• Journal of Microbiology and Biotechnology
• /
• v.28 no.3
• /
• pp.432-438
• /
• 2018

Microalgae hold promise as a renewable energy source for the production of biofuel, as they can convert light energy into chemical energy through photosynthesis. However, cost-efficient harvest of microalgae remains a major challenge to commercial-scale algal biofuel production. We first investigated the potential of electrolytic water as a flocculant for harvesting Tetraselmis sp. Alkaline electrolyzed water (AEW) is produced at the cathode through water electrolysis. It contains mineral ions such as $Na^+$, $K^+$, $Ca^{2+}$, and $Mg^{2+}$ that can act as flocculants. The flocculation activity with AEW was evaluated via culture density, AEW concentration, medium pH, settling time, and ionic strength analyses. The flocculation efficiency was 88.7% at 20% AEW (pH 8, 10 min) with a biomass concentration of 2 g/l. The initial biomass concentration and medium pH had significant influences on the flocculation activity of AEW. A viability test of flocculated microalgal cells was conducted using Evans blue stain, and the cells appeared intact. Furthermore, the growth rate of Tetraselmis sp. in recycled flocculation medium was similar to the growth rate in fresh F/2 medium. Our results suggested that AEW flocculation could be a very useful and affordable methodology for fresh biomass harvesting with environmentally friendly easy operation in part of the algal biofuel production process.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.2
• /
• pp.245-253
• /
• 2020

Objective: To develop the fermentation quality and chemical composition of alfalfa (Medicago sativa Lam.) silage, plants were inoculated with different lactic acid bacteria (LAB) strains at field 24 hours before harvest. Methods: The treatment groups were as follow: silage without additive as a control and inoculated with each strains of Lactobacillus brevis (LS-55-2-2), Leuconostoc citerum (L. citerum; L-70-6-1), Lactobacillus bifermentans (L. bifermentans; LS-65-2-1), Lactobacillus plantarum (L. plantarum; LS-3-3) and L. plantarum (LS-72-2). All the silages were stored at 25℃. Parameters such as pH, microorganism and volatile fatty acid contents, crude protein, neutral detergent fiber, acid detergent fiber, net gas, metabolizable energy, organic matter digestibility, dry matter intake and relative feed value were measured to determine fermentation quality, chemical compositions and relative feed value of alfalfa silages. Results: Significant differences were found among the control and treated groups in terms of pH and microorganism contents at all opening times and crude protein, net gas, metabolizable energy and organic matter digestibility of final silage. The pH values ranged from 4.70 to 5.52 for all treatments and control silage had the highest value of overall treatments at T₇₅d silages. Volatile fatty acid of silages was not influenced significantly by inoculations. However, lactic acid content of L. bifermentans (LS-65-2-1) was higher than the other treatments. The highest metabolizable energy and organic matter digestibility were recorded from L. citerum (L-70-6-1) inoculation. In addition, no significant differences were found among treatments in terms of neutral detergent fiber, acid detergent fiber, dry matter intake and relative feed value. Conclusion: Among the treated LAB isolates, L. bifermentans came into prominence especially in terms of organic acid composition and quality characters of silages.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.957-966
• /
• 1996

An attempt was made to measure the availability of waste heat, released from the cooling system of a small engine, which can be utilized for grain drying. An engine powered flat-bed rough rice dryer was constructed and the performance of the dryer with available engine-waste heat was analyzed for 10 , 20, 30 and 40 cm rough rice bulk depths with a constant dryer base area of 0.81$m^2$/min. The waste heat was sufficient to increase the drying air temperature 7 to 12$^{\circ}C$ at an air flow rate of 8.8 to 5.7㎥/min, while the average ambient temperature and relative humidity were 24$^{\circ}C$ and 70%. The minimum energy requirement was 3.26 MJ/kg of water removed in drying a 40 cm deep grain bed in 14h. A forty to fifty centimeter deep grained seems to be optimum in order to avoid over-drying in the top layers. On the basis of minimum energy requirement (3.26 MJ/kg ) , an estimation was made that the waste heat harvest from an engine of a power range of 1 to 10.5PS can dry about 0.1 to 1 metric on of rough rice from 23% to 15% m.c. (w.b) in 12 h at an average ambient temperature and relative humidity of $25^{\circ}C$ and 80%, respectively. The engine-waste heated grain dryer can be used in the rural areas of non industrialized countries where electricity is not available.

• Horticultural Science & Technology
• /
• v.16 no.2
• /
• pp.233-235
• /
• 1998

Energized-functional water (EFW) and powder (EFP) were manufactured by Kyungwon Institute of Life Science, Seoul, through a series of processes; tap water ultra-purification energy imprinting with catalysts in platinum columns mixing energy-imprinted water + activated zeolites + photosynthetic bacteria fermenting at $25^{\circ}C$ filtering EFW and/or EFP. A single application of EFP to soil under tree canopy before bud burst, combined with three EFW applications to soil during growth of 'Fuji' apples (Malus domestica Borkh.) resulted in a higher Ca concentrations in fruit skins and flesh, and lower Ca and N concentrations in leaves and shoot-bark tissues. EFW also stimulated the net photosynthesis of leaves and root activity. Soluble solid concentrations (SSC) and anthocyanin levels of fruits were also significantly increased at harvest, producing greater firmness and less core browning during storage at $0^{\circ}C$. However, there was no significant difference in titratable acidity of fruit juice between the EFW treatment and the controls.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.3
• /
• pp.619-626
• /
• 2019

