• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1998.04a
• /
• pp.319-326
• /
• 1998

Structural intensity of plates experiencing bending vibration is analytically evaluated using the modal analysis based on the assumed mode method. In the analysis, material internal loss and localized damping are considered. The power obtained by structural intensity integration over the circle containing the excitation source is compared with the power injected into plates to verify the accuracy of the presented method and; to evaluate the convergence of mode superposition. The intensity integration is carried out varying the circle radius and the integral step to investigate their effects in case of the power estimation using structural intensities. In addition, the dominant component among internal forces in the energy transfer by the bending vibration of a stiffened plate is investigated.

• Advances in Energy Research
• /
• v.4 no.2
• /
• pp.163-176
• /
• 2016

Rapid depletion of fossil based oil, coal and gas reserves and its greater demand day by day necessitates the search for other alternatives. Severe environmental impacts caused by the fossil fire based power plants and the escalating fuel costs are the major challenges faced by the electricity supply industry. Integration of Distributed Generators (DG) especially, wind and solar systems to the grid has been steadily increasing due to the concern of clean environment. This paper focuses on a new simple and fast load flow algorithm named Backward Forward Sweep Algorithm (BFSA) for finding the voltage profile and power losses with the integration of various sizes of DG at different locations. Genetic Algorithm (GA) based BFSA is adopted in finding the optimal location and sizing of DG to attain an improved voltage profile and considerable reduced power loss. Simulation results show that the proposed algorithm is more efficient in finding the optimal location and sizing of DG in 15-bus radial distribution system (RDS).The authenticity of the placement of optimized DG is assured with other DG placement techniques.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2004.10a
• /
• pp.19-26
• /
• 2004

This study constructs the reduced system by two-level condensation scheme. This scheme consists of two steps. First step selects the candidate area for the primary degrees of freedom by energy estimation in element level. In the second step, the primary degrees of freedom are selected by the sequential elimination scheme. The efficiency and reliability of this scheme is shown through the prediction of eigenvalues of a few numerical examples. Time integration in the reduced system can save the computing time effectively. The well-constructed reduced system can present the accurate behavior of the structure under arbitrary dynamic loads so much as the global system. Through the numerical example, the efficiency and reliability of the proposed scheme will be demonstrated.

• Journal of Information Display
• /
• v.12 no.4
• /
• pp.205-208
• /
• 2011

Herein, the integration of solution-processed polymer thin-film transistors (TFTs) that were fabricated using selective wettability through ultraviolet (UV) exposure into a reflective liquid crystal display is demonstrated. From the experimental results of energy-dispersive spectroscopy, the composition of carbon and fluorine enhancing the hydrophobicity in the polymer chains was found to play a critical role in the wetting selectivity upon UV exposure. The polymer TFTs fabricated through the wettability-patterning process exhibited long-term stability and reliability. This wetting-selectivity-based patterning technique will be useful for constructing different types of solution-processed electronic and optoelectronic devices.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.5B no.4
• /
• pp.358-365
• /
• 2005

In induction machine drive without a speed sensor, the estimation of the motor flux and speed often becomes deteriorated at low speeds with low back EMF. Our analysis shows that, in addition to the state resistance variation, the estimated value of field orientation angle is often corrupted by accumulative errors from the integration of voltage variables at motor terminals that have low signal/noise ratio at low frequencies. A repetitive loop path of integration in the feedback can amplify this type of error, thus speeding up the degradation process. The control system runs into information starvation due to the loss of correct field orientation. The machine's spiral vectors are controlled only in a reduced dimension in this situation. A novel control scheme is developed to improve the control performance of motor's current, torque and speed at low frequencies. The scheme gains a full-dimensional vector control and is less sensitive to the combined effect of the error sources at the low frequencies. Experimental tests demonstrate promising performances are achievable even below 0.5 Hz.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.12
• /
• pp.3007-3019
• /
• 1993

For the same configuration, the stiffness of 6-node two dimensional isoparametric is stiffer than that of 8-node two dimensional isoparametric element. This phenomenon may be called 'Relative Stiffness Stiffening Phenomenon.' In this paper, the relative stiffness stiffening phenomenon was studied, and could be corrected by modifying the position of Gauss integral points used in the numerical integration of the stiffness matrix. For the same deformation (bending) energy of 6-node and 8-node two dimensional isoparametric elements, Gauss integral points of 6-node element have to move closer, in comparison with those of 8-node element, in the case of numerical integration along the thickness direction.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2003.10a
• /
• pp.519-526
• /
• 2003

In this paper, a Fiber Bragg Grating (FRG) sensor system is described and FBGs are well-suited for long term and extremely severe experiments, where traditional strain gauges fail. In the system, a reflect wave-length measurement method which employs a tunable light source to find out the center wave-length of FBG sensor is used. We apply the FBG system to nuclear energy Power Plant for structural integrity test to measure the displacement of the structure under designed pressure and to check the elasticity of the structure by measuring the residual strain. The system works very well and it is expected that it can be used for a real-time strain. temperature and vibration detector of smart structure.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.2
• /
• pp.231-238
• /
• 2011

A role of Distribution Automation System(DAS) is required to be changed from observing and control to complex and various new system including functions which monitoring, control, prediction, operation and management of EMS type according to be gradually Smart Grid of distribution operation system for development of further power system industrial. IEC(International Electrotechnical Commission) published communication standards which interface and data model of distribution operation system to IEC 61968 and of host system like EMS(Energy Management System) to IEC 61970. So far, each standards are emphasizing themselves, but if they are applied by designed integration of the standards, it could be more efficiency system. So, in this paper, integration application of IEC standards and structure of further distribution operation system to use them are proposed by gradually increasing importance of communication protocols, functions and roles in further distribution management system considering Smart Grid.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.10
• /
• pp.35-43
• /
• 2012

In this paper, a development of agent-based IEDs(Intelligent electronic devices) for integration control of building microgrid in smart green building are proposed. To manage and control this complex energy system of smart green buildings, multi-agent system based networks is needed. Thus, several IEDs for utilizing multi-agent system are developed and modified for the their verification of performance as agent modules functions in the integrated experimental equipment. The good performance of these IED agents are verified from experimental results obtained from seamless bi-directional communication by SOAP/XML protocol between PC agent and IED agent.

• Proceedings of the KSR Conference
• /
• 2009.05b
• /
• pp.233-237
• /
• 2009

In this study, we suggest that several approaches to evaluate the collision acceleration value of a car in the article 35 and the guideline 16 of Korean rolling stock safety regulation. There are various methods to evaluate collision acceleration such as; a displacement comparison method by the double integration of filtered acceleration data, a velocity comparison method by the integration of filtered acceleration data, an analysis method of time-velocity curve, or a differential method of time-velocity curve. We compared these methods one another using 1D dynamic simulation model composed of nonlinear dampers, springs and bars, and masses. Also, we applied these methods to a hybrid model, which is made of 3D shell element model and 2D collision dynamics model, in order to evaluate whether 1D force-displacement curve modeling for energy absorbing structures have an effect on the collision acceleration levels or not.