)

  • 강동범;허종철;고경남
    • 한국태양에너지학회 논문집
    • /
    • 제37권6호
    • /
    • pp.25-37
    • /
    • 2017
  • A study on factors influencing measurement error of Ground-based LiDAR(Light Detection And Ranging) system was conducted in Kimnyeong wind turbine test site on Jeju Island. Three properties of wind including inclined angle, turbulence intensity and power law exponent were taken into account as factors influencing the measurement error of Ground-based LiDAR. In order to calculate LiDAR measurements error, 2.5-month wind speed data collected from LiDAR (WindCube v2) were compared with concurrent data from the anemometer on a nearby 120m-high meteorological mast. In addition, data filtering was performed and its filtering criteria was based on the findings at previous researches. As a result, at 100m above ground level, absolute LiDAR error rate with absolute inclined angle showed 4.58~13.40% and 0.77 of the coefficients of determination, $R^2$. That with turbulence intensity showed 3.58~23.94% and 0.93 of $R^2$ while that with power law exponent showed 4.71~9.53% and 0.41 of $R^2$. Therefore, it was confirmed that the LiDAR measurement error was highly affected by inclined angle and turbulence intensity, while that did not much depend on power law exponent.

Effects of Uphill Exercise on Digestible Energy Intake and Energy Expenditure during Exercise in Yearling Horses

  • Matsui, A.;Katsuki, R.;Fujikawa, H.;Kai, M.;Kubo, K.;Hiraga, A.;Asai, Y.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제17권7호
    • /
    • pp.973-979
    • /
    • 2004
  • The objectives of this study were to evaluate the digestible energy intake and energy expenditure in yearling horses on different training protocols (uphill- and level-track exercise training protocols). Twenty-four thoroughbred yearlings (12 males and 12 females, aged 27.0$\pm$0.9 months) were divided into two groups based on their training on two different tracks: the uphill (with a gradient of about 3%) training group (uphill training) and the level training group (level training). The digestible energy (DE) intake and energy expenditure (EE) during exercise were measured in both the groups. It was found that the DE intake in the uphill training and the level training groups was 5.1$\pm$3.1 and 36.9$\pm$4.8 Mcal/day, respectively. The EE during exercise in the two groups was 3.05$\pm$0.51 and 2.07 $\pm$0.56 Mcal, respectively. Thus, there was a significant difference in the EE (p<0.05), but not in the DE intake between the animals of the two training groups. The EE for a given intensity of exercise was greater in the uphill training group than in the level training group, but the DE intake was not affected by the exercise intensity. The DE intake was not generally affected by the intensity of exercise in this study, but a daily negative gain of body weight was observed in the uphill training group, particularly in the females. Thus, the energy requirement may be higher in yearlings undergoing uphill training than in those undergoing level training.

강우입자의 물리적 특성평가: 경기도 안성시 지역을 사례로 (Evaluating Physical Characteristics of Raindrop in Anseong, Gyeonggi Province)

  • 김진관;양동윤;김민석
    • 한국지형학회지
    • /
    • 제17권1호
    • /
    • pp.49-57
    • /
    • 2010
  • 한반도 중부에서의 강우사상 동안의 강우입자의 물리적 특성을 규명하고 강우강도와 강우에너지와의 관계를 도출하기 위해 2008년부터 2009년 사이에 3회에 걸쳐 경기도 안성시 고삼저수지 인근에서 laser-optical disdrometer를 이용하여 강우입자의 크기와 종말속도를 측정하였다. 측정된 강우입자의 크기분포와 강우입자의 종말속도를 이용하여 강우강도와 강우운동에너지 함유량(KE, Jm-2mm-1)과의 관계와 강우강도와 운동에너지 소비율(KER, Jm-2h-1)의 관계를 각각 제안하였다. 그리고 tipping-bucket 강우계로 측정한 강우강도를 disdrometer 의 강우강도로 보정해주는 관계도 제안하였다. 그리하여 본 연구에서 제안된 강우강도와 강우의 운동에너지와의 관계는 한반도 중부지방에서 5분 강우강도가 최대 40mmh-1 아래인 경우에 강우강도를 이용하여 강우의 운동에너지로 변환하고자 할 때 유용한 모델이 될 수 있을 것으로 판단된다.

복소음향인텐시티법을 이용한 HVAC의 소음원 검출 (Identification of Noise Source of the HVAC Using Complex Acoustic Intensity Method)

  • 양정직;이동주
    • 한국소음진동공학회논문집
    • /
    • 제20권11호
    • /
    • pp.1089-1096
    • /
    • 2010
  • The relation between the vibration induced from machinery and the radiated sound is complicated. Acoustic intensity method is widely used to obtain the accuracy of noise measurement and noise identification. In this study, as groundwork, the complex acoustic intensity method is performed to identify noise source and transmission path on different free space point source fields. As an industrial application, the complex acoustic intensity method is applied to HVAC to identify sound radiation characteristics in the near field. Experimental complex acoustic intensity method was applied to HVAC, it is possible to identify noise sources in complicated sound field characteristics which noise sources are related with each other, and certificate the validity of complex acoustic intensity. Especially, it can be seen that complex acoustic intensity method using both of active and reactive intensity is vital in devising a strategy for identification of noise. Also, the vector flow of acoustic intensity was investigated to identify sound intensity distributions and energy flow in the near field of HVAC.

진단용(診斷用) X선(線)의 반가층(半價層)에 관(關)한 연구(硏究) (A Study on Measurement of the Half Value Layer in Diagnostic X-ray)

  • 고신관
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제7권1호
    • /
    • pp.53-66
    • /
    • 1984
  • The quality of continuous x-ray beam depends upon the half value layer which varies according to the geometric conditions, the filtration thickness, and the amount of accelerated voltage (KVP). Experiments were conducted on the amount of electric energy that was changed to x-ray energy, and on the relationship between KVp and the intensity of x-rays. The results were as follows: 1. The amount of x-rays were not equal under the condition of the same exposure factor. 2. The intensity of x-rays was attenuated by an exponential function the geometric conditions were "good" and it was not when they were "poor". 3. The thicker the total filtration substance was and the higher the KVp was, the bigger the amount of x-ray energy was. 4. The homogeneity of medium energy x-ray was the best, when the total filtration substance was 3.9mm A1. 5. The mean energy of continuous x-ray was about 45% of KVp.

  • PDF

소형 인장 시험편 내의 크랙 전파에 대한 구조 안전해석 (Structural Safety Analysis on Crack Propagation in Compact Tension Specimen)

  • 조재웅
    • 한국융합학회논문지
    • /
    • 제5권1호
    • /
    • pp.23-27
    • /
    • 2014
  • 본 연구에서는 소형 인장 시험편에 편심된 집중하중을 가하였을 때, 크랙 주변에서의 구멍의 존재유무, 개수 및 위치에 따른 전파 거동에 대하여 규명하였다. 시뮬레이션 해석을 통하여 시험편에서 발생하는 Strain energy와 변형량, 응력에 대해 알 수 있었다. 그리고 이들 Strain energy와 변형량을 바탕으로 응력확대계수를 구하였으며, 본 연구결과를 이용하면 구조물 내에 결함이나 구멍 등이 있을 때 그 파괴 가능성을 검증할 수 있다고 사료된다.

환경구배에 따른 붉은강남콩 ( Phaseolus multiflorus Willd. ) 의 에너지와 무기원소의 분배 (Allocation of energy and nutrients in phaseolus multiflorus willd. on environmental gradients)

  • Kim, Ok-Kyung
    • The Korean Journal of Ecology
    • /
    • 제15권4호
    • /
    • pp.345-354
    • /
    • 1992
  • Allocation patterns of energy and mineral elements were investigated with phaseolus multiflorus grown in the environmental gradients. The result showed different energy allocation patterns according to relative light intensities and nutrients. The optimal switching time of energy allocation from vegetative to resproductive growth was delated as decreasing relative light intensity. The switch of the shift to reproduction was timed earlier in phosphorus treatment and delayed in nitrogen treatment. Analyzing the mineral elements to various organs, patterns of energy allocation were different from those of mineral allocation. There was no significant difference for allocation patterns in relative light intensity gradients. it was shown that n and p were distributed over the reproductive organs, k mainly in stems, ca in leaves and na in roots. mg was evenly distributed in each organs.

  • PDF