The advances of semiconductor and circuitry technology dovetailed with nano processing techniques have further enhanced micro-miniaturization, sensitivity, longevity and reliability in MID(Medical Implant Device). Nevertheless, one of the remaining challenges is whether power can sufficiently and continuously be supplied for the operation of the MID. Self-powered MID that harvest biomechanical energy from human motion, respiratory and muscle movement are part of a paradigm shift. In this paper, we developed a rechargeable pacemaker through self-power generation with the triboelectric nanogenerator. We demonstrate a fully implanted pacemaker based on an implantable triboelectric nanogenerator, which act as a storage as well as active movement on a large-animal(dog) scale. The self-power pacemaker harvested from animal motion is 2.47V, which is higher than the required pacemaker device sensing voltage(1.35V).

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.267-270
• /
• 2014

This paper presents a CMOS interface circuit for vibration energy harvesting. The proposed circuit consists of an AC-DC converter and a DC-DC boost converter. The AC-DC converter rectifies the AC signals from vibration devices(PZT), and the DC-DC boost converter generates a boosted and regulated output at a predefined level. A full-wave rectifier using active diodes is used as the AC-DC converter for high efficiency, and a schottky diode type DC-DC boost converter is used for a simple control circuitry. A MPPT(Maximum Power Point Tracking) control is also employed to harvest the maximum power from the PZT. The proposed circuit has been designed in a 0.35um CMOS process. The chip area is $530um{\times}325um$. Simulation results shows that the maximum efficiencies of the AC-DC converter and DC-DC boost converter are 97.7% and 89.2%, respectively. The maximum efficiency of the entire system is 87.2%.

• Journal of the Korean Electrochemical Society
• /
• v.22 no.3
• /
• pp.79-86
• /
• 2019

Most of low-grad heat (< $200^{\circ}C$) generated from industrial process and human body, is abandoned as waste heat. To harvest the waste heat, the thermoelectrics (TE) technology has been widely investigated so far. However, TE suffers from poor performance and high material cost. As an alternative to the TE device, the thermoelectrical cell (TEC) is gaining growing attention these days. The TEC features several advantages such as high Seebeck coefficient, low cost and design flexibility compared to TE, but its commercial viability was limited by its low heat-to-electricity conversion efficiency. However, recent reports have demonstrated that the performance of TEC can be markedly improved by employing novel electrode/electrolyte materials and by optimizing cell design. This article summarizes the recent progress of TECs in terms of the redox couples, electrolyte solvents and additives, electrode materials and cell design.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.6D
• /
• pp.675-683
• /
• 2009

A Basic experimental study for the development of vibration-power generation system from the vibration energy of urban infrastructure, such as a railroad, highway, and bridges, was carried out to harvest electricity from moving vehicles. Starting with the proposal of vibration power generator which converts vibration energy to an electric power by using self-induction technology, the research explains the basic concept of self-induction technology and the dynamic characteristics of a ibration power generator. Also, in order to analyze the correlation of an electromotive force from vibration power generator which depends on external force and vibration speeds, many indoor experiments with various variables were achieved. Based on the experimental results, a vibration power generator system's ability were analyzed. With those results, basic data of vibration power generator system to acquire the maximum available power was confirmed.

• Journal of Radiation Protection and Research
• /
• v.21 no.1
• /
• pp.51-58
• /
• 1996

Underground migration of $^{54}Mn,\;^{60}Co,\;^{85}Sr\;and\;^{137}Cs$ in paddy and upland conditions was studied through two years' greenhouse experiment. At early and late growth stages of rice, soybean, Chinese cabbage and radish, a mixed solution of the radionuclides was applied to the water or soil surfaces of the culture boxes filled with an acidic loamy-sandy soil for the upper 20cm. Soil was sampled in layers upto $15{\sim}20cm$ down after harvest. Soil concentrations of the radionuclides decreased exponentially with increasing soil depth and more than 80% of the radioactivities remained in top $3{\sim}4cm$. The mobility of the radionuclides decreased in the order of $^{85}Sr>^{54}Mn>^{60}Co{\geq}^{137}Cs$. Downward migrations of the radionuclides were the greatest in rice soil and the lowest in soybean soil which was fertilized with the least amount of N, P and K. Differences in depth profiles between two application times indicate that the amount of daily migration from $0{\sim}1cm$ layer to the lower area decreases with increasing time after deposition. By a simultaneous addition of KCl and lime following the earlier application, downward migration in soybean, Chinese cabbage and radish soils changed little or retarded more or less but that in rice soil accelerated a little.

• Journal of Biosystems Engineering
• /
• v.33 no.6
• /
• pp.390-395
• /
• 2008

Current high oil price and the agreement on global climate change prevention have increased worldwide investment and research on renewable energy. In Korea, development of a rapeseed dryer for bio-diesel production has been started in 2007. Usually, rapeseeds are harvested in early summer, because rice cultivation is followed right after rapeseed harvesting. Early harvest and bad summer results in highly moistured rapeseed and development of artificial drying system is required to dry great amount of rapeseed that couldn't be processed by sun drying alone. The rapeseed dryer was modified from an existing circulation type grain dryer. Modification of the dryer was performed with the aid of CFD simulation. Drying test showed that drying rate of rapeseed was 1.51%/h and germination rate reduction was 4.5%p for the drying temperature of $60^{\circ}C$